Git Repository

Let us change our traditional attitude to the construction of programs: Instead of imagining that our main task is to instruct a computer what to do, let us concentrate rather on explaining to human beings what we want a computer to do. — Donald Knuth

1. Introduction

Customising an editor can be very rewarding … until you have to leave it. For years I have been looking for ways to avoid this pain. Then I discovered vim-anywhere, and found that it had an Emacs companion, emacs-anywhere. To me, this looked most attractive.

Separately, online I have seen the following statement enough times I think it’s a catchphrase

Redditor 1: I just discovered this thing, isn’t it cool.
Redditor 2: Oh, there’s an Emacs mode for that.

This was enough for me to install Emacs, but I soon learned there are far more compelling reasons to keep using it.

I tried out the spacemacs distribution a bit, but it wasn’t quite to my liking. Then I heard about doom emacs and thought I may as well give that a try. TLDR; it’s great.

Now I’ve discovered the wonders of literate programming, and am becoming more settled by the day. This is both my config, and a cautionary tale (just replace “Linux” with “Emacs” in the comic below).

Cautionary

1.1. Why Emacs?

Emacs is not a text editor, this is a common misnomer. It is far more apt to describe Emacs as a Lisp machine providing a generic user-centric text manipulation environment. That’s quite a mouthful. In simpler terms one can think of Emacs as a platform for text-related applications. It’s a vague and generic definition because Emacs itself is generic.

Good with text. How far does that go? A lot further than one initially thinks:

Ideally, one may use Emacs as the interface to perform input → transform → output cycles, i.e. form a bridge between the human mind and information manipulation.

1.1.1. The enveloping editor

Emacs allows one to do more in one place than any other application. Why is this good?

  • Enables one to complete tasks with a consistent, standard set of keybindings, GUI and editing methods — learn once, use everywhere
  • Reduced context-switching
  • Compressing the stages of a project — a more centralised workflow can progress with greater ease
  • Integration between tasks previously relegated to different applications, but with a common subject — e.g. linking to an email in a to-do list

Emacs can be thought of as a platform within which various elements of your workflow may settle, with the potential for rich integrations between them — a life IDE if you will.

Today, many aspects of daily computer usage are split between different applications which act like islands, but this often doesn’t mirror how we actually use our computers. Emacs, if one goes down the rabbit hole, can give users the power to bridge this gap.

Graph of possible Emacs task integrations
Figure 1: Some sample workflow integrations that can be used within Emacs

1.1.2. Some notably unique features

  • Recursive editing
  • Completely introspectable, with pervasive docstrings
  • Mutable environment, which can be incrementally modified
  • Functionality without applications
  • Client-server separation allows for a daemon, giving near-instant perceived startup time.

1.1.3. Issues

  • Emacs has irritating quirks
  • Some aspects are showing their age (naming conventions, APIs)
  • Emacs is (mostly) single-threaded, meaning that when something holds that thread up the whole application freezes
  • A few other nuisances

1.1.4. Teach a man to fish…

Give a man a fish, and you feed him for a day. Teach a man to fish, and you feed him for a lifetime. — Anne Isabella

Most popular editors have a simple and pretty settings interface, filled with check-boxes, selects, and the occasional text-box. This makes it easy for the user to pick between common desirable behaviours. To me this is now like giving a man a fish.

What if you want one of those ’check-box’ settings to be only on in certain conditions? Some editors have workspace settings, but that requires you to manually set the value for every single instance. Urgh, what a pain.

What if you could set the value of that ’check-box’ setting to be the result of an arbitrary expression evaluated for each file? This is where an editor like Emacs comes in. Configuration for Emacs isn’t a list of settings in JSON etc. it’s an executable program which modifies the behaviour of the editor to suit your liking. This is ’teaching a man to fish’.

Emacs is built in the same language you configure it in (Emacs Lisp, or elisp). It comes with a broad array of useful functions for text-editing, and Doom adds a few handy little convenience functions.

Want to add a keybinding to delete the previous line? It’s as easy as

Keybinding to delete the previous lineEmacs Lisp
#
(map! "C-d"
      (cmd! (previous-line)
            (kill-line)
            (forward-line)))

How about another example, say you want to be presented with a list of currently open buffers (think files, almost) when you split the window. It’s as simple as

Prompt for buffer after splitEmacs Lisp
#
(defadvice! prompt-for-buffer (&rest _)
  :after 'window-split (switch-to-buffer))

Want to test it out? You don’t need to save and restart, you can just evaluate the expression within your current Emacs instance and try it immediately! This editor is, after all, a Lisp interpreter.

Want to tweak the behaviour? Just re-evaluate your new version — it’s a super-tight iteration loop.

1.2. Editor comparison

Real Programmers

Over the years I have tried out (spent at least a year using as my primary editor) the following applications

  • Python IDLE
  • Komodo Edit
  • Brackets
  • VSCode
  • and now, Emacs

I have attempted to quantify aspects of my impressions of them below.

Editor Extensibility Ecosystem Ease of Use Comfort Completion Performance
IDLE 1 1 3 1 1 2
VSCode 3 3 4 3.5 4 3
Brackets 2.5 2 3 3 2.5 2
Emacs 4 4 2 4 3.5 3
Komodo Edit 2 1 3 2 2 2
Radar chart comparing my thoughts on a few editors.

1.3. Notes for the unwary adventurer

If you like the look of this, that’s marvellous, and I’m really happy that I’ve made something which you may find interesting, however:

This config is insidious. Copying the whole thing blindly can easily lead to undesired effects. I recommend copying chunks instead.

If you are so bold as to wish to steal bits of my config (or if I upgrade and wonder why things aren’t working), here’s a list of sections which rely on external setup (i.e. outside of this config).

dictionary
I’ve downloaded a custom SCOWL dictionary, which I use in ispell. If this causes issues, just delete the (setq ispell-dictionary ...) bit.

There are also a number of files I may tangle to other than {init,config,package}.el. The complete list (excluding confpkg generated files) is as follows:

  • ~/.config/doom.orgdev/config.el
  • ~/.config/doom.orgdev/init.el
  • ~/.config/doom.orgdev/packages.el
  • ~/.config/doom/cli.el
  • ~/.config/doom/init.el
  • ~/.config/doom/misc/mbsync-imapnotify.py
  • ~/.config/doom/misc/org-export-header.html
  • ~/.config/doom/packages.el
  • ~/.config/doom/setup.sh
  • ~/.config/emacs/profiles.el
  • ~/.config/inkscape/palettes/Emacs Fancy Splash.gpl
  • ~/.config/systemd/user/emacs.service
  • ~/.config/systemd/user/goimapnotify@.service
  • ~/.config/systemd/user/mbsync.service
  • ~/.config/systemd/user/mbsync.timer
  • ~/.local/bin/e
  • ~/.local/bin/emacsmail
  • ~/.local/share/applications/emacs-client.desktop
  • ~/.local/share/applications/emacsmail.desktop
  • ~/.local/share/mime/packages/julia.xml
  • ~/.local/share/mime/packages/org.xml

Oh, did I mention that I started this config when I didn’t know any elisp, and this whole thing is a hack job? If you can suggest any improvements, please do so, no matter how much criticism you include I’ll appreciate it :)

Code Quality

1.3.1. Extra Requirements

The lovely doom doctor is good at diagnosing most missing things, but here are a few extras.

  • A LaTeX Compiler is required for the mathematics rendering performed in Org, and by CalcTeX.
  • I use the Overpass font as a go-to sans serif. It’s used as my doom-variable-pitch-font and in the graph generated by Roam. I have chosen it because it possesses a few characteristics I consider desirable, namely:
    • A clean, and legible style. Highway-style fonts tend to be designed to be clear at a glance, and work well with a thicker weight, and this is inspired by Highway Gothic.
    • It’s slightly quirky. Look at the diagonal cut on stems for example. Helvetica is a masterful design, but I like a bit more pizzazz now and then.
  • A few LSP servers. Take a look at init.el to see which modules have the +lsp flag.

1.4. Current Issues

1.4.1. Magit push in daemon

Quite often trying to push to a remote in the Emacs daemon produces as error like this:

fundamental
#
128 git … push -v origin refs/heads/master\:refs/heads/master
Pushing to git@github.com:tecosaur/emacs-config.git

fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

1.4.2. Unread emails doesn’t work across Emacs instances

It would be nice if it did, so that I could have the Emacs-daemon hold the active mu4e session, but still get that information. In this case I’d want to change the action to open the Emacs daemon, but it should be possible.

This would probably involve hooking into the daemon’s modeline update function to write to a temporary file, and having a file watcher started in other Emacs instances, in a similar manner to Rebuild mail index while using mu4e.

2. Rudimentary configuration

2.1. Confpkg

2.1.1. Motivation

Previously, all of my configuration was directly tangled into config.el. This almost satisfies my use. Occasionally though, I’d want to apply or extract a specific bit of my config in an elisp script, such as some of my Org-export customisations. This is a hassle, either loading my entire config (of which 90% simply complicates the state), or manually copying the relevant code in pieces, one source block at a time (just a different kind of hassle). While I’d like to think my config is “greater than the sum of its parts”, much of it can be safely clumped into self-contained packets of functionality.

One afternoon I thought “wouldn’t it be nice if I could just load a few of those self-contained chunks of my config”, then I started thinking about how I could have that and config.el. This is the result.

2.1.2. Design

It’s already natural to organise blocks of config under sections, and we can use :noweb-ref with a header-args:emacs-lisp property to direct all child source blocks into a single parent. We could have two parents, one tangling to subconf/config-X.el and the other to config.el, however this will duplicate any evaluations required to generate the content, which isn’t great (particularly for things which take a moment, like checking for LaTeX packages). Instead we can just write to the subconf/* files and then at the end of tangling extract their contents into config.el.

DAG showing code block info go to config-*.el files then config.el
Figure 2: Flow of code information from the literate config into the generated files.

To set this up within each section, instead of manually repeating a common form we can generate the form and supply the relevant section properties via a babel call keyword, like so:

Org mode
#
* Subject

#+call: confpkg("subject")

#+begin_src emacs-lisp
;; Code that configures the subject...
#+end_src

This isn’t entirely straightforward, but with some mild abuse of noweb and babel we can make it work!

2.1.3. Preparation

This approach is built around #+call invocations that affect the tangling. Unfortunately for this use-case, babel call keywords are not executed on tangle. Tangled noweb blocks are however, and so we can fudge the behaviour we want by tangling a noweb block to a temp file, with a noweb block that executes babel calls in the buffer.

confpkg-prepareEmacs Lisp
#
(condition-case nil
    (progn
      (message "Intitialising confpkg")
      <<bootstrap>>
      (org-fold-core-ignore-fragility-checks
        (org-babel-map-executables nil
          (when (eq (org-element-type (org-element-context)) 'babel-call)
            (org-babel-lob-execute-maybe)))))
  (quit (revert-buffer t t t)))

See the 2.1.12 section for an explanation of the <<bootstrap>> noweb reference.

Emacs Lisp
#
<<confpkg-prepare()>>

2.1.4. Setup

Before generating the template with babel, we want to keep track of:

  • How many config groups are created
  • Information about each config group

To do this we can simply create two variables. Due to temp-buffer shenanigans, we’ll have to use global variables here.

Then we need to set up the two final phases of this process:

  • Creating config.el
  • Cleaning up the superfluous generated content

To trigger the final phases we’ll add a hook to org-babel-post-tangle-hook. Once again, it would be preferred if this was done locally, but it needs to be global. To avoid this causing headaches down the line we’ll make sure when implementing the hook function to have it remove itself from the hook when executed.

confpkg-setupEmacs Lisp
#
(setq confpkg--num 0
      confpkg--list nil)

<<confpkg-dependency-analysis>>
<<confpkg-strip-package-statements>>
<<confpkg-create-config>>
(defun confpkg-cleanup ()
 <<confpkg-cleanup>>
  )
<<confpkg-finaliser>>

<<confpkg-clear-old-files>>

(add-hook 'org-babel-tangle-finished-hook #'confpkg-tangle-finalise)

To avoid generating cruft, it would also be good to get rid of old tangled config files at the start.

confpkg-clear-old-filesEmacs Lisp
#
(make-directory "subconf" t)
(dolist (conf-file (directory-files "subconf" t "config-.*\\.el"))
  (delete-file conf-file))

Now to have this take effect, we can just use a babel call keyword. Thanks to the preparation step this will be executed during tangling.

2.1.5. Package generation

Now we actually implement the confpkg babel function. We could just direct the output into the subconf/config-X.el file without any extra steps, but why not be a bit fancier and make it more like a package.

To do this, we’ll have confpkg load a template and then fill it in using format-spec. To make sure this is actually used, we’ll call org-set-property to modify the parent heading, and register the config group with the variables we created earlier.

confpkgelisp
#
;; Babel block for use with #+call
;; Arguments:
;;  - name, the name of the config sub-package
;;  - needs, (when non-empty) required system executable(s)
;;  - after, required features
;;  - pre, a noweb reference to code that should be executed eagerly,
;;    and not deferred via after. The code is not included in the
;;    generated .el file and should only be used in dire situations.
;;  - prefix, the package prefix ("config-" by default)
;;  - via, how this configuration should be included in config.el,
;;    the current options are:
;;    + "copy", copy the configuration lisp
;;    + "require", insert a require statement
;;    + "none", do not do anything to load this configuration.
;;      This only makes sense when configuration is either being
;;      temporarily disabled or loaded indirectly/elsewhere.
(when (or (string-empty-p needs)
          (cl-every #'executable-find (delq nil (split-string needs ","))))
  (let* ((name (if (string-empty-p name)
                   (save-excursion
                     (and (org-back-to-heading-or-point-min t)
                          (substring-no-properties
                           (org-element-interpret-data
                            (org-element-property :title (org-element-at-point))))))
                 name))
         (after
          (cond
           ((string-empty-p after) nil)
           ((string-match-p "\\`[^()]+\\'" after)
            (intern after)) ; Single feature.
           (t after)))
         (pre (and (not (string-empty-p pre)) pre))
         (confpkg-name
          (concat prefix (replace-regexp-in-string
                          "[^a-z-]" "-" (downcase name))))
         (confpkg-file (expand-file-name (concat confpkg-name ".el")
                                         "subconf")))
    (unless (file-exists-p confpkg-file)
      (make-empty-file confpkg-file t))
    (cl-incf confpkg--num)
    (org-set-property
     "header-args:emacs-lisp"
     (format ":tangle no :noweb-ref %s" confpkg-name))
    (push (list :name name
                :package confpkg-name
                :file confpkg-file
                :after after
                :pre pre
                :via (intern via))
          confpkg--list)
    (format-spec
     "#+begin_src emacs-lisp :tangle %f :mkdirp yes :noweb no-export :noweb-ref none :comments no
<<confpkg-template>>
#+end_src"
     `((?n . ,confpkg--num)
       (?p . ,confpkg-name)
       (?f . ,confpkg-file)
       (?Y . ,(format-time-string "%Y"))
       (?B . ,(format-time-string "%B"))
       (?m . ,(format-time-string "%m"))
       (?d . ,(format-time-string "%d"))
       (?M . ,(format-time-string "%M"))
       (?S . ,(format-time-string "%S"))))))

Now all that’s needed is a template to be used.

confpkg-templateEmacs Lisp
#
;;; %p.el --- Generated package (no.%n) from my config -*- lexical-binding: t; -*-
;;
;; Copyright (C) %Y TEC
;;
;; Author: TEC <https://git.tecosaur.net/tec>
;; Maintainer: TEC <contact@tecosaur.net>
;; Created: %B %d, %Y
;; Modified: %B %d, %Y
;; Version: %Y.%m.%d
;; Homepage: https://git.tecosaur.net/tec/emacs-config
;; Package-Requires: ((emacs \"27.1\"))
;;
;; This file is not part of GNU Emacs.
;;
;;; Commentary:
;;
;;  Generated package (no.%n) from my config.
;;
;;  This is liable to have unstated dependencies, and reply on other bits of
;;  state from other configuration blocks. Only use this if you know /exactly/
;;  what you are doing.
;;
;;  This may function nicely as a bit of self-contained functionality, or it
;;  might be a horrid mix of functionalities and state.
;;
;;  Hopefully, in future static analysis will allow this to become more
;;  properly package-like.
;;
;;; Code:

<<%p>>

(provide '%p)
;;; %p.el ends here

This currently makes the included content look much more package-like that in truly is. However, I hope that some static analysis in future will allow for dependency information to be collected and included.

Lastly, should there be an issue or interruption, it’s possible that the modifications from #+call: confpkg may persist. If I’ve been good with my committing, resolving this should be as simple as reverting unstaged changes. So… back in reality, it would be nice to have a way to clean up confpkg residue.

confpkg-cleanupEmacs Lisp
#
(org-fold-core-ignore-fragility-checks
  (org-babel-map-executables nil
    (when (and (eq (org-element-type (org-element-context)) 'babel-call)
               (equal (org-element-property :call (org-element-context)) "confpkg"))
      (org-babel-remove-result)
      (org-entry-delete nil "header-args:emacs-lisp"))))

2.1.6. Identify cross-package dependencies

At a basic level, we can search for regexp expressions indicating the definition of functions or variables and search for their usage.

Emacs Lisp
#
(defun confpkg--rough-extract-definitions (file)
  (with-temp-buffer
    (insert-file-contents file)
    (goto-char (point-min))
    (let (symbols)
      (while (re-search-forward
              (rx line-start (* (any ?\s ?\t)) "("
                  (or "defun" "defmacro" "defsubst" "defgeneric" "defalias" "defvar" "defcustom" "defface" "deftheme"
                      "cl-defun" "cl-defmacro" "cl-defsubst" "cl-defmethod" "cl-defstruct" "cl-defgeneric" "cl-deftype")
                  (+ (any ?\s ?\t))
                  (group (+ (any "A-Z" "a-z" "0-9"
                                 ?+ ?- ?* ?/ ?_ ?~ ?! ?@ ?$ ?% ?^ ?& ?= ?: ?< ?> ?{ ?})))
                  (or blank ?\n))
              nil t)
        (push (match-string 1) symbols))
      symbols)))

Continuing our rough regexp approach, we can construct a similar function to look for uses of symbols.

Emacs Lisp
#
(defun confpkg--rough-uses-p (file symbols)
  (with-temp-buffer
    (insert-file-contents file)
    (let ((symbols (copy-sequence symbols)) uses-p)
      (while symbols
        (goto-char (point-min))
        (if (re-search-forward (rx word-start (literal (car symbols)) word-end) nil t)
            (setq uses-p t symbols nil)
          (setq symbols (cdr symbols))))
      uses-p)))

Now we can put these two functions together to annotate confpkg--list with their (confpkg) dependencies.

Emacs Lisp
#
(defun confpkg-annotate-list-dependencies ()
  (dolist (confpkg confpkg--list)
    (plist-put confpkg :defines
               (confpkg--rough-extract-definitions
                (plist-get confpkg :file))))
  (dolist (confpkg confpkg--list)
    (let ((after (plist-get confpkg :after))
          requires)
      (dolist (other-confpkg confpkg--list)
        (when (and (not (eq other-confpkg confpkg))
                   (confpkg--rough-uses-p (plist-get confpkg :file)
                                          (plist-get other-confpkg :defines)))
          (push (plist-get other-confpkg :package) requires)))
      (when (and after (symbolp after))
        (push after requires))
      (plist-put confpkg :requires requires))))

Finally, we can use this information to edit the confpkg files to add the necessary require statements.

Emacs Lisp
#
(defun confpkg-write-dependencies ()
  (dolist (confpkg confpkg--list)
    (when (plist-get confpkg :requires)
      (with-temp-buffer
        (setq buffer-file-name (plist-get confpkg :file))
        (insert-file-contents buffer-file-name)
        (re-search-forward "^;;; Code:\n")
        (insert "\n")
        (dolist (req (plist-get confpkg :requires))
          (insert (format "(require '%s)\n" req)))
        (write-region nil nil buffer-file-name)
        (set-buffer-modified-p nil)))))

2.1.7. Commenting out package! statements

It’s easy enough to set package! statements to tangle to packages.el, however with our noweb ref approach they will also go to the config files. This could be viewed as a problem, but I actually think it’s rather nice to have the package information with the config. So, we can look for an immediate package! statement and simply comment it out.

confpkg-strip-package-statementsEmacs Lisp
#
(defun confpkg-comment-out-package-statements ()
  (dolist (confpkg confpkg--list)
    (with-temp-buffer
      (setq buffer-file-name (plist-get confpkg :file))
      (insert-file-contents buffer-file-name)
      (goto-char (point-min))
      (while (re-search-forward "^;;; Code:\n[[:space:]\n]*(\\(package!\\|unpin!\\) " nil t)
        (let* ((start (progn (beginning-of-line) (point)))
               (end (progn (forward-sexp 1)
                           (if (looking-at "[\t ]*;.*")
                               (line-end-position)
                             (point))))
               (contents (buffer-substring start end))
               paste-start paste-end
               (comment-start ";")
               (comment-padding "   ")
               (comment-end ""))
          (delete-region start (1+ end))
          (re-search-backward "^;;; Code:")
          (beginning-of-line)
          (insert ";;  Package statement:\n")
          (setq paste-start (point))
          (insert contents)
          (setq paste-end (point))
          (insert  "\n;;\n")
          (comment-region paste-start paste-end 2)))
      (when (buffer-modified-p)
        (write-region nil nil buffer-file-name)
        (set-buffer-modified-p nil)))))

2.1.8. Creating the config file

After all the subconfig files have been tangled, we need to collect their content and put them together into config.el. For this, all that’s needed is a function to go through the registered config groups and put their content in a tempbuffer. We can call this with the finalising step.

confpkg-create-configEmacs Lisp
#
(defun confpkg-create-config ()
  (let ((revert-without-query '("config\\.el"))
        (keywords (org-collect-keywords '("AUTHOR" "EMAIL")))
        (original-buffer (current-buffer)))
    (with-temp-buffer
      (insert
       (format ";;; config.el -*- lexical-binding: t; -*-

;; SPDX-FileCopyrightText: © 2020-%s %s <%s>
;; SPDX-License-Identifier: MIT

;; Generated at %s from the literate configuration.

(add-to-list 'load-path %S)\n"
               (format-time-string "%Y")
               (cadr (assoc "AUTHOR" keywords))
               (cadr (assoc "EMAIL" keywords))
               (format-time-string "%FT%T%z")
               (expand-file-name "subconf/")))
      (mapc
       (lambda (confpkg)
         (insert
          (if (eq 'none (plist-get confpkg :via))
              (format "\n;;; %s intentionally omitted.\n" (plist-get confpkg :name))
            (with-temp-buffer
              (cond
               ((eq 'copy (plist-get confpkg :via))
                (insert-file-contents (plist-get confpkg :file))
                (goto-char (point-min))
                (narrow-to-region
                 (re-search-forward "^;;; Code:\n+")
                 (progn
                   (goto-char (point-max))
                   (re-search-backward (format "[^\n\t ][\n\t ]*\n[\t ]*(provide '%s)" (plist-get confpkg :package)))
                   (match-end 0))))
               ((eq 'require (plist-get confpkg :via))
                (insert (format "(require '%s)\n" (plist-get confpkg :package))))
               (t (insert (format "(warn \"%s confpkg :via has unrecognised value: %S\" %S %S)"
                                  (plist-get confpkg :name) (plist-get confpkg :via)))))
              (goto-char (point-min))
              (insert "\n;;:------------------------"
                      "\n;;; " (plist-get confpkg :name)
                      "\n;;:------------------------\n\n")
              (when (plist-get confpkg :defines)
                (insert ";; This block defines "
                        (mapconcat
                         (lambda (d) (format "`%s'" d))
                         (plist-get confpkg :defines)
                         ", ")
                        ".")
                (when (re-search-backward "\\([^, ]+\\), \\([^, ]+\\), \\([^, ]+\\).\\="
                                          (line-beginning-position) t)
                  (replace-match "\\1, \\2, and \\3."))
                (when (re-search-backward "\\([^, ]+\\), \\([^, ]+\\).\\="
                                          (line-beginning-position) t)
                  (replace-match "\\1 and \\2."))
                (insert "\n\n")
                (forward-line -2)
                (setq-local comment-start ";")
                (fill-comment-paragraph)
                (forward-paragraph 1)
                (forward-line 1))
              (if (equal (plist-get confpkg :package) "config-confpkg-timings")
                  (progn
                    (goto-char (point-max))
                    (insert "\n\n\
(confpkg-create-record 'doom-pre-config (float-time (time-subtract (current-time) before-init-time)))
(confpkg-start-record 'config)
(confpkg-create-record 'config-defered 0.0 'config)
(confpkg-create-record 'set-hooks 0.0 'config-defered)
(confpkg-create-record 'load-hooks 0.0 'config-defered)
(confpkg-create-record 'requires 0.0 'root)\n"))
                (let ((after (plist-get confpkg :after))
                      (pre (and (plist-get confpkg :pre)
                                (org-babel-expand-noweb-references
                                 (list "emacs-lisp"
                                       (format "<<%s>>" (plist-get confpkg :pre))
                                       '((:noweb . "yes")
                                         (:comments . "none")))
                                 original-buffer)))
                      (name (replace-regexp-in-string
                             "config--?" ""
                             (plist-get confpkg :package))))
                  (if after
                      (insert (format "(confpkg-with-record '%S\n"
                                      (list (concat "hook: " name) 'set-hooks))
                              (if pre
                                  (concat ";; Begin pre\n" pre "\n;; End pre\n")
                                "")
                              (format (if (symbolp after) ; If single feature.
                                          "  (with-eval-after-load '%s\n"
                                        "  (after! %s\n")
                                      after))
                    (when pre
                      (insert "\n;; Begin pre (unnecesary since after is unused)\n"
                              pre
                              "\n;; End pre\n")))
                  (insert
                   (format "(confpkg-with-record '%S\n"
                           (list (concat "load: " name)
                                 (if after 'load-hooks 'config)))))
                (goto-char (point-max))
                (when (string-match-p ";" (thing-at-point 'line))
                  (insert "\n"))
                (insert ")")
                (when (plist-get confpkg :after)
                  (insert "))"))
                (insert "\n"))
              (buffer-string)))))
       (let ((confpkg-timings ;; Ensure timings is put first.
              (cl-some (lambda (p) (and (equal (plist-get p :package) "config-confpkg-timings") p))
                       confpkg--list)))
         (append (list confpkg-timings)
                 (nreverse (remove confpkg-timings confpkg--list)))))
      (insert "\n(confpkg-finish-record 'config)\n\n;;; config.el ends here")
      (write-region nil nil "config.el" nil :silent))))

Applying lexical binding to the config file is good for a number of reasons, among which it’s (slightly) faster than dynamic binding (see this blog post for more info).

2.1.9. Quieter output

All the babel evaluation here ends up being quite noisy (along with a few other things during tangle), let’s see if we can change that.

confpkg-quieter-outputEmacs Lisp
#
(when noninteractive
  (unless (fboundp 'doom-shut-up-a)
    (defun doom-shut-up-a (fn &rest args)
      (let ((standard-output #'ignore)
            (inhibit-message t))
        (apply fn args))))
  (advice-add 'org-babel-expand-body:emacs-lisp :around #'doom-shut-up-a)
  ;; Quiet some other annoying messages
  (advice-add 'sh-set-shell :around #'doom-shut-up-a)
  (advice-add 'rng-what-schema :around #'doom-shut-up-a)
  (advice-add 'python-indent-guess-indent-offset :around #'doom-shut-up-a))

2.1.10. Reporting load time information

When generating the config we added a form to collect load-time information.

Emacs Lisp
#
(defvar confpkg-load-time-tree (list (list 'root)))
(defvar confpkg-record-branch (list 'root))
(defvar confpkg-record-num 0)

It would be good to process confpkg-load-times at the end to make it more useful, and provide a function to display load time information from it. This is to aid in identification of confpkgs that take particularly long to load, and thus would benefit from some attention.

To extract the per-confpkg load times, we can just take the difference in (float-time) and exclude the first entry.

Emacs Lisp
#
(defun confpkg-create-record (name elapsed &optional parent enclosing)
  (let ((parent (assoc (or parent (car confpkg-record-branch))
                       confpkg-load-time-tree))
        (record (cons name (list (list 'self
                                       :name (format "%s" name)
                                       :num (cl-incf confpkg-record-num)
                                       :elapsed elapsed
                                       :enclosing enclosing)))))
    (push record confpkg-load-time-tree)
    (push record (cdr parent))
    record))

(defun confpkg-start-record (name &optional parent)
  (let ((record (confpkg-create-record name 0.0e+NaN parent t)))
    (plist-put (cdadr record) :start (float-time))
    (push name confpkg-record-branch)
    record))

(defun confpkg-finish-record (name)
  (let ((self-record (cdar (last (cdr (assoc name confpkg-load-time-tree))))))
    (plist-put self-record :elapsed
               (- (float-time) (plist-get self-record :start) 0.0))
    (unless (equal (car confpkg-record-branch) name)
      (message "Warning: Confpkg timing record expected to finish %S, instead found %S. %S"
               name (car confpkg-record-branch) confpkg-record-branch))
    (setq confpkg-record-branch (cdr confpkg-record-branch))))

A convenience macro could be nice to have.

Emacs Lisp
#
(defmacro confpkg-with-record (name &rest body)
  "Create a time record around BODY.
The record must have a NAME."
  (declare (indent 1))
  (let ((name-val (make-symbol "name-val"))
        (record-spec (make-symbol "record-spec")))
    `(let* ((,name-val ,name)
            (,record-spec (if (consp ,name-val) ,name-val (list ,name-val))))
       (apply #'confpkg-start-record ,record-spec)
       (unwind-protect
           (progn ,@body)
         (confpkg-finish-record (car ,record-spec))))))

It would also be nice to collect some other load-time-related information.

Emacs Lisp
#
(defadvice! +require--log-timing-a (orig-fn feature &optional filename noerror)
  :around #'require
  (if (or (featurep feature)
          (eq feature 'cus-start) ; HACK Why!?!
          (assoc (format "require: %s" feature) confpkg-load-time-tree))
      (funcall orig-fn feature filename noerror)
    (confpkg-with-record (list (format "require: %s" feature)
                               (and (eq (car confpkg-record-branch) 'root)
                                    'requires))
      (funcall orig-fn feature filename noerror))))

At last, we’ll go to some pains to make a nice result tabulation function.

I will readily admit that this function is absolutely horrible. I just spent an evening adding to it till it worked then stopped touching it. Maybe in the future I’ll go back to it and try to clean up the implementation.

Emacs Lisp
#
(defun confpkg-timings-report (&optional sort-p node)
  "Display a report on load-time information.
Supply SORT-P (or the universal argument) to sort the results.
NODE defaults to the root node."
  (interactive
   (list (and current-prefix-arg t)))
  (let ((buf (get-buffer-create "*Confpkg Load Time Report*"))
        (depth 0)
        num-pad name-pad max-time max-total-time max-depth)
    (cl-labels
        ((sort-records-by-time
          (record)
          (let ((self (assoc 'self record)))
            (append (list self)
                    (sort (nreverse (remove self (cdr record)))
                          (lambda (a b)
                            (> (or (plist-get (alist-get 'self a) :total) 0.0)
                               (or (plist-get (alist-get 'self b) :total) 0.0)))))))
         (print-record
          (record)
          (cond
           ((eq (car record) 'self)
            (insert
             (propertize
              (string-pad (number-to-string (plist-get (cdr record) :num)) num-pad)
              'face 'font-lock-keyword-face)
             " "
             (propertize
              (apply #'concat
                     (make-list (1- depth) "• "))
              'face 'font-lock-comment-face)
             (string-pad (format "%s" (plist-get (cdr record) :name)) name-pad)
             (make-string (* (- max-depth depth) 2) ?\s)
             (propertize
              (format "%.4fs" (plist-get (cdr record) :elapsed))
              'face
              (list :foreground
                    (doom-blend 'orange 'green
                                (/ (plist-get (cdr record) :elapsed) max-time))))
             (if (= (plist-get (cdr record) :elapsed)
                    (plist-get (cdr record) :total))
                 ""
               (concat "   (Σ="
                       (propertize
                        (format "%.3fs" (plist-get (cdr record) :total))
                        'face
                        (list :foreground
                              (doom-blend 'orange 'green
                                          (/ (plist-get (cdr record) :total) max-total-time))))
                       ")"))
             "\n"))
           (t
            (cl-incf depth)
            (mapc
             #'print-record
             (if sort-p
                 (sort-records-by-time record)
               (reverse (cdr record))))
            (cl-decf depth))))
         (flatten-records
          (records)
          (if (eq (car records) 'self)
              (list records)
            (mapcan
             #'flatten-records
             (reverse (cdr records)))))
         (tree-depth
          (records &optional depth)
          (if (eq (car records) 'self)
              (or depth 0)
            (1+ (cl-reduce #'max (cdr records) :key #'tree-depth))))
         (mapreduceprop
          (list map reduce prop)
          (cl-reduce
           reduce list
           :key
           (lambda (p) (funcall map (plist-get (cdr p) prop)))))
         (elaborate-timings
          (record)
          (if (eq (car record) 'self)
              (plist-get (cdr record) :elapsed)
            (let ((total (cl-reduce #'+ (cdr record)
                                    :key #'elaborate-timings))
                  (self (cdr (assoc 'self record))))
              (if (plist-get self :enclosing)
                  (prog1
                      (plist-get self :elapsed)
                    (plist-put self :total (plist-get self :elapsed))
                    (plist-put self :elapsed
                               (- (* 2 (plist-get self :elapsed)) total)))
                (plist-put self :total total)
                total))))
         (elaborated-timings
          (record)
          (let ((record (copy-tree record)))
            (elaborate-timings record)
            record)))
      (let* ((tree
              (elaborated-timings
               (append '(root)
                       (copy-tree
                        (alist-get (or node 'root)
                                   confpkg-load-time-tree
                                   nil nil #'equal))
                       '((self :num 0 :elapsed 0)))))
             (flat-records
              (cl-remove-if
               (lambda (rec) (= (plist-get (cdr rec) :num) 0))
               (flatten-records tree))))
        (setq max-time (mapreduceprop flat-records #'identity #'max :elapsed)
              max-total-time (mapreduceprop flat-records #'identity #'max :total)
              name-pad (mapreduceprop flat-records #'length #'max :name)
              num-pad (mapreduceprop flat-records
                                     (lambda (n) (length (number-to-string n)))
                                     #'max :num)
              max-depth (tree-depth tree))
        (with-current-buffer buf
          (erase-buffer)
          (setq-local outline-regexp "[0-9]+ *\\(?:\\)*")
          (outline-minor-mode 1)
          (use-local-map (make-sparse-keymap))
          (local-set-key "TAB" #'outline-toggle-children)
          (local-set-key "\t" #'outline-toggle-children)
          (local-set-key (kbd "<backtab>") #'outline-show-subtree)
          (local-set-key (kbd "C-<iso-lefttab>")
                         (eval `(cmd! (if current-prefix-arg
                                          (outline-show-all)
                                        (outline-hide-sublevels (+ ,num-pad 2))))))
          (insert
           (propertize
            (concat (string-pad "#" num-pad) " "
                    (string-pad "Confpkg"
                                (+ name-pad (* 2 max-depth) -3))
                    (format " Load Time (Σ=%.3fs)\n"
                            (plist-get (cdr (assoc 'self tree)) :total)))
            'face '(:inherit (tab-bar-tab bold) :extend t :underline t)))
          (dolist (record (if sort-p
                              (sort-records-by-time tree)
                            (reverse (cdr tree))))
            (unless (eq (car record) 'self)
              (print-record record)))
          (set-buffer-modified-p nil)
          (goto-char (point-min)))
        (pop-to-buffer buf)))))

2.1.11. Finalise

At last, to clean up the content inserted by the babel calls we can just revert the buffer. As long as org-babel-pre-tangle-hook hasn’t been modified, save-buffer will be run at the start of the tangle process and so reverting will take us back to just before the tangle started.

Since this is the function added as the post-tangle hook, we also need to remove the function from the hook and call the config.el creation function.

confpkg-finaliserEmacs Lisp
#
(defun confpkg-tangle-finalise ()
  (remove-hook 'org-babel-tangle-finished-hook #'confpkg-tangle-finalise)
  (revert-buffer t t t)
  (confpkg-comment-out-package-statements)
  (confpkg-annotate-list-dependencies)
  (confpkg-create-config)
  (confpkg-write-dependencies)
  (message "Processed %s elisp files" (length confpkg--list)))

Within confpkg-tangle-finalise we carefully order each step so that the most important steps go first, to minimise the impact should a particular step fail.

2.1.12. Bootstrap

This system makes use of some recent commits introduced to Org, such as this noweb expansion bugfix which will be included in Org 9.5.4. This is problematic if using Emacs 28.2 or older, so to get around this we must go through a bootstrap process.

Fixing Problems

To start with, we’ll check if we are:

  • Running an Org version prior to 9.5.4
  • Running in a noninteractive session
  • Using an Org that’s not installed in the user directory
  • In a session with the symbol exit! defined
bootstrapEmacs Lisp
#
(let ((required-org-version "9.5.4")
      (standard-output t))
  (when (and (version< (org-version) required-org-version)
             (not (string-match-p (regexp-quote (expand-file-name "~"))
                                  (locate-library "org"))))
    (cond
     ((and noninteractive (fboundp 'exit!))
      (print! (warn (format "Detected conditions provoking a config bootstrap (Org %s)" (org-version))))
      (print! (start "Initiating bootstrap..."))
      <<bootstrap-perform>>
      )
     (t (message "Installed Org version %s is too old, %s is needed.\nRun \"doom sync\" to fix."
                 (org-version) required-org-version)))))

If these conditions are met, we can assume that the loaded Org version is insufficient, and that it’s likely a Emacs is currently running a command like doom sync, and so it makes sense to perform the 3-step bootstrap.

  1. Temporarily rename config.org to config.original.org.
  2. Create a new config.org that when tangled results in Org being installed.
  3. Swap back to the original config.org, and re-sync.
bootstrap-performEmacs Lisp
#
(print! (item "Temporarily relocating config.org to config.original.org"))
(rename-file "config.org" "config.original.org" t)
<<boostrap-create-transient-config>>
(print! (item "%s") (bold "Re-running sync"))
(exit! :restart) ; Re-run =doom sync= with the transient config.

With the approach worked out, we just need to generate a snipped that will create a new config.org that when tangled:

  • Tangles our Org recipe to packages.el
  • Swaps back to the original config.org
  • Re-runs doom sync
boostrap-create-transient-configEmacs Lisp
#
(print! (item "Creating minimal init.el"))

(let ((standard-output #'ignore))
  (with-temp-buffer
    (insert
     ";;; init.el -*- lexical-binding: t; -*-\n\n"
     (pp (quote
          <<bootstrap-init>>
          )))
    (write-region nil nil "init.el")))

(print! (item "Creating boostrap config.el"))

(let ((standard-output #'ignore))
  (with-temp-buffer
    (insert
     (org-element-interpret-data
      (list
       '(keyword (:key "title" :value "Boostrap Stage 1 Config" :post-blank 1))
       `(src-block
         (:language "emacs-lisp"
          :value ,(pp (quote (progn
                               <<boostrap-transition>>
                               )))
          :name "bootstrap-transition"
          :post-blank 1))
       `(src-block
         (:language "emacs-lisp"
          :parameters
          ,(concat ":noweb no-export "
                   ":tangle (expand-file-name (make-temp-name \"emacs-org-babel-excuses/confpkg-prepare-\") temporary-file-directory) "
                   ":mkdirp yes")
          :value ,(concat "<<" ; Split to avoid (prematurely) creating a noweb reference.
                          "bootstrap-transition()"
                          ">>\n"))))))
    (write-region nil nil "config.org")))

For the bootstrap we need a minimal init.el, just the literate module should be sufficient.

bootstrap-initEmacs Lisp
#
(doom! :config literate)

This config.org simply provides an entry point for us to run elisp during tangle. We just need to make use of it to install Org and re-sync the original configuration.

boostrap-transitionEmacs Lisp
#
(setq standard-output t)

(print! (start "Starting second stage of the bootstrap."))
(print! (item "Creating minimal packages.el"))

(let ((standard-output #'ignore))
  (with-temp-buffer
    (insert
     ";; -*- no-byte-compile: t; -*-\n\n"
     (pp (quote
          <<org-pkg-statement()>>
          )))
    (write-region nil nil "packages.el")))

(doom-packages-install)

(print! (item "Switching back to original config.org"))
(rename-file "config.original.org" "config.org" t)

(print! (item "%s") (bold "Re-running sync"))
(exit! :restart)

There we go, that should do the trick, so long as we call the bootstrap block at the start of the tangle process. This is done by calling bootstrap within the confpkg preparation stage.

2.2. Personal Information

It’s useful to have some basic personal information

Emacs Lisp
#
(setq user-full-name "pratikvn"
      user-mail-address "pratikvn@protonmail.com")

Apparently this is used by GPG, and all sorts of other things.

Speaking of GPG, I want to use ~/.authinfo.gpg instead of the default in ~/.config/emacs. Why? Because my home directory is already cluttered, so this won’t make a difference, and I don’t want to accidentally purge this file (I have done . I also want to cache as much as possible, as my home machine is pretty safe, and my laptop is shutdown a lot.

Emacs Lisp
#
(setq auth-sources '("~/.authinfo.gpg")
      auth-source-cache-expiry nil) ; default is 7200 (2h)

2.3. Better defaults

2.3.1. Simple settings

Inspired by a few sources of modified defaults (such as angrybacon/dotemacs) and my own experiences, I’ve ended up with a small set of tweaks on top of the changes Doom makes:

Emacs Lisp
#
(setq-default
 delete-by-moving-to-trash t                      ; Delete files to trash
 window-combination-resize t                      ; take new window space from all other windows (not just current)
 x-stretch-cursor t)                              ; Stretch cursor to the glyph width

(setq undo-limit 80000000                         ; Raise undo-limit to 80Mb
      evil-want-fine-undo t                       ; By default while in insert all changes are one big blob. Be more granular
      evil-want-C-i-jump nil
      auto-save-default t                         ; Nobody likes to loose work, I certainly don't
      truncate-string-ellipsis "…"                ; Unicode ellispis are nicer than "...", and also save /precious/ space
      password-cache-expiry nil                   ; I can trust my computers ... can't I?
      ;; scroll-preserve-screen-position 'always     ; Don't have `point' jump around
      scroll-margin 2                             ; It's nice to maintain a little margin
      display-time-default-load-average nil)      ; I don't think I've ever found this useful

(display-time-mode 1)                             ; Enable time in the mode-line

(unless (string-match-p "^Power N/A" (battery))   ; On laptops...
  (display-battery-mode 1))                       ; it's nice to know how much power you have

(global-subword-mode 1)                           ; Iterate through CamelCase words

2.3.2. Frame sizing

It’s nice to control the size of new frames, when launching Emacs that can be done with . After the font size adjustment during initialisation this works out to be 102x31.

Thanks to hotkeys, it’s easy for me to expand a frame to half/full-screen, so it makes sense to be conservative with the sizing of new frames.

Then, for creating new frames within the same Emacs instance, we’ll just set the default to be something roughly 80% of that size.

Emacs Lisp
#
(add-to-list 'default-frame-alist '(height . 24))
(add-to-list 'default-frame-alist '(width . 80))

2.3.3. Auto-customisations

By default changes made via a customisation interface are added to init.el. I prefer the idea of using a separate file for this. We just need to change a setting, and load it if it exists.

Emacs Lisp
#
(setq-default custom-file (expand-file-name ".custom.el" doom-private-dir))
(when (file-exists-p custom-file)
  (load custom-file))

2.3.4. Windows

I find it rather handy to be asked which buffer I want to see after splitting the window. Let’s make that happen.

First, we’ll enter the new window

Emacs Lisp
#
(setq evil-vsplit-window-right t
      evil-split-window-below t)

Then, we’ll pull up a buffer prompt.

Emacs Lisp
#
(defadvice! prompt-for-buffer (&rest _)
  :after '(evil-window-split evil-window-vsplit)
  (consult-buffer))

Window rotation is nice, and can be found under SPC w r and SPC w R. Layout rotation is also nice though. Let’s stash this under SPC w SPC, inspired by Tmux’s use of C-b SPC to rotate windows.

We could also do with adding the missing arrow-key variants of the window navigation/swapping commands.

Emacs Lisp
#
(map! :map evil-window-map
      "SPC" #'rotate-layout
      ;; Navigation
      "<left>"     #'evil-window-left
      "<down>"     #'evil-window-down
      "<up>"       #'evil-window-up
      "<right>"    #'evil-window-right
      ;; Swapping windows
      "C-<left>"       #'+evil/window-move-left
      "C-<down>"       #'+evil/window-move-down
      "C-<up>"         #'+evil/window-move-up
      "C-<right>"      #'+evil/window-move-right)

2.3.5. Buffer defaults

I’d much rather have my new buffers in org-mode than fundamental-mode, hence

Emacs Lisp
#
;; (setq-default major-mode 'org-mode)

For some reason this + the mixed pitch hook causes issues with hydra and so I’ll just need to resort to SPC b o for now.

2.4. Doom configuration

2.4.1. Modules

Doom has this lovely modular configuration base that takes a lot of work out of configuring Emacs. Each module (when enabled) can provide a list of packages to install (on doom sync) and configuration to be applied. The modules can also have flags applied to tweak their behaviour.

init.elEmacs Lisp
#
;;; init.el -*- lexical-binding: t; -*-

;; This file controls what Doom modules are enabled and what order they load in.
;; Press 'K' on a module to view its documentation, and 'gd' to browse its directory.

(doom! :input
       <<doom-input>>

       :completion
       <<doom-completion>>

       :ui
       <<doom-ui>>

       :editor
       <<doom-editor>>

       :emacs
       <<doom-emacs>>

       :term
       <<doom-term>>

       :checkers
       <<doom-checkers>>

       :tools
       <<doom-tools>>

       :os
       <<doom-os>>

       :lang
       <<doom-lang>>

       :email
       <<doom-email>>

       :app
       <<doom-app>>

       :config
       <<doom-config>>
       )
2.4.1.1. Structure

As you may have noticed by this point, this is a literate configuration. Doom has good support for this which we access though the literate module.

While we’re in the :config section, we’ll use Dooms nicer defaults, along with the bindings and smartparens behaviour (the flags aren’t documented, but they exist).

doom-configEmacs Lisp
#
literate
(default +bindings +smartparens)
2.4.1.2. Interface

There’s a lot that can be done to enhance Emacs’ capabilities. I reckon enabling half the modules Doom provides should do it.

doom-completionEmacs Lisp
#
(company                     ; the ultimate code completion backend
 +childframe)                ; ... when your children are better than you
;;helm                       ; the *other* search engine for love and life
;;ido                        ; the other *other* search engine...
;; (ivy                      ; a search engine for love and life
;;  +icons                   ; ... icons are nice
;;  +prescient)              ; ... I know what I want(ed)
(vertico +icons)             ; the search engine of the future
doom-uiEmacs Lisp
#
;;deft                       ; notational velocity for Emacs
doom                         ; what makes DOOM look the way it does
doom-dashboard               ; a nifty splash screen for Emacs
doom-quit                    ; DOOM quit-message prompts when you quit Emacs
(emoji +unicode)             ; 🙂
;;fill-column                ; a `fill-column' indicator
hl-todo                      ; highlight TODO/FIXME/NOTE/DEPRECATED/HACK/REVIEW
;;hydra                      ; quick documentation for related commands
;;indent-guides              ; highlighted indent columns, notoriously slow
(ligatures +extra)           ; ligatures and symbols to make your code pretty again
;;minimap                    ; show a map of the code on the side
modeline                     ; snazzy, Atom-inspired modeline, plus API
nav-flash                    ; blink the current line after jumping
;;neotree                    ; a project drawer, like NERDTree for vim
ophints                      ; highlight the region an operation acts on
(popup                       ; tame sudden yet inevitable temporary windows
 +all                        ; catch all popups that start with an asterix
 +defaults)                  ; default popup rules
;;(tabs                      ; an tab bar for Emacs
;;  +centaur-tabs)           ; ... with prettier tabs
treemacs                     ; a project drawer, like neotree but cooler
;;unicode                    ; extended unicode support for various languages
(vc-gutter +pretty)          ; vcs diff in the fringe
vi-tilde-fringe              ; fringe tildes to mark beyond EOB
(window-select +numbers)     ; visually switch windows
workspaces                   ; tab emulation, persistence & separate workspaces
zen                          ; distraction-free coding or writing
doom-editorEmacs Lisp
#
(evil +everywhere)           ; come to the dark side, we have cookies
file-templates               ; auto-snippets for empty files
fold                         ; (nigh) universal code folding
(format)                     ; automated prettiness
;;god                        ; run Emacs commands without modifier keys
;;lispy                      ; vim for lisp, for people who don't like vim
multiple-cursors             ; editing in many places at once
;;objed                      ; text object editing for the innocent
;;parinfer                   ; turn lisp into python, sort of
rotate-text                  ; cycle region at point between text candidates
snippets                     ; my elves. They type so I don't have to
;;word-wrap                  ; soft wrapping with language-aware indent
doom-emacsEmacs Lisp
#
(dired +icons)               ; making dired pretty [functional]
electric                     ; smarter, keyword-based electric-indent
(ibuffer +icons)             ; interactive buffer management
undo                         ; persistent, smarter undo for your inevitable mistakes
vc                           ; version-control and Emacs, sitting in a tree
doom-termEmacs Lisp
#
;;eshell                     ; the elisp shell that works everywhere
;;shell                      ; simple shell REPL for Emacs
;;term                       ; basic terminal emulator for Emacs
vterm                        ; the best terminal emulation in Emacs
doom-checkersEmacs Lisp
#
syntax                       ; tasing you for every semicolon you forget
;;(:if (executable-find "aspell") spell) ; tasing you for misspelling mispelling
;;grammar                      ; tasing grammar mistake every you make
doom-toolsEmacs Lisp
#
ansible                      ; a crucible for infrastructure as code
biblio                       ; Writes a PhD for you (citation needed)
;;debugger                   ; FIXME stepping through code, to help you add bugs
;;direnv                     ; be direct about your environment
docker                       ; port everything to containers
editorconfig               ; let someone else argue about tabs vs spaces
;;ein                        ; tame Jupyter notebooks with emacs
(eval +overlay)              ; run code, run (also, repls)
;;gist                       ; interacting with github gists
(lookup                      ; helps you navigate your code and documentation
 +dictionary                 ; dictionary/thesaurus is nice
 +docsets)                   ; ...or in Dash docsets locally
(lsp)                          ; Language Server Protocol
;;macos                      ; MacOS-specific commands
(magit                       ; a git porcelain for Emacs
 +forge)                     ; interface with git forges
make                         ; run make tasks from Emacs
pass                       ; password manager for nerds
pdf                          ; pdf enhancements
;;prodigy                    ; FIXME managing external services & code builders
rgb                          ; creating color strings
;;taskrunner                 ; taskrunner for all your projects
;;terraform                  ; infrastructure as code
;;tmux                       ; an API for interacting with tmux
;;tree-sitter                ; syntax and parsing, sitting in a tree...
upload                       ; map local to remote projects via ssh/ftp
doom-osEmacs Lisp
#
tty                          ; improve the terminal Emacs experience
2.4.1.3. Language support

We can be rather liberal with enabling support for languages as the associated packages/configuration are (usually) only loaded when first opening an associated file.

doom-langEmacs Lisp
#
;;agda                       ; types of types of types of types...
;;beancount                  ; mind the GAAP
;;(cc +lsp)                  ; C > C++ == 1
;;clojure                    ; java with a lisp
;;common-lisp                ; if you've seen one lisp, you've seen them all
;;coq                        ; proofs-as-programs
;;crystal                    ; ruby at the speed of c
;;csharp                     ; unity, .NET, and mono shenanigans
data                         ; config/data formats
;;(dart +flutter)            ; paint ui and not much else
;;dhall                      ; JSON with FP sprinkles
;;elixir                     ; erlang done right
;;elm                        ; care for a cup of TEA?
emacs-lisp                   ; drown in parentheses
;;erlang                     ; an elegant language for a more civilized age
ess                          ; emacs speaks statistics
;;faust                      ; dsp, but you get to keep your soul
;;fsharp                     ; ML stands for Microsoft's Language
;;fstar                      ; (dependent) types and (monadic) effects and Z3
;;gdscript                   ; the language you waited for
;;(graphql +lsp)             ; Give queries a REST
(go +lsp)                    ; the hipster dialect
;;(haskell +lsp)             ; a language that's lazier than I am
;;hy                         ; readability of scheme w/ speed of python
;;idris                      ;
json                         ; At least it ain't XML
;;(java +lsp)                ; the poster child for carpal tunnel syndrome
(javascript +lsp)            ; all(hope(abandon(ye(who(enter(here))))))
(julia +lsp)                 ; Python, R, and MATLAB in a blender
;;kotlin                     ; a better, slicker Java(Script)
(latex                       ; writing papers in Emacs has never been so fun
 +latexmk                    ; what else would you use?
 +cdlatex                    ; quick maths symbols
 +fold)                      ; fold the clutter away nicities
;;lean                       ; proof that mathematicians need help
;;factor                     ; for when scripts are stacked against you
;;ledger                     ; an accounting system in Emacs
lua                          ; one-based indices? one-based indices
markdown                     ; writing docs for people to ignore
;;nim                        ; python + lisp at the speed of c
nix                          ; I hereby declare "nix geht mehr!"
;;ocaml                      ; an objective camel
(org                         ; organize your plain life in plain text
 +dragndrop                  ; drag & drop files/images into org buffers
 ;;+hugo                     ; use Emacs for hugo blogging
 +noter                      ; enhanced PDF notetaking
 +jupyter                    ; ipython/jupyter support for babel
 +pandoc                     ; export-with-pandoc support
 +gnuplot                    ; who doesn't like pretty pictures
 ;;+pomodoro                 ; be fruitful with the tomato technique
 +present                    ; using org-mode for presentations
 +roam2)                     ; wander around notes
;;php                        ; perl's insecure younger brother
;;plantuml                   ; diagrams for confusing people more
;;purescript                 ; javascript, but functional
(python +lsp +pyright)       ; beautiful is better than ugly
;;qt                         ; the 'cutest' gui framework ever
;;racket                     ; a DSL for DSLs
;;raku                       ; the artist formerly known as perl6
;;rest                       ; Emacs as a REST client
;;rst                        ; ReST in peace
;;(ruby +rails)              ; 1.step {|i| p "Ruby is #{i.even? ? 'love' : 'life'}"}
(rust +lsp)                  ; Fe2O3.unwrap().unwrap().unwrap().unwrap()
;;scala                      ; java, but good
scheme                       ; a fully conniving family of lisps
sh                           ; she sells {ba,z,fi}sh shells on the C xor
;;sml                        ; no, the /other/ ML
;;solidity                   ; do you need a blockchain? No.
;;swift                      ; who asked for emoji variables?
;;terra                      ; Earth and Moon in alignment for performance.
web                          ; the tubes
yaml                         ; JSON, but readable
;;zig                        ; C, but simpler
2.4.1.4. Input
doom-inputEmacs Lisp
#
;;bidi                       ; (tfel ot) thgir etirw uoy gnipleh
;;chinese
;;japanese
;;layout                     ; auie,ctsrnm is the superior home row
2.4.1.5. Everything in Emacs

It’s just too convenient being able to have everything in Emacs. I couldn’t resist the Email and Feed modules.

doom-emailEmacs Lisp
#
(:if (executable-find "mu") (mu4e +org))
;;notmuch
;;(wanderlust +gmail)
doom-appEmacs Lisp
#
;;calendar                   ; A dated approach to timetabling
;;emms                       ; Multimedia in Emacs is music to my ears
everywhere                   ; *leave* Emacs!? You must be joking.
irc                          ; how neckbeards socialize
(rss +org)                   ; emacs as an RSS reader
;;twitter                    ; twitter client https://twitter.com/vnought

2.4.2. Profiles

Doom has support for multiple configuration profiles. For general usage, this isn’t a particularly useful feature, but for niche use cases it’s fantastic.

Emacs Lisp
#
((orgdev (env ("DOOMDIR" . "~/.config/doom.orgdev"))))
2.4.2.1. Org development profile

For development purposes, it’s handy to have a more minimal config without my many customisations and interacting packages. Let’s go ahead and create a near-minimal new config:

Emacs Lisp
#
;;; init.el -*- lexical-binding: t; -*-
(doom! :completion vertico
       :editor evil
       :config (default +bindings))
Emacs Lisp
#
(unpin! org) ; there be bugs
Emacs Lisp
#
(require 'org)
(load-theme 'modus-operandi t)

2.4.3. Visual Settings

2.4.3.1. Font Face

’Fira Code’ is nice, and ’Overpass’ makes for a nice sans companion. We just need to fiddle with the font sizes a tad so that they visually match. Just for fun I’m trying out JetBrains Mono though. So far I have mixed feelings on it, some aspects are nice, but on others I prefer Fira.

Emacs Lisp
#
(setq doom-font (font-spec :family "Source Code Pro" :size 13)
      doom-big-font (font-spec :family "Source Code Pro" :size 16)
      doom-variable-pitch-font (font-spec :family "Source Code Pro" :size 16)
      doom-unicode-font (font-spec :family "Source Code Pro")
      doom-serif-font (font-spec :family "Source Code Pro" :weight 'light))
Screenshot of the fonts within Emacs.

In addition to these fonts, Merriweather is used with nov.el, and Alegreya as a serifed proportional font used by mixed-pitch-mode for writeroom-mode with Org files.

Because we care about how things look let’s add a check to make sure we’re told if the system doesn’t have any of those fonts.

detect-missing-fontsEmacs Lisp
#
(defvar required-fonts '("Source Code Pro" "Alegreya"))

(defvar available-fonts
  (delete-dups (or (font-family-list)
                   (split-string (shell-command-to-string "fc-list : family")
                                 "[,\n]"))))

(defvar missing-fonts
  (delq nil (mapcar
             (lambda (font)
               (unless (delq nil (mapcar (lambda (f)
                                           (string-match-p (format "^%s$" font) f))
                                         available-fonts))
                 font))
             required-fonts)))

(if missing-fonts
    (pp-to-string
     `(unless noninteractive
        (add-hook! 'doom-init-ui-hook
          (run-at-time nil nil
                       (lambda ()
                         (message "%s missing the following fonts: %s"
                                  (propertize "Warning!" 'face '(bold warning))
                                  (mapconcat (lambda (font)
                                               (propertize font 'face 'font-lock-variable-name-face))
                                             ',missing-fonts
                                             ", "))
                         (sleep-for 0.5))))))
  ";; No missing fonts detected")
Emacs Lisp
#
<<detect-missing-fonts()>>

This way whenever fonts are missing, after Doom’s UI has initialised, a warning listing the missing fonts should appear for at least half a second.

2.4.3.2. Theme

doom-one is nice and all, but I find the vibrant variant nicer.

Emacs Lisp
#
(setq doom-theme 'doom-gruvbox)
;;(remove-hook 'window-setup-hook #'doom-init-theme-h)
;;(add-hook 'after-init-hook #'doom-init-theme-h 'append)
;;(delq! t custom-theme-load-path)

Oh, and with the nice selection doom provides there’s no reason for me to want the defaults.

Emacs Lisp
#
(delq! t custom-theme-load-path)

Lastly, I had some issues with theme race conditions, which seem to be resolved by moving doom-init-theme-h around. Henrik attempted to help with this in May 2021 but we didn’t manage to pin down the issue. It may be worth periodically checking back and seeing if this is still needed.

Emacs Lisp
#
(remove-hook 'window-setup-hook #'doom-init-theme-h)
(add-hook 'after-init-hook #'doom-init-theme-h 'append)
2.4.3.3. Line numbers

Relative line numbers are fantastic for knowing how far away line numbers are, then ESC 12 <UP> gets you exactly where you think. Personal pref: I prefer absolute numbering.

Emacs Lisp
#
(setq display-line-numbers-type 'absolute)
(global-display-line-numbers-mode)
2.4.3.4. Miscellaneous

2.4.4. Some helper macros

There are a few handy macros added by doom, namely

  • load! for loading external .el files relative to this one
  • use-package! for configuring packages
  • add-load-path! for adding directories to the load-path where Emacs looks when you load packages with require or use-package
  • map! for binding new keys

2.4.5. Allow babel execution in CLI actions

In this config I sometimes generate code to include in my config. This works nicely, but for it to work with doom sync et. al. I need to make sure that Org doesn’t try to confirm that I want to allow evaluation (I do!).

Thankfully Doom supports $DOOMDIR/cli.el file which is sourced every time a CLI command is run, so we can just enable evaluation by setting org-confirm-babel-evaluate to nil there. While we’re at it, we should silence org-babel-execute-src-block to avoid polluting the output.

Emacs Lisp
#
;;; cli.el -*- lexical-binding: t; -*-
(setq org-confirm-babel-evaluate nil)

(defun doom-shut-up-a (orig-fn &rest args)
  (quiet! (apply orig-fn args)))

(advice-add 'org-babel-execute-src-block :around #'doom-shut-up-a)

2.4.6. Elisp REPL

I think an elisp REPL sounds like a fun idea, even if not a particularly useful one 😛. We can do this by adding a new command in cli.el.

Emacs Lisp
#
(defcli! repl ((in-rlwrap-p ("--rl") "For internal use only."))
  "Start an elisp REPL."
  (require 'core-start)
  (when (and (executable-find "rlwrap") (not in-rlwrap-p))
    ;; For autocomplete
    (setq autocomplete-file "/tmp/doom_elisp_repl_symbols")
    (unless (file-exists-p autocomplete-file)
      (princ "\e[0;33mInitialising autocomplete list...\e[0m\n")
      (with-temp-buffer
        (cl-do-all-symbols (s)
          (let ((sym (symbol-name s)))
            (when (string-match-p "\\`[[:ascii:]][[:ascii:]]+\\'" sym)
              (insert sym "\n"))))
        (write-region nil nil autocomplete-file)))
    (princ "\e[F")
    (exit! "rlwrap" "-f" autocomplete-file
           (concat doom-emacs-dir "bin/doom") "repl" "--rl"))

  (doom-initialize-packages)
  (require 'engrave-faces-ansi)
  (setq engrave-faces-ansi-color-mode '3-bit)

  ;; For some reason (require 'parent-mode) doesn't work :(
  (defun parent-mode-list (mode)
    "Return a list of MODE and all its parent modes.

The returned list starts with the parent-most mode and ends with MODE."
    (let ((result ()))
      (parent-mode--worker mode (lambda (mode)
                                  (push mode result)))
      result))
  (defun parent-mode--worker (mode func)
    "For MODE and all its parent modes, call FUNC.

FUNC is first called for MODE, then for its parent, then for the parent's
parent, and so on.

MODE shall be a symbol referring to a function.
FUNC shall be a function taking one argument."
    (funcall func mode)
    (when (not (fboundp mode))
      (signal 'void-function (list mode)))
    (let ((modefunc (symbol-function mode)))
      (if (symbolp modefunc)
          ;; Hande all the modes that use (defalias 'foo-parent-mode (stuff)) as
          ;; their parent
          (parent-mode--worker modefunc func)
        (let ((parentmode (get mode 'derived-mode-parent)))
          (when parentmode
            (parent-mode--worker parentmode func))))))
  (provide 'parent-mode)
  ;; Some extra highlighting (needs parent-mode)
  (require 'rainbow-delimiters)
  (require 'highlight-quoted)
  (require 'highlight-numbers)
  (setq emacs-lisp-mode-hook '(rainbow-delimiters-mode
                               highlight-quoted-mode
                               highlight-numbers-mode))
  ;; Pretty print
  (defun pp-sexp (sexp)
    (with-temp-buffer
      (cl-prettyprint sexp)
      (emacs-lisp-mode)
      (font-lock-ensure)
      (with-current-buffer (engrave-faces-ansi-buffer)
        (princ (string-trim (buffer-string)))
        (kill-buffer (current-buffer)))))
  ;; Now do the REPL
  (defvar accumulated-input nil)
  (while t
    (condition-case nil
        (let ((input (if accumulated-input
                         (read-string "\e[31m .\e[0m  ")
                       (read-string "\e[31mλ:\e[0m "))))
          (setq input (concat accumulated-input
                              (when accumulated-input "\n")
                              input))
          (cond
           ((string-match-p "\\`[[:space:]]*\\'" input)
            nil)
           ((string= input "exit")
            (princ "\n") (kill-emacs 0))
           (t
            (condition-case err
                (let ((input-sexp (car (read-from-string input))))
                  (setq accumulated-input nil)
                  (pp-sexp (eval input-sexp))
                  (princ "\n"))
              ;; Caused when sexp in unbalanced
              (end-of-file (setq accumulated-input input))
              (error
               (cl-destructuring-bind (backtrace &optional type data . _)
                   (cons (doom-cli--backtrace) err)
                 (princ (concat "\e[1;31mERROR:\e[0m " (get type 'error-message)))
                 (princ "\n       ")
                 (pp-sexp (cons type data))
                 (when backtrace
                   (print! (bold "Backtrace:"))
                   (print-group!
                    (dolist (frame (seq-take backtrace 10))
                      (print!
                       "%0.74s" (replace-regexp-in-string
                                 "[\n\r]" "\\\\n"
                                 (format "%S" frame))))))
                 (princ "\n")))))))
      ;; C-d causes an end-of-file error
      (end-of-file (princ "exit\n") (kill-emacs 0)))
    (unless accumulated-input (princ "\n"))))

2.4.7. Htmlize command

Why not have a command to htmlize files? This is basically a little test of my engrave-faces package because it somehow seems to work without a GUI, while the htmlize package doesn’t.

Emacs Lisp
#
(defcli! htmlize (file)
  "Export a FILE buffer to HTML."

  (print! "Htmlizing %s" file)

  (doom-initialize)
  (require 'highlight-numbers)
  (require 'highlight-quoted)
  (require 'rainbow-delimiters)
  (require 'engrave-faces-html)

  ;; Lighten org-mode
  (when (string= "org" (file-name-extension file))
    (setcdr (assoc 'org after-load-alist) nil)
    (setq org-load-hook nil)
    (require 'org)
    (setq org-mode-hook nil)
    (add-hook 'engrave-faces-before-hook
              (lambda () (if (eq major-mode 'org-mode)
                        (org-show-all)))))

  (engrave-faces-html-file file))

2.4.8. Org buffer creation

Let’s make creating an Org buffer just that little bit easier.

Emacs Lisp
#
(evil-define-command +evil-buffer-org-new (count file)
  "Creates a new ORG buffer replacing the current window, optionally
   editing a certain FILE"
  :repeat nil
  (interactive "P<f>")
  (if file
      (evil-edit file)
    (let ((buffer (generate-new-buffer "*new org*")))
      (set-window-buffer nil buffer)
      (with-current-buffer buffer
        (org-mode)
        (setq-local doom-real-buffer-p t)))))

(map! :leader
      (:prefix "b"
       :desc "New empty Org buffer" "o" #'+evil-buffer-org-new))

2.4.9. Dashboard

2.4.9.1. A fancy splash screen

Emacs can render an image as the splash screen, but I think we can do better than just a completely static image. Since, SVG images in particular are supported, we can use them as the basis for a fancier splash screen image setup — with themable, resizing images.

With the effort I’m putting into this, it would be nice to have a good image, and @MarioRicalde came up with a cracker! He’s also provided me with a nice Emacs-style E. I was using the blackhole image, but when I stripped down the splash screen to something more minimal I switched to just using the E.

Fancy Emacs "E"
Emacs Lisp
#
(defvar fancy-splash-image-directory
  (expand-file-name "misc/splash-images/" doom-private-dir)
  "Directory in which to look for splash image templates.")

(defvar fancy-splash-image-template
  (expand-file-name "emacs-e-template.svg" fancy-splash-image-directory)
  "Default template svg used for the splash image.
Colours are substituted as per `fancy-splash-template-colours'.")

Special named colours can be used as the basis for theming, with a simple replacement system.

Emacs Lisp
#
(defvar fancy-splash-template-colours
  '(("#111112" :face default   :attr :foreground)
    ("#8b8c8d" :face shadow)
    ("#eeeeef" :face default   :attr :background)
    ("#e66100" :face highlight :attr :background)
    ("#1c71d8" :face font-lock-keyword-face)
    ("#f5c211" :face font-lock-type-face)
    ("#813d9c" :face font-lock-constant-face)
    ("#865e3c" :face font-lock-function-name-face)
    ("#2ec27e" :face font-lock-string-face)
    ("#c01c28" :face error)
    ("#000001" :face ansi-color-black)
    ("#ff0000" :face ansi-color-red)
    ("#ff00ff" :face ansi-color-magenta)
    ("#00ff00" :face ansi-color-green)
    ("#ffff00" :face ansi-color-yellow)
    ("#0000ff" :face ansi-color-blue)
    ("#00ffff" :face ansi-color-cyan)
    ("#fffffe" :face ansi-color-white))
  "Alist of colour-replacement plists.
Each plist is of the form (\"$placeholder\" :doom-color 'key :face 'face).
If the current theme is a doom theme :doom-color will be used,
otherwise the colour will be face foreground.")

If we want to make sure an image is themed, we can look for unrecognised hex strings that are not greyscale (as greyscale can be expected in the form of a transparent overlay).

Emacs Lisp
#
(defun fancy-splash-check-buffer ()
  "Check the current SVG buffer for bad colours."
  (interactive)
  (when (eq major-mode 'image-mode)
    (xml-mode))
  (when (and (featurep 'rainbow-mode)
             (not (bound-and-true-p rainbow-mode)))
    (rainbow-mode 1))
  (let* ((colours (mapcar #'car fancy-splash-template-colours))
         (colourise-hex
          (lambda (hex)
            (propertize
             hex
             'face `((:foreground
                      ,(if (< 0.5
                              (cl-destructuring-bind (r g b) (x-color-values hex)
                                ;; Values taken from `rainbow-color-luminance'
                                (/ (+ (* .2126 r) (* .7152 g) (* .0722 b))
                                   (* 256 255 1.0))))
                           "white" "black")
                      (:background ,hex))))))
         (cn 96)
         (colour-menu-entries
          (mapcar
           (lambda (colour)
             (cl-incf cn)
             (cons cn
                   (cons
                    (substring-no-properties colour)
                    (format " (%s) %s %s"
                            (propertize (char-to-string cn)
                                        'face 'font-lock-keyword-face)
                            (funcall colourise-hex colour)
                            (propertize
                             (symbol-name
                              (plist-get
                               (cdr (assoc colour fancy-splash-template-colours))
                               :face))
                             'face 'shadow)))))
           colours))
         (colour-menu-template
          (format
           "Colour %%s is unexpected! Should this be one of the following?\n
%s
 %s to ignore
 %s to quit"
           (mapconcat
            #'cddr
            colour-menu-entries
            "\n")
           (propertize "SPC" 'face 'font-lock-keyword-face)
           (propertize "ESC" 'face 'font-lock-keyword-face)))
         (colour-menu-choice-keys
          (append (mapcar #'car colour-menu-entries)
                  (list ?\s)))
         (buf (get-buffer-create "*fancy-splash-lint-colours-popup*"))
         (good-colour-p
          (lambda (colour)
            (or (assoc colour fancy-splash-template-colours)
                ;; Check if greyscale
                (or (and (= (length colour) 4)
                         (= (aref colour 1)   ; r
                            (aref colour 2)   ; g
                            (aref colour 3))) ; b
                    (and (= (length colour) 7)
                         (string= (substring colour 1 3)       ; rr =
                                  (substring colour 3 5))      ; gg
                         (string= (substring colour 3 5)       ; gg =
                                  (substring colour 5 7))))))) ; bb
         (prompt-to-replace
          (lambda (target)
            (with-current-buffer buf
              (erase-buffer)
              (insert (format colour-menu-template
                              (funcall colourise-hex target)))
              (setq-local cursor-type nil)
              (set-buffer-modified-p nil)
              (goto-char (point-min)))
            (save-window-excursion
              (pop-to-buffer buf)
              (fit-window-to-buffer (get-buffer-window buf))
              (car (alist-get
                    (read-char-choice
                     (format "Select replacement, %s-%s or SPC: "
                             (char-to-string (caar colour-menu-entries))
                             (char-to-string (caar (last colour-menu-entries))))
                     colour-menu-choice-keys)
                    colour-menu-entries))))))
    (save-excursion
      (goto-char (point-min))
      (while (re-search-forward "#[0-9A-Fa-f]\\{6\\}\\|#[0-9A-Fa-f]\\{3\\}" nil t)
        (recenter)
        (let* ((colour (match-string 0))
               (replacement (and (not (funcall good-colour-p colour))
                                 (funcall prompt-to-replace colour))))
          (when replacement
            (replace-match replacement t t))))
      (message "Done"))))

To make it easier to produce themable images, we can also provide an Inkscape colour palette.

text
#
GIMP Palette
Name: Emacs Fancy Splash Template
#
 17  17  18 #111112 Foreground
139 140 141 #8b8c8d Shadow
238 238 239 #eeeeef Background
230  97   0 #e66100 Colour 1 (Highlight)
 28 113 216 #1c71d8 Colour 2 (Keyword)
245 194  17 #f5c211 Colour 3 (Type)
129  61 156 #813d9c Colour 4 (Constant)
134  94  60 #865e3c Colour 5 (Function)
 46 194 126 #2ec27e Colour 6 (String)
192  28  40 #c01c28 Colour 7 (Error)
  0   0   1 #000001 Black
255   0   0 #ff0000 Red
255   0 255 #ff00ff Magenta
  0 255   0 #00ff00 Green
255 255   0 #ffff00 Yellow
  0   0 255 #0000ff Blue
  0 255 255 #00ffff Cyan
255 255 254 #fffffe White

Since we’re going to be generating theme-specific versions of splash images, it would be good to have a cache directory.

Emacs Lisp
#
(defvar fancy-splash-cache-dir (expand-file-name "theme-splashes/" doom-cache-dir))

To set up dynamic resizing, we’ll use a list specifying the image height at various frame-height thresholds, with a few extra bells and whistles (such as the ability to change image too).

Emacs Lisp
#
(defvar fancy-splash-sizes
  `((:height 300 :min-height 50 :padding (0 . 2))
    (:height 250 :min-height 42 :padding (2 . 4))
    (:height 200 :min-height 35 :padding (3 . 3))
    (:height 150 :min-height 28 :padding (3 . 3))
    (:height 100 :min-height 20 :padding (2 . 2))
    (:height 75  :min-height 15 :padding (2 . 1))
    (:height 50  :min-height 10 :padding (1 . 0))
    (:height 1   :min-height 0  :padding (0 . 0)))
  "List of plists specifying image sizing states.
Each plist should have the following properties:
- :height, the height of the image
- :min-height, the minimum `frame-height' for image
- :padding, a `+doom-dashboard-banner-padding' (top . bottom) padding
  specification to apply
Optionally, each plist may set the following two properties:
- :template, a non-default template file
- :file, a file to use instead of template")

Now that’s we’ve set up the customisation approach, we need to work out the mechanics for actually implementing this. To start with, a basic utility function to get the relevant file path.

Emacs Lisp
#
(defun fancy-splash-filename (theme template height)
  "Get the file name for the splash image with THEME and of HEIGHT."
  (expand-file-name (format "%s-%s-%d.svg" theme (file-name-base template) height) fancy-splash-cache-dir))

Now to go about actually generating the images. To adjust the sizing on demand, we will offer two mechanisms:

  1. A special $height token which is replaced with the desired height
  2. Recognition of height=100, in which case 100 will be replaced with the desired height and any width property will be removed.
Emacs Lisp
#
(defun fancy-splash-generate-image (template height)
  "Create a themed image from TEMPLATE of HEIGHT.
The theming is performed using `fancy-splash-template-colours'
and the current theme."
  (with-temp-buffer
    (insert-file-contents template)
    (goto-char (point-min))
    (if (re-search-forward "$height" nil t)
        (replace-match (number-to-string height) t t)
      (if (re-search-forward "height=\"100\\(?:\\.0[0-9]*\\)?\"" nil t)
          (progn
            (replace-match (format "height=\"%s\"" height) t t)
            (goto-char (point-min))
            (when (re-search-forward "\\([ \t\n]\\)width=\"[\\.0-9]+\"[ \t\n]*" nil t)
              (replace-match "\\1")))
        (warn "Warning! fancy splash template: neither $height nor height=100 not found in %s" template)))
    (dolist (substitution fancy-splash-template-colours)
      (goto-char (point-min))
      (let* ((replacement-colour
              (face-attribute (plist-get (cdr substitution) :face)
                              (or (plist-get (cdr substitution) :attr) :foreground)
                              nil 'default))
             (replacement-hex
              (if (string-prefix-p "#" replacement-colour)
                  replacement-colour
                (apply 'format "#%02x%02x%02x"
                       (mapcar (lambda (c) (ash c -8))
                               (color-values replacement-colour))))))
        (while (search-forward (car substitution) nil t)
          (replace-match replacement-hex nil nil))))
    (unless (file-exists-p fancy-splash-cache-dir)
      (make-directory fancy-splash-cache-dir t))
    (let ((inhibit-message t))
      (write-region nil nil (fancy-splash-filename (car custom-enabled-themes) template height)))))

We may as well generate each theme’s appropriate images in bunk.

Emacs Lisp
#
(defun fancy-splash-generate-all-images ()
  "Perform `fancy-splash-generate-image' in bulk."
  (dolist (size fancy-splash-sizes)
    (unless (plist-get size :file)
      (fancy-splash-generate-image
       (or (plist-get size :template)
           fancy-splash-image-template)
       (plist-get size :height)))))

It would be nice to have a simple check function which will just generate the set of relevant images if needed, and do nothing if they already exist.

Emacs Lisp
#
(defun fancy-splash-ensure-theme-images-exist (&optional height)
  "Ensure that the relevant images exist.
Use the image of HEIGHT to check, defaulting to the height of the first
specification in `fancy-splash-sizes'. If that file does not exist for
the current theme, `fancy-splash-generate-all-images' is called. "
  (unless (file-exists-p
           (fancy-splash-filename
            (car custom-enabled-themes)
            fancy-splash-image-template
            (or height (plist-get (car fancy-splash-sizes) :height))))
    (fancy-splash-generate-all-images)))

In case we switch out the images used (or something else goes wrong), it would be good to have a convenient method to clear this cache.

Emacs Lisp
#
(defun fancy-splash-clear-cache (&optional delete-files)
  "Clear all cached fancy splash images.
Optionally delete all cache files and regenerate the currently relevant set."
  (interactive (list t))
  (dolist (size fancy-splash-sizes)
    (unless (plist-get size :file)
      (let ((image-file
             (fancy-splash-filename
              (car custom-enabled-themes)
              (or (plist-get size :template)
                  fancy-splash-image-template)
              (plist-get size :height))))
        (image-flush (create-image image-file) t))))
  (message "Fancy splash image cache cleared!")
  (when delete-files
    (delete-directory fancy-splash-cache-dir t)
    (fancy-splash-generate-all-images)
    (message "Fancy splash images cache deleted!")))

In a similar way, it could be fun to allow for switching the template used. We can support this by looking for files ending in -template.svg and running image-flush via fancy-splash-clear-cache.

Emacs Lisp
#
(defun fancy-splash-switch-template ()
  "Switch the template used for the fancy splash image."
  (interactive)
  (let ((new (completing-read
              "Splash template: "
              (mapcar
               (lambda (template)
                 (replace-regexp-in-string "-template\\.svg$" "" template))
               (directory-files fancy-splash-image-directory nil "-template\\.svg\\'"))
              nil t)))
    (setq fancy-splash-image-template
          (expand-file-name (concat new "-template.svg") fancy-splash-image-directory))
    (fancy-splash-clear-cache)
    (message "") ; Clear message from `fancy-splash-clear-cache'.
    (setq fancy-splash--last-size nil)
    (fancy-splash-apply-appropriate-image)))

Now we can ensure that the desired images exist, we need to work out which particular one we want. This is really just a matter of comparing the frame height to the set of presets.

Emacs Lisp
#
(defun fancy-splash-get-appropriate-size ()
  "Find the firt `fancy-splash-sizes' with min-height of at least frame height."
  (let ((height (frame-height)))
    (cl-some (lambda (size) (when (>= height (plist-get size :min-height)) size))
             fancy-splash-sizes)))

We now want to apply the appropriate image to the dashboard. At the same time, we don’t want to do so needlessly, so we may as well record the size and theme to determine when a refresh is actually needed.

Emacs Lisp
#
(setq fancy-splash--last-size nil)
(setq fancy-splash--last-theme nil)

(defun fancy-splash-apply-appropriate-image (&rest _)
  "Ensure the appropriate splash image is applied to the dashboard.
This function's signature is \"&rest _\" to allow it to be used
in hooks that call functions with arguments."
  (let ((appropriate-size (fancy-splash-get-appropriate-size)))
    (unless (and (equal appropriate-size fancy-splash--last-size)
                 (equal (car custom-enabled-themes) fancy-splash--last-theme))
      (unless (plist-get appropriate-size :file)
        (fancy-splash-ensure-theme-images-exist (plist-get appropriate-size :height)))
      (setq fancy-splash-image
            (or (plist-get appropriate-size :file)
                (fancy-splash-filename (car custom-enabled-themes)
                                       fancy-splash-image-template
                                       (plist-get appropriate-size :height)))
            +doom-dashboard-banner-padding (plist-get appropriate-size :padding)
            fancy-splash--last-size appropriate-size
            fancy-splash--last-theme (car custom-enabled-themes))
      (+doom-dashboard-reload))))
2.4.9.2. ASCII banner

If we’re operating in a terminal (or emacclient) we see an ascii banner instead of the graphical one. I’d also like to use something simple for this.

Emacs Lisp
#
(defun doom-dashboard-draw-ascii-emacs-banner-fn ()
  (let* ((banner
          '(",---.,-.-.,---.,---.,---."
            "|---'| | |,---||    `---."
            "`---'` ' '`---^`---'`---'"))
         (longest-line (apply #'max (mapcar #'length banner))))
    (put-text-property
     (point)
     (dolist (line banner (point))
       (insert (+doom-dashboard--center
                +doom-dashboard--width
                (concat
                 line (make-string (max 0 (- longest-line (length line)))
                                   32)))
               "\n"))
     'face 'doom-dashboard-banner)))

Now we just need this as Doom’s ASCII banner function.

Emacs Lisp
#
(unless (display-graphic-p) ; for some reason this messes up the graphical splash screen atm
  (setq +doom-dashboard-ascii-banner-fn #'doom-dashboard-draw-ascii-emacs-banner-fn))
2.4.9.3. Splash phrases

Having an aesthetically pleasing image is all very well and good, but I’m aiming for minimal, not clinical — it would be good to inject some fun into the dashboard. After trawling around the internet for a bit, I’ve found three sources of fun phrases, namely:

  • a nonsense corporate jargon generator,
  • a selection of random developer excuses, and
  • a collection of fun but rather useless facts.

I used to have a fancy method that used web APIs for these and inserted an invisible placeholder into the dashboard which was asynchronously replaced on the result of (debounced) requests to the APIs. While that actually worked quite well, I realised that it would be much better and simpler if I simply copied the phrases sources to local files and did the random selection / generation in elisp.

Let’s start off by setting the local folder to put the phrase source files in.

Emacs Lisp
#
(defvar splash-phrase-source-folder
  (expand-file-name "misc/splash-phrases" doom-private-dir)
  "A folder of text files with a fun phrase on each line.")

Now we want to support two “phrase systems”

  1. A complete file of phrases, one phrase per line
  2. A collection of phrase-components, put together to form a phrase

It would be good to specify/detect which of the two cases apply based on the file name alone. I’ve done this by setting the simple check that if the file name contains -N- (where N is some number) then it is taken as the Nth phrase component, with everything preceding the -N- token taken as the collection identifier, and everything after -N- ignored.

Emacs Lisp
#
(defvar splash-phrase-sources
  (let* ((files (directory-files splash-phrase-source-folder nil "\\.txt\\'"))
         (sets (delete-dups (mapcar
                             (lambda (file)
                               (replace-regexp-in-string "\\(?:-[0-9]+-\\w+\\)?\\.txt" "" file))
                             files))))
    (mapcar (lambda (sset)
              (cons sset
                    (delq nil (mapcar
                               (lambda (file)
                                 (when (string-match-p (regexp-quote sset) file)
                                   file))
                               files))))
            sets))
  "A list of cons giving the phrase set name, and a list of files which contain phrase components.")

Let’s fix the phrase set in use, and pick a random phrase source on startup.

Emacs Lisp
#
(defvar splash-phrase-set
  (nth (random (length splash-phrase-sources)) (mapcar #'car splash-phrase-sources))
  "The default phrase set. See `splash-phrase-sources'.")

While having a random set of phrases is fantastic the vast majority of the time, I expect that occasionally I’ll feel in the mood to change the phrase set or pick a particular one, so some functions for that would be nice.

Emacs Lisp
#
(defun splash-phrase-set-random-set ()
  "Set a new random splash phrase set."
  (interactive)
  (setq splash-phrase-set
        (nth (random (1- (length splash-phrase-sources)))
             (cl-set-difference (mapcar #'car splash-phrase-sources) (list splash-phrase-set))))
  (+doom-dashboard-reload t))

(defun splash-phrase-select-set ()
  "Select a specific splash phrase set."
  (interactive)
  (setq splash-phrase-set (completing-read "Phrase set: " (mapcar #'car splash-phrase-sources)))
  (+doom-dashboard-reload t))

If we’re going to be selecting phrases from a large list of lines, it could be worth caching the list of lines.

Emacs Lisp
#
(defvar splash-phrase--cached-lines nil)

Now let’s write a function that will pick a random line from a file, using splash-phrase--cached-lines if possible.

Emacs Lisp
#
(defun splash-phrase-get-from-file (file)
  "Fetch a random line from FILE."
  (let ((lines (or (cdr (assoc file splash-phrase--cached-lines))
                   (cdar (push (cons file
                                     (with-temp-buffer
                                       (insert-file-contents (expand-file-name file splash-phrase-source-folder))
                                       (split-string (string-trim (buffer-string)) "\n")))
                               splash-phrase--cached-lines)))))
    (nth (random (length lines)) lines)))

With this, we now have enough to generate random phrases on demand.

Emacs Lisp
#
(defun splash-phrase (&optional set)
  "Construct a splash phrase from SET. See `splash-phrase-sources'."
  (mapconcat
   #'splash-phrase-get-from-file
   (cdr (assoc (or set splash-phrase-set) splash-phrase-sources))
   " "))

I originally thought this might be enough, but some phrases are a tad long, and this isn’t exactly doom-dashboard appropriate. In such cases we need to split lines, re-centre them, and add some whitespace. While we’re at it, we may as well make it that you can click on the phrase to replace it with new one.

Emacs Lisp
#
(defun splash-phrase-dashboard-formatted ()
  "Get a splash phrase, flow it over multiple lines as needed, and fontify it."
  (mapconcat
   (lambda (line)
     (+doom-dashboard--center
      +doom-dashboard--width
      (with-temp-buffer
        (insert-text-button
         line
         'action
         (lambda (_) (+doom-dashboard-reload t))
         'face 'doom-dashboard-menu-title
         'mouse-face 'doom-dashboard-menu-title
         'help-echo "Random phrase"
         'follow-link t)
        (buffer-string))))
   (split-string
    (with-temp-buffer
      (insert (splash-phrase))
      (setq fill-column (min 70 (/ (* 2 (window-width)) 3)))
      (fill-region (point-min) (point-max))
      (buffer-string))
    "\n")
   "\n"))

Almost there now, this just needs some centreing and newlines.

Emacs Lisp
#
(defun splash-phrase-dashboard-insert ()
  "Insert the splash phrase surrounded by newlines."
  (insert "\n" (splash-phrase-dashboard-formatted) "\n"))
2.4.9.4. Quick actions

When using the dashboard, there are often a small number of actions I will take. As the dashboard is it’s own major mode, there is no need to suffer the tyranny of unnecessary keystrokes — we can simply bind common actions to a single key!

Emacs Lisp
#
(defun +doom-dashboard-setup-modified-keymap ()
  (setq +doom-dashboard-mode-map (make-sparse-keymap))
  (map! :map +doom-dashboard-mode-map
        :desc "Find file" :ng "f" #'find-file
        :desc "Recent files" :ng "r" #'consult-recent-file
        :desc "Config dir" :ng "C" #'doom/open-private-config
        :desc "Open config.org" :ng "c" (cmd! (find-file (expand-file-name "config.org" doom-user-dir)))
        :desc "Open org-mode root" :ng "O" (cmd! (find-file (expand-file-name "lisp/org/" doom-user-dir)))
        :desc "Open dotfile" :ng "." (cmd! (doom-project-find-file "~/.config/"))
        :desc "Notes (roam)" :ng "n" #'org-roam-node-find
        :desc "Switch buffer" :ng "b" #'+vertico/switch-workspace-buffer
        :desc "Switch buffers (all)" :ng "B" #'consult-buffer
        :desc "IBuffer" :ng "i" #'ibuffer
        :desc "Previous buffer" :ng "p" #'previous-buffer
        :desc "Set theme" :ng "t" #'consult-theme
        :desc "Quit" :ng "Q" #'save-buffers-kill-terminal
        :desc "Show keybindings" :ng "h" (cmd! (which-key-show-keymap '+doom-dashboard-mode-map))))

(add-transient-hook! #'+doom-dashboard-mode (+doom-dashboard-setup-modified-keymap))
(add-transient-hook! #'+doom-dashboard-mode :append (+doom-dashboard-setup-modified-keymap))
(add-hook! 'doom-init-ui-hook :append (+doom-dashboard-setup-modified-keymap))

Unfortunately the show keybindings help doesn’t currently work as intended, but this is still quite nice overall.

Now that the dashboard is so convenient, I’ll want to make it easier to get to.

Emacs Lisp
#
(map! :leader :desc "Dashboard" "d" #'+doom-dashboard/open)
2.4.9.5. Putting it all together

With the splash image and phrase generation worked out, we can almost put together the desired dashboard from scratch, we just need to re-create the benchmark information by itself.

Emacs Lisp
#
(defun +doom-dashboard-benchmark-line ()
  "Insert the load time line."
  (when doom-init-time
    (insert
     "\n\n"
     (propertize
      (+doom-dashboard--center
       +doom-dashboard--width
       (doom-display-benchmark-h 'return))
      'face 'doom-dashboard-loaded))))

With doom-display-benchmark-h displayed here, I don’t see the need for it to be shown in the minibuffer as well.

Emacs Lisp
#
(remove-hook 'doom-after-init-hook #'doom-display-benchmark-h)

Now we can create the desired dashboard by setting +doom-dashboard-functions to just have:

  • The “widget banner” (splash image)
  • The benchmark line
  • A random phrase

This gets rid of two segments I’m not particularly interested in seeing

  • The shortmenu
  • The footer (github link)
Emacs Lisp
#
(setq +doom-dashboard-functions
      (list #'doom-dashboard-widget-banner
            #'+doom-dashboard-benchmark-line
            #'splash-phrase-dashboard-insert))

At this point there are just a few minor tweaks I’d still like to make to the dashboard.

Emacs Lisp
#
(defun +doom-dashboard-tweak (&optional _)
  (with-current-buffer (get-buffer +doom-dashboard-name)
    (setq-local line-spacing 0.2
                mode-line-format nil
                evil-normal-state-cursor (list nil))))

Now we can just add this as a mode hook.

Emacs Lisp
#
(add-hook '+doom-dashboard-mode-hook #'+doom-dashboard-tweak)

Unfortunately, the initialisation of doom-modeline interferes with the set mode-line-format value. To get around this, we can re-apply +doom-dashboard-tweak as a slightly late init hook, after doom-modeline has been loaded.

Emacs Lisp
#
(add-hook 'doom-after-init-hook #'+doom-dashboard-tweak 1)

Lastly, with the buffer name being shown in the frame title thanks to some other configuration, we might as well display something a bit prettier than *doom*.

Emacs Lisp
#
(setq +doom-dashboard-name "► Doom"
      doom-fallback-buffer-name +doom-dashboard-name)

The end result is a minimal but rather nice splash screen.

The splash screen, just loaded.

To keep the splash image up to date, we just need to check it every time the frame size or theme is changed.

Emacs Lisp
#
(add-hook 'window-size-change-functions #'fancy-splash-apply-appropriate-image)
(add-hook 'doom-load-theme-hook #'fancy-splash-apply-appropriate-image)

2.5. Other things

2.5.1. Editor interaction

2.5.1.1. Mouse buttons
Emacs Lisp
#
(map! :n [mouse-8] #'better-jumper-jump-backward
      :n [mouse-9] #'better-jumper-jump-forward)

2.5.2. Window title

I’d like to have just the buffer name, then if applicable the project folder

Emacs Lisp
#
(setq frame-title-format
      '(""
        (:eval
         (if (string-match-p (regexp-quote (or (bound-and-true-p org-roam-directory) "\u0000"))
                             (or buffer-file-name ""))
             (replace-regexp-in-string
              ".*/[0-9]*-?" "☰ "
              (subst-char-in-string ?_ ?\s buffer-file-name))
           "%b"))
        (:eval
         (when-let ((project-name (and (featurep 'projectile) (projectile-project-name))))
           (unless (string= "-" project-name)
             (format (if (buffer-modified-p)  " ◉ %s" "  ●  %s") project-name))))))

For example when I open my config file it the window will be titled config.org ● doom then as soon as I make a change it will become config.org ◉ doom.

2.5.3. Systemd daemon

For running a systemd service for a Emacs server I have the following. zsh -c is used to ensure that .zshenv is loaded.

emacsclient servicesystemd
#
[Unit]
Description=Emacs server daemon
Documentation=info:emacs man:emacs(1) https://gnu.org/software/emacs/

[Service]
Type=forking
ExecStart=zsh -c 'emacs --daemon && emacsclient -c --eval "(delete-frame)"'
ExecStop=/usr/bin/emacsclient --no-wait --eval "(progn (setq kill-emacs-hook nil) (kill emacs))"
Environment=COLORTERM=truecolor
Restart=on-failure

[Install]
WantedBy=default.target

which is then enabled by

Shell Script
#
systemctl --user enable emacs.service

For some reason if a frame isn’t opened early in the initialisation process, the daemon doesn’t seem to like opening frames later — hence the && emacsclient part of the ExecStart value.

It can now be nice to use this as a ’default app’ for opening files. If we add an appropriate desktop entry, and enable it in the desktop environment.

Configuration File
#
[Desktop Entry]
Name=Emacs client
GenericName=Text Editor
Comment=A flexible platform for end-user applications
MimeType=text/english;text/plain;text/x-makefile;text/x-c++hdr;text/x-c++src;text/x-chdr;text/x-csrc;text/x-java;text/x-moc;text/x-pascal;text/x-tcl;text/x-tex;application/x-shellscript;text/x-c;text/x-c++;
Exec=emacsclient -create-frame --alternate-editor="" --no-wait %F
Icon=emacs
Type=Application
Terminal=false
Categories=TextEditor;Utility;
StartupWMClass=Emacs
Keywords=Text;Editor;
X-KDE-StartupNotify=false

When the daemon is running, I almost always want to do a few particular things with it, so I may as well eat the load time at startup. We also want to keep mu4e running.

It would be good to start the IRC client (circe) too, but that seems to have issues when started in a non-graphical session.

Lastly, while I’m not sure quite why it happens, but after a bit it seems that new Emacsclient frames start on the *scratch* buffer instead of the dashboard. I prefer the dashboard, so let’s ensure that’s always switched to in new frames.

daemon initialisationEmacs Lisp
#
(defun greedily-do-daemon-setup ()
  (require 'org)
  (when (require 'mu4e nil t)
    (setq mu4e-confirm-quit t)
    (setq +mu4e-lock-greedy t)
    (setq +mu4e-lock-relaxed t)
    (when (+mu4e-lock-available t)
      (mu4e--start)))
  (when (require 'elfeed nil t)
    (run-at-time nil (* 8 60 60) #'elfeed-update)))

(when (daemonp)
  (add-hook 'emacs-startup-hook #'greedily-do-daemon-setup)
  (add-hook! 'server-after-make-frame-hook
    (unless (string-match-p "\\*draft\\|\\*stdin\\|emacs-everywhere" (buffer-name))
      (switch-to-buffer +doom-dashboard-name))))

2.5.4. Emacs client wrapper

I frequently want to make use of Emacs while in a terminal emulator. To make this easier, I can construct a few handy aliases.

However, a little convenience script in ~/.local/bin can have the same effect, be available beyond the specific shell I plop the alias in, then also allow me to add a few bells and whistles — namely:

  • Accepting stdin by putting it in a temporary file and immediately opening it.
  • Guessing that the tty is a good idea when $DISPLAY is unset (relevant with SSH sessions, among other things).
  • With a whiff of 24-bit color support, sets TERM variable to a terminfo that (probably) announces 24-bit color support.
  • Changes GUI emacsclient instances to be non-blocking by default (--no-wait), and instead take a flag to suppress this behaviour (-w).

I would use sh, but using arrays for argument manipulation is just too convenient, so I’ll raise the requirement to bash. Since arrays are the only ’extra’ compared to sh, other shells like ksh etc. should work too.

eShell Script
#
#!/usr/bin/env bash
force_tty=false
force_wait=false
stdin_mode=""

args=()

while :; do
    case "$1" in
        -t | -nw | --tty)
            force_tty=true
            shift ;;
        -w | --wait)
            force_wait=true
            shift ;;
        -m | --mode)
            stdin_mode=" ($2-mode)"
            shift 2 ;;
        -h | --help)
            echo -e "\033[1mUsage: e [-t] [-m MODE] [OPTIONS] FILE [-]\033[0m

Emacs client convenience wrapper.

\033[1mOptions:\033[0m
\033[0;34m-h, --help\033[0m            Show this message
\033[0;34m-t, -nw, --tty\033[0m        Force terminal mode
\033[0;34m-w, --wait\033[0m            Don't supply \033[0;34m--no-wait\033[0m to graphical emacsclient
\033[0;34m-\033[0m                     Take \033[0;33mstdin\033[0m (when last argument)
\033[0;34m-m MODE, --mode MODE\033[0m  Mode to open \033[0;33mstdin\033[0m with

Run \033[0;32memacsclient --help\033[0m to see help for the emacsclient."
            exit 0 ;;
        --*=*)
            set -- "$@" "${1%%=*}" "${1#*=}"
            shift ;;
        *)
            if [ "$#" = 0 ]; then
                break; fi
            args+=("$1")
            shift ;;
    esac
done

if [ ! "${#args[*]}" = 0 ] && [ "${args[-1]}" = "-" ]; then
    unset 'args[-1]'
    TMP="$(mktemp /tmp/emacsstdin-XXX)"
    cat > "$TMP"
    args+=(--eval "(let ((b (generate-new-buffer \"*stdin*\"))) (switch-to-buffer b) (insert-file-contents \"$TMP\") (delete-file \"$TMP\")${stdin_mode})")
fi

if [ -z "$DISPLAY" ] || $force_tty; then
    # detect terminals with sneaky 24-bit support
    if { [ "$COLORTERM" = truecolor ] || [ "$COLORTERM" = 24bit ]; } \
        && [ "$(tput colors 2>/dev/null)" -lt 257 ]; then
        if echo "$TERM" | grep -q "^\w\+-[0-9]"; then
            termstub="${TERM%%-*}"; else
            termstub="${TERM#*-}"; fi
        if infocmp "$termstub-direct" >/dev/null 2>&1; then
            TERM="$termstub-direct"; else
            TERM="xterm-direct"; fi # should be fairly safe
    fi
    emacsclient --tty -create-frame --alternate-editor="$ALTERNATE_EDITOR" "${args[@]}"
else
    if ! $force_wait; then
        args+=(--no-wait); fi
    emacsclient -create-frame --alternate-editor="$ALTERNATE_EDITOR" "${args[@]}"
fi

Now, to set an alias to use e with magit, and then for maximum laziness we can set aliases for the terminal-forced variants.

Shell Script
#
alias m='e --eval "(progn (magit-status) (delete-other-windows))"'
alias mt="m -t"
alias et="e -t"

2.5.5. Prompt to run setup script

At various points in this config, content is conditionally tangled to ./setup.sh. It’s no good just putting content there if it isn’t run though. To help remind me to run it when needed, let’s add a little prompt when there’s anything to be run.

run-setupEmacs Lisp
#
(if (file-exists-p "setup.sh")
    (if (string-empty-p (string-trim (with-temp-buffer (insert-file-contents "setup.sh") (buffer-string)) "#!/usr/bin/env bash"))
        (message ";; Setup script is empty")
      (message ";; Detected content in the setup script")
      (pp-to-string
       `(unless noninteractive
          (defun +config-run-setup ()
            (when (yes-or-no-p (format "%s The setup script has content. Check and run the script?"
                                       (propertize "Warning!" 'face '(bold warning))))
              (find-file (expand-file-name "setup.sh" doom-private-dir))
              (when (yes-or-no-p "Would you like to run this script?")
                (async-shell-command "./setup.sh"))))
          (add-hook! 'doom-init-ui-hook
            (run-at-time nil nil #'+config-run-setup)))))
  (message ";; setup.sh did not exist during tangle. Tangle again.")
  (pp-to-string
   `(unless noninteractive
      (add-hook! 'doom-init-ui-hook #'+literate-tangle-async-h))))
Emacs Lisp
#
<<run-setup()>>

2.5.6. Grabbing source block content as a string

In a few places in this configuration, it is desirable to grab a source block’s content as a string. We can use a noweb <<replacement>> form, however that doesn’t work with string escaping.

We can get around this by using noweb execution and write an name (unexported) babel block that will grab the content of another named source block as a string. Note that this does not currently expand nested noweb references.

grabEmacs Lisp
#
(if-let ((block-pos (org-babel-find-named-block name))
         (block (org-element-at-point block-pos)))
    (format "%S" (string-trim (org-element-property :value block)))
  ;; look for :noweb-ref matches
  (let (block-contents)
    (org-element-cache-map
     (lambda (src)
       (when (and (not (org-in-commented-heading-p nil src))
                  (not (org-in-archived-heading-p nil src))
                  (let* ((lang (org-element-property :language src))
                         (params
                          (apply
                           #'org-babel-merge-params
                           (append
                            (org-with-point-at (org-element-property :begin src)
                              (org-babel-params-from-properties lang t))
                            (mapcar
                             (lambda (h)
                               (org-babel-parse-header-arguments h t))
                             (cons (org-element-property :parameters src)
                                   (org-element-property :header src))))))
                         (ref (alist-get :noweb-ref params)))
                    (equal ref name)))
         (push (org-babel--normalize-body src)
               block-contents)))
     :granularity 'element
     :restrict-elements '(src-block))
    (and block-contents
         (format "%S"
                 (mapconcat
                  #'identity
                  (nreverse block-contents)
                  "\n\n")))))

There we go, that’s all it takes! This can be used via the form <<grab("block-name")>>.

3. Packages

3.1. Loading instructions

This is where you install packages, by declaring them with the package! macro in packages.el, then running doom refresh on the command line. This file shouldn’t be byte compiled.

Emacs Lisp
#
;; -*- no-byte-compile: t; -*-

You’ll then need to restart Emacs for your changes to take effect! Or at least, run M-x doom/reload.

Warning: Don’t disable core packages listed in ~/.config/emacs/core/packages.el. Doom requires these, and disabling them may have terrible side effects.

3.1.1. Packages in MELPA/ELPA/emacsmirror

To install some-package from MELPA, ELPA or emacsmirror:

Emacs Lisp
#
(package! some-package)

3.1.2. Packages from git repositories

To install a package directly from a particular repo, you’ll need to specify a :recipe. You’ll find documentation on what :recipe accepts here:

Emacs Lisp
#
(package! another-package
  :recipe (:host github :repo "username/repo"))

If the package you are trying to install does not contain a PACKAGENAME.el file, or is located in a subdirectory of the repo, you’ll need to specify :files in the :recipe:

Emacs Lisp
#
(package! this-package
  :recipe (:host github :repo "username/repo"
           :files ("some-file.el" "src/lisp/*.el")))

3.1.3. Disabling built-in packages

If you’d like to disable a package included with Doom, for whatever reason, you can do so here with the :disable property:

Emacs Lisp
#
(package! builtin-package :disable t)

You can override the recipe of a built in package without having to specify all the properties for :recipe. These will inherit the rest of its recipe from Doom or MELPA/ELPA/Emacsmirror:

Emacs Lisp
#
(package! builtin-package :recipe (:nonrecursive t))
(package! builtin-package-2 :recipe (:repo "myfork/package"))

Specify a :branch to install a package from a particular branch or tag.

Emacs Lisp
#
(package! builtin-package :recipe (:branch "develop"))

3.2. Convenience

3.2.1. Avy

From the :config default module.

What a wonderful way to jump to buffer positions, and it uses the QWERTY home-row for jumping. Very convenient … except I’m using Colemak.

avy-colemak-setupEmacs Lisp
#
(after! avy
  ;; home row priorities: 8 6 4 5 - - 1 2 3 7
  (setq avy-keys '(?n ?e ?i ?s ?t ?r ?i ?a)))

Now let’s just have this included when an ErgoDox is found via dmesg.

avy-detect-colemakEmacs Lisp
#
(if (= 0 (call-process "sh" nil nil nil "-c" "dmesg | grep -q 'ErgoDox'"))
    (pp '<<avy-colemak-setup>>)
  ";; Avy: Colemak layout not detected (ErgoDox not mentioned in dmesg).")
Emacs Lisp
#
<<avy-detect-colemak()>>

3.2.2. Rotate (window management)

The rotate package just adds the ability to rotate window layouts, but that sounds nice to me.

Emacs Lisp
#
(package! rotate :pin "4e9ac3ff800880bd9b705794ef0f7c99d72900a6")

3.2.3. Emacs Everywhere

The name says it all. It’s loaded and set up (a bit) by :app everywhere, however as I develop this I want the unpinned version I have as a submodule.

Emacs Lisp
#
(package! emacs-everywhere :recipe (:local-repo "lisp/emacs-everywhere"))
(unpin! emacs-everywhere)

Additionally, I’m going to make some personal choices that aren’t made in the Doom module.

Emacs Lisp
#
(use-package! emacs-everywhere
  :if (daemonp)
  :config
  (require 'spell-fu)
  (setq emacs-everywhere-major-mode-function #'org-mode
        emacs-everywhere-frame-name-format "Edit ∷ %s — %s")
  (defadvice! emacs-everywhere-raise-frame ()
    :after #'emacs-everywhere-set-frame-name
    (setq emacs-everywhere-frame-name (format emacs-everywhere-frame-name-format
                                (emacs-everywhere-app-class emacs-everywhere-current-app)
                                (truncate-string-to-width
                                 (emacs-everywhere-app-title emacs-everywhere-current-app)
                                 45 nil nil "…")))
    ;; need to wait till frame refresh happen before really set
    (run-with-timer 0.1 nil #'emacs-everywhere-raise-frame-1))
  (defun emacs-everywhere-raise-frame-1 ()
    (call-process "wmctrl" nil nil nil "-a" emacs-everywhere-frame-name)))

3.2.4. Which-key

From the :core packages module.

Let’s make this popup a bit faster

Emacs Lisp
#
(setq which-key-idle-delay 0.5) ;; I need the help, I really do

I also think that having evil- appear in so many popups is a bit too verbose, let’s change that, and do a few other similar tweaks while we’re at it.

Emacs Lisp
#
(setq which-key-allow-multiple-replacements t)
(after! which-key
  (pushnew!
   which-key-replacement-alist
   '(("" . "\\`+?evil[-:]?\\(?:a-\\)?\\(.*\\)") . (nil . "◂\\1"))
   '(("\\`g s" . "\\`evilem--?motion-\\(.*\\)") . (nil . "◃\\1"))
   ))
Whichkey triggered on an evil motion

3.3. Tools

3.3.1. Abbrev

Thanks to use a single abbrev-table for multiple modes? - Emacs Stack Exchange I have the following.

Emacs Lisp
#
(add-hook 'doom-first-buffer-hook
          (defun +abbrev-file-name ()
            (setq-default abbrev-mode t)
            (setq abbrev-file-name (expand-file-name "abbrev.el" doom-private-dir))))

3.3.2. Very large files

The very large files mode loads large files in chunks, allowing one to open ridiculously large files.

Emacs Lisp
#
(package! vlf :recipe (:host github :repo "emacs-straight/vlf" :files ("*.el"))
  :pin "cacdb359f8c37c6e7e4c7937462b632d22462130")

To make VLF available without delaying startup, we’ll just load it in quiet moments.

Emacs Lisp
#
(use-package! vlf-setup
  :defer-incrementally vlf-tune vlf-base vlf-write
  vlf-search vlf-occur vlf-follow vlf-ediff vlf
  :commands vlf vlf-mode
  :init
  <<vlf-largefile-prompt>>
  :config
  (advice-remove 'abort-if-file-too-large #'ad-Advice-abort-if-file-too-large)
  <<vlf-linenum-offset>>
  <<vlf-search-chunking>>)

Now, there are one or two tweaks worth applying to VLF. For starters, it goes to the liberty of advising abort-if-file-too-large, and in doing so removes the option of opening files literally. I think that’s a bit much, so we can remove the advice and instead override files--ask-user-about-large-file (the more appropriate function, I think) as a simpler approach, just sacrificing the original behaviour with (setq vlf-application 'always) (which I can’t imagine using anyway).

vlf-largefile-promptEmacs Lisp
#
(defadvice! +files--ask-about-large-file-vlf (size op-type filename offer-raw)
  "Like `files--ask-user-about-large-file', but with support for `vlf'."
  :override #'files--ask-user-about-large-file
  (if (eq vlf-application 'dont-ask)
      (progn (vlf filename) (error ""))
    (let ((prompt (format "File %s is large (%s), really %s?"
                          (file-name-nondirectory filename)
                          (funcall byte-count-to-string-function size) op-type)))
      (if (not offer-raw)
          (if (y-or-n-p prompt) nil 'abort)
        (let ((choice
               (car
                (read-multiple-choice
                 prompt '((?y "yes")
                          (?n "no")
                          (?l "literally")
                          (?v "vlf"))
                 (files--ask-user-about-large-file-help-text
                  op-type (funcall byte-count-to-string-function size))))))
          (cond ((eq choice ?y) nil)
                ((eq choice ?l) 'raw)
                ((eq choice ?v)
                 (vlf filename)
                 (error ""))
                (t 'abort)))))))

As you go from one chunk fetched by VLF to the next, the displayed line number of the first line in each chunk is unchanged. I think it’s reasonable to hope for an overall line number, and by tracking chunk’s cumulative line numbers we can implement this behaviour fairly easily.

vlf-linenum-offsetEmacs Lisp
#
(defvar-local +vlf-cumulative-linenum '((0 . 0))
  "An alist keeping track of the cumulative line number.")

(defun +vlf-update-linum ()
  "Update the line number offset."
  (let ((linenum-offset (alist-get vlf-start-pos +vlf-cumulative-linenum)))
    (setq display-line-numbers-offset (or linenum-offset 0))
    (when (and linenum-offset (not (assq vlf-end-pos +vlf-cumulative-linenum)))
      (push (cons vlf-end-pos (+ linenum-offset
                                 (count-lines (point-min) (point-max))))
            +vlf-cumulative-linenum))))

(add-hook 'vlf-after-chunk-update-hook #'+vlf-update-linum)

;; Since this only works with absolute line numbers, let's make sure we use them.
(add-hook! 'vlf-mode-hook (setq-local display-line-numbers t))

The other thing that doesn’t work too well with VLF is searching with anything other than M-x occur. This is because trying to go to the next match at the end of a chunk usually wraps the point to the beginning of the chunk, instead of moving to the next chunk.

vlf-search-chunkingEmacs Lisp
#
(defun +vlf-next-chunk-or-start ()
  (if (= vlf-file-size vlf-end-pos)
      (vlf-jump-to-chunk 1)
    (vlf-next-batch 1))
  (goto-char (point-min)))

(defun +vlf-last-chunk-or-end ()
  (if (= 0 vlf-start-pos)
      (vlf-end-of-file)
    (vlf-prev-batch 1))
  (goto-char (point-max)))

(defun +vlf-isearch-wrap ()
  (if isearch-forward
      (+vlf-next-chunk-or-start)
    (+vlf-last-chunk-or-end)))

(add-hook! 'vlf-mode-hook (setq-local isearch-wrap-function #'+vlf-isearch-wrap))

Unfortunately, since evil-search doesn’t have an analogue to isearch-wrap-function, we can’t easily add support to it.

3.3.3. Eros

From the :tools eval module.

This package enables the very nice inline evaluation with gr and gR. The prefix could be slightly nicer though.

Emacs Lisp
#
(setq eros-eval-result-prefix "⟹ ") ; default =>

3.3.4. EVIL

From the :editor evil module.

When I want to make a substitution, I want it to be global more often than not — so let’s make that the default.

Now, EVIL cares a fair bit about keeping compatibility with Vim’s default behaviour. I don’t. There are some particular settings that I’d rather be something else, so let’s change them.

Emacs Lisp
#
(after! evil
  (setq evil-ex-substitute-global t     ; I like my s/../.. to by global by default
        evil-move-cursor-back nil       ; Don't move the block cursor when toggling insert mode
        evil-kill-on-visual-paste nil)) ; Don't put overwritten text in the kill ring

I don’t use evil-escape-mode, so I may as well turn it off, I’ve heard it contributes a typing delay. I’m not sure it’s much, but it is an extra pre-command-hook that I don’t benefit from, so… It seems that there’s a dedicated package for this, so instead of just disabling the mode on startup, let’s prevent installation of the package.

Emacs Lisp
#
(package! evil-escape :disable t)

3.3.5. Consult

From the :completion vertico module.

Since we’re using 3.4.11 too, the separation between buffers and files is already clear, and there’s no need for a different face.

Emacs Lisp
#
(after! consult
  (set-face-attribute 'consult-file nil :inherit 'consult-buffer)
  (setf (plist-get (alist-get 'perl consult-async-split-styles-alist) :initial) ";"))

3.3.6. Magit

From the :tools magit module.

Git

Magit is great as-is, thanks for making such a lovely package Jonas!

3.3.6.1. Allow usage of .authinfo file for authentication with password

For some cases, when ssh does not work, I would like to have magit not ask me the password every time I want to push. So, I want it to just look into the encrypted .authinfo.gpg file and figure the password out.

Emacs Lisp
#
(after! magit
        :config
        (add-hook 'magit-process-find-password-functions 'magit-process-password-auth-source))

There’s still a room for a little tweaking though…

Emacs Lisp
#
<<magit-toplevel>>
(after! magit
  <<magit-tweaks>>)
3.3.6.2. Easier forge remotes

When creating a new project, I often want the remote to be to my personal gitea instance. Let’s make that a bit more streamlined by introducing a quick-entry “default forge” option.

Emacs Lisp
#
(defvar +magit-default-forge-remote "gitea@git.tecosaur.net:tec/%s.git"
  "Format string that fills out to a remote from the repo name.
Set to nil to disable this functionality.")

While we’re at it, when creating a remote with the same name as my github username in a project where an https github remote already exists, let’s make the pre-filled remote url use ssh.

Emacs Lisp
#
(defadvice! +magit-remote-add--streamline-forge-a (args)
  :filter-args #'magit-remote-add
  (interactive
   (or (and +magit-default-forge-remote
            (not (magit-list-remotes))
            (eq (read-char-choice
                 (format "Setup %s remote? [y/n]: "
                         (replace-regexp-in-string
                          "\\`\\(?:[^@]+@\\|https://\\)\\([^:/]+\\)[:/].*\\'" "\\1"
                          +magit-default-forge-remote))
                 '(?y ?n))
                ?y)
            (let* ((default-name
                     (subst-char-in-string ?\s ?-
                                           (file-name-nondirectory
                                            (directory-file-name (doom-project-root)))))
                   (name (read-string "Name: " default-name)))
              (list "origin" (format +magit-default-forge-remote name)
                    (transient-args 'magit-remote))))
       (let ((origin (magit-get "remote.origin.url"))
             (remote (magit-read-string-ns "Remote name"))
             (gh-user (magit-get "github.user")))
         (when (and (equal remote gh-user)
                    (string-match "\\`https://github\\.com/\\([^/]+\\)/\\([^/]+\\)\\.git\\'"
                                  origin)
                    (not (string= (match-string 1 origin) gh-user)))
           (setq origin (replace-regexp-in-string
                         "\\`https://github\\.com/" "git@github.com:"
                         origin)))
         (list remote
               (magit-read-url
                "Remote url"
                (and origin
                     (string-match "\\([^:/]+\\)/[^/]+\\(\\.git\\)?\\'" origin)
                     (replace-match remote t t origin 1)))
               (transient-args 'magit-remote)))))
  args)
3.3.6.3. Commit message templates

One little thing I want to add is some per-project commit message templates.

Emacs Lisp
#
(defvar +magit-project-commit-templates-alist nil
  "Alist of toplevel dirs and template hf strings/functions.")
Emacs Lisp
#
(defun +magit-fill-in-commit-template ()
  "Insert template from `+magit-fill-in-commit-template' if applicable."
  (when-let ((template (and (save-excursion (goto-char (point-min)) (string-match-p "\\`\\s-*$" (thing-at-point 'line)))
                            (cdr (assoc (file-name-base (directory-file-name (magit-toplevel)))
                                        +magit-project-commit-templates-alist)))))
    (goto-char (point-min))
    (insert (if (stringp template) template (funcall template)))
    (goto-char (point-min))
    (end-of-line)))
(add-hook 'git-commit-setup-hook #'+magit-fill-in-commit-template 90)

This is particularly useful when creating commits for Org, as they need to follow a certain format and sometimes I forget elements (oops!).

Emacs Lisp
#
(defun +org-commit-message-template ()
  "Create a skeleton for an Org commit message based on the staged diff."
  (let (change-data last-file file-changes temp-point)
    (with-temp-buffer
      (apply #'call-process magit-git-executable
             nil t nil
             (append
              magit-git-global-arguments
              (list "diff" "--cached")))
      (goto-char (point-min))
      (while (re-search-forward "^@@\\|^\\+\\+\\+ b/" nil t)
        (if (looking-back "^\\+\\+\\+ b/" (line-beginning-position))
            (progn
              (push (list last-file file-changes) change-data)
              (setq last-file (buffer-substring-no-properties (point) (line-end-position))
                    file-changes nil))
          (setq temp-point (line-beginning-position))
          (re-search-forward "^\\+\\|^-" nil t)
          (end-of-line)
          (cond
           ((string-match-p "\\.el$" last-file)
            (when (re-search-backward "^\\(?:[+-]? *\\|@@[ +-\\d,]+@@ \\)(\\(?:cl-\\)?\\(?:defun\\|defvar\\|defmacro\\|defcustom\\)" temp-point t)
              (re-search-forward "\\(?:cl-\\)?\\(?:defun\\|defvar\\|defmacro\\|defcustom\\) " nil t)
              (add-to-list 'file-changes (buffer-substring-no-properties (point) (forward-symbol 1)))))
           ((string-match-p "\\.org$" last-file)
            (when (re-search-backward "^[+-]\\*+ \\|^@@[ +-\\d,]+@@ \\*+ " temp-point t)
              (re-search-forward "@@ \\*+ " nil t)
              (add-to-list 'file-changes (buffer-substring-no-properties (point) (line-end-position)))))))))
    (push (list last-file file-changes) change-data)
    (setq change-data (delete '(nil nil) change-data))
    (concat
     (if (= 1 (length change-data))
         (replace-regexp-in-string "^.*/\\|.[a-z]+$" "" (caar change-data))
       "?")
     ": \n\n"
     (mapconcat
      (lambda (file-changes)
        (if (cadr file-changes)
            (format "* %s (%s): "
                    (car file-changes)
                    (mapconcat #'identity (cadr file-changes) ", "))
          (format "* %s: " (car file-changes))))
      change-data
      "\n\n"))))

(add-to-list '+magit-project-commit-templates-alist (cons "org" #'+org-commit-message-template))

This relies on two small entries in the git config files which improves the hunk heading line selection for elisp and Org files.

gitconfig
#
[diff "lisp"]
  xfuncname = "^(((;;;+ )|\\(|([ \t]+\\(((cl-|el-patch-)?def(un|var|macro|method|custom)|gb/))).*)$"

[diff "org"]
  xfuncname = "^(\\*+ +.*)$"
3.3.6.4. Magit delta

Delta is a git diff syntax highlighter written in rust. The author also wrote a package to hook this into the magit diff view (which don’t get any syntax highlighting by default). This requires the delta binary. It’s packaged on some distributions, but most reliably installed through Rust’s package manager cargo.

Shell Script
#
cargo install git-delta

Now we can make use of the package for this.

Emacs Lisp
#
;; (package! magit-delta :recipe (:host github :repo "dandavison/magit-delta") :pin "5fc7dbddcfacfe46d3fd876172ad02a9ab6ac616")

All that’s left is to hook it into magit

Emacs Lisp
#
;; (magit-delta-mode +1)

Unfortunately this currently seems to mess things up, which is something I’ll want to look into later.

3.3.7. Smerge

For repeated operations, a hydra would be helpful. But I prefer transient.

Emacs Lisp
#
(defun smerge-repeatedly ()
  "Perform smerge actions again and again"
  (interactive)
  (smerge-mode 1)
  (smerge-transient))
(after! transient
  (transient-define-prefix smerge-transient ()
    [["Move"
      ("n" "next" (lambda () (interactive) (ignore-errors (smerge-next)) (smerge-repeatedly)))
      ("p" "previous" (lambda () (interactive) (ignore-errors (smerge-prev)) (smerge-repeatedly)))]
     ["Keep"
      ("b" "base" (lambda () (interactive) (ignore-errors (smerge-keep-base)) (smerge-repeatedly)))
      ("u" "upper" (lambda () (interactive) (ignore-errors (smerge-keep-upper)) (smerge-repeatedly)))
      ("l" "lower" (lambda () (interactive) (ignore-errors (smerge-keep-lower)) (smerge-repeatedly)))
      ("a" "all" (lambda () (interactive) (ignore-errors (smerge-keep-all)) (smerge-repeatedly)))
      ("RET" "current" (lambda () (interactive) (ignore-errors (smerge-keep-current)) (smerge-repeatedly)))]
     ["Diff"
      ("<" "upper/base" (lambda () (interactive) (ignore-errors (smerge-diff-base-upper)) (smerge-repeatedly)))
      ("=" "upper/lower" (lambda () (interactive) (ignore-errors (smerge-diff-upper-lower)) (smerge-repeatedly)))
      (">" "base/lower" (lambda () (interactive) (ignore-errors (smerge-diff-base-lower)) (smerge-repeatedly)))
      ("R" "refine" (lambda () (interactive) (ignore-errors (smerge-refine)) (smerge-repeatedly)))
      ("E" "ediff" (lambda () (interactive) (ignore-errors (smerge-ediff)) (smerge-repeatedly)))]
     ["Other"
      ("c" "combine" (lambda () (interactive) (ignore-errors (smerge-combine-with-next)) (smerge-repeatedly)))
      ("r" "resolve" (lambda () (interactive) (ignore-errors (smerge-resolve)) (smerge-repeatedly)))
      ("k" "kill current" (lambda () (interactive) (ignore-errors (smerge-kill-current)) (smerge-repeatedly)))
      ("q" "quit" (lambda () (interactive) (smerge-auto-leave)))]]))

3.3.8. Company

From the :completion company module.

It’s nice to have completions almost all the time, in my opinion. Key strokes are just waiting to be saved!

Emacs Lisp
#
(after! company
  (setq company-idle-delay 0.5
        company-minimum-prefix-length 2)
  (setq company-show-numbers t)
  (add-hook 'evil-normal-state-entry-hook #'company-abort)) ;; make aborting less annoying.

Now, the improvements from precedent are mostly from remembering history, so let’s improve that memory.

Emacs Lisp
#
(setq-default history-length 1000)
(setq-default prescient-history-length 1000)
3.3.8.1. Plain Text

Ispell is nice, let’s have it in text, markdown, and GFM.

Emacs Lisp
#
(set-company-backend!
  '(text-mode
    markdown-mode
    gfm-mode)
  '(:seperate
    company-ispell
    company-files
    company-yasnippet))

We then configure the dictionary we’re using in Ispell.

3.3.8.2. ESS

company-dabbrev-code is nice. Let’s have it.

Emacs Lisp
#
(set-company-backend! 'ess-r-mode '(company-R-args company-R-objects company-dabbrev-code :separate))

3.3.9. Projectile

From the :core packages module.

Looking at documentation via SPC h f and SPC h v and looking at the source can add package src directories to projectile. This isn’t desirable in my opinion.

Emacs Lisp
#
(setq projectile-ignored-projects
      (list "~/" "/tmp" (expand-file-name "straight/repos" doom-local-dir)))
(defun projectile-ignored-project-function (filepath)
  "Return t if FILEPATH is within any of `projectile-ignored-projects'"
  (or (mapcar (lambda (p) (s-starts-with-p p filepath)) projectile-ignored-projects)))

3.3.10. Ispell

3.3.10.1. Downloading dictionaries

Let’s get a nice big dictionary from SCOWL Custom List/Dictionary Creator with the following configuration

size
80 (huge)
spellings
British(-ise) and Australian
spelling variants level
0
diacritics
keep
extra lists
hacker, roman numerals
3.3.10.1.1. Hunspell
Shell Script
#
cd /tmp
curl -o "hunspell-en-custom.zip" 'http://app.aspell.net/create?max_size=80&spelling=GBs&spelling=AU&max_variant=0&diacritic=keep&special=hacker&special=roman-numerals&encoding=utf-8&format=inline&download=hunspell'
unzip "hunspell-en-custom.zip"

sudo chown root:root en-custom.*
sudo mv en-custom.{aff,dic} /usr/share/myspell/
3.3.10.1.2. Aspell
Shell Script
#
cd /tmp
curl -o "aspell6-en-custom.tar.bz2" 'http://app.aspell.net/create?max_size=80&spelling=GBs&spelling=AU&max_variant=0&diacritic=keep&special=hacker&special=roman-numerals&encoding=utf-8&format=inline&download=aspell'
tar -xjf "aspell6-en-custom.tar.bz2"

cd aspell6-en-custom
./configure && make && sudo make install
3.3.10.2. Configuration
Emacs Lisp
#
(setq ispell-dictionary "en-custom")

Oh, and by the way, if company-ispell-dictionary is nil, then ispell-complete-word-dict is used instead, which once again when nil is ispell-alternate-dictionary, which at the moment maps to a plaintext version of the above.

It seems reasonable to want to keep an eye on my personal dict, let’s have it nearby (also means that if I change the ’main’ dictionary I keep my addition).

Emacs Lisp
#
(setq ispell-personal-dictionary
      (expand-file-name "misc/ispell_personal" doom-private-dir))

3.3.11. TRAMP

Another lovely Emacs feature, TRAMP stands for Transparent Remote Access, Multiple Protocol. In brief, it’s a lovely way to wander around outside your local filesystem.

3.3.11.1. Prompt recognition

Unfortunately, when connecting to remote machines Tramp can be a wee pit picky with the prompt format. Let’s try to get Bash, and be a bit more permissive with prompt recognition.

Emacs Lisp
#
(after! tramp
  (setenv "SHELL" "/bin/bash")
  (setq tramp-shell-prompt-pattern "\\(?:^\\|\n\\|\x0d\\)[^]#$%>\n]*#?[]#$%>] *\\(\e\\[[0-9;]*[a-zA-Z] *\\)*")) ;; default + 
3.3.11.2. Troubleshooting

In case the remote shell is misbehaving, here are some things to try

3.3.11.2.1. Zsh

There are some escape code you don’t want, let’s make it behave more considerately.

Shell Script
#
if [[ "$TERM" == "dumb" ]]; then
    unset zle_bracketed_paste
    unset zle
    PS1='$ '
    return
fi
3.3.11.3. Guix

Guix puts some binaries that TRAMP looks for in unexpected locations. That’s no problem though, we just need to help TRAMP find them.

Emacs Lisp
#
(after! tramp
  (appendq! tramp-remote-path
            '("~/.guix-profile/bin" "~/.guix-profile/sbin"
              "/run/current-system/profile/bin"
              "/run/current-system/profile/sbin")))

3.3.12. Auto activating snippets

Sometimes pressing TAB is just too much.

Emacs Lisp
#
(package! aas :recipe (:host github :repo "ymarco/auto-activating-snippets")
  :pin "e92b5cffa4e87c221c24f3e72ae33959e1ec2b68")
Emacs Lisp
#
(use-package! aas
  :commands aas-mode)

3.3.13. Screenshot

This makes it a breeze to take lovely screenshots.

Emacs Lisp
#
(package! screenshot :recipe (:local-repo "lisp/screenshot"))
Example screenshot.el screenshot

Some light configuring is all we need, so we can make use of the 0x0 wrapper file uploading script (which I’ve renamed to upload).

Emacs Lisp
#
(use-package! screenshot
  :defer t
  :config (setq screenshot-upload-fn "upload %s 2>/dev/null"))

3.3.14. Etrace

The Emacs Lisp Profiler (ELP) does a nice job recording information, but it isn’t the best for looking at results. etrace converts ELP’s results to the “Chromium Catapult Trace Event Format”. This means that the output of etrace can be loaded in something like the speedscope webapp for easier profile investigation.

Emacs Lisp
#
(package! etrace :recipe (:host github :repo "aspiers/etrace")
  :pin "2291ccf2f2ccc80a6aac4664e8ede736ceb672b7")
Emacs Lisp
#
(use-package! etrace
  :after elp)

3.3.15. YASnippet

From the :editor snippets module.

Nested snippets are good, so let’s enable that.

Emacs Lisp
#
(setq yas-triggers-in-field t)

3.3.16. String inflection

For when you want to change the case pattern for a symbol.

Emacs Lisp
#
(package! string-inflection :pin "50ad54970b3cc79b6b83979bde9889ad9a9e1a9c")
Emacs Lisp
#
(use-package! string-inflection
  :commands (string-inflection-all-cycle
             string-inflection-toggle
             string-inflection-camelcase
             string-inflection-lower-camelcase
             string-inflection-kebab-case
             string-inflection-underscore
             string-inflection-capital-underscore
             string-inflection-upcase)
  :init
  (map! :leader :prefix ("c~" . "naming convention")
        :desc "cycle" "~" #'string-inflection-all-cycle
        :desc "toggle" "t" #'string-inflection-toggle
        :desc "CamelCase" "c" #'string-inflection-camelcase
        :desc "downCase" "d" #'string-inflection-lower-camelcase
        :desc "kebab-case" "k" #'string-inflection-kebab-case
        :desc "under_score" "_" #'string-inflection-underscore
        :desc "Upper_Score" "u" #'string-inflection-capital-underscore
        :desc "UP_CASE" "U" #'string-inflection-upcase)
  (after! evil
    (evil-define-operator evil-operator-string-inflection (beg end _type)
      "Define a new evil operator that cycles symbol casing."
      :move-point nil
      (interactive "<R>")
      (string-inflection-all-cycle)
      (setq evil-repeat-info '([?g ?~])))
    (define-key evil-normal-state-map (kbd "g~") 'evil-operator-string-inflection)))

3.3.17. Smart parentheses

From the :core packages module.

Emacs Lisp
#
(sp-local-pair
 '(org-mode)
 "<<" ">>"
 :actions '(insert))

3.4. Visuals

3.4.1. Info colours

This makes manual pages nicer to look at by adding variable pitch fontification and colouring 🙂.

Example info-colours page.
Emacs Lisp
#
(package! info-colors :pin "2e237c301ba62f0e0286a27c1abe48c4c8441143")

To use this we’ll just hook it into Info.

Emacs Lisp
#
(use-package! info-colors
  :commands (info-colors-fontify-node))

(add-hook 'Info-selection-hook 'info-colors-fontify-node)
Example colourised info page

3.4.2. Modus themes

Proteolas did a lovely job with the Modus themes, so much so that they were welcomed into Emacs 28. However, he is also rather attentive with updates, and so I’d like to make sure we have a recent version.

Emacs Lisp
#
(package! modus-themes :pin "18dd2457d233859ad4d102d797d6744525177ac4")

3.4.3. Spacemacs themes

Emacs Lisp
#
(package! spacemacs-theme :pin "1ec73d68b0f120f92538d9a329a3a46e32f74510")

3.4.4. Theme magic

With all our fancy Emacs themes, my terminal is missing out!

Emacs Lisp
#
(package! theme-magic :pin "844c4311bd26ebafd4b6a1d72ddcc65d87f074e3")

This operates using pywal, which is present in some repositories, but most reliably installed with pip.

Shell Script
#
sudo python3 -m pip install pywal

Theme magic takes a look at a number of faces, the saturation levels, and colour differences to try to cleverly pick eight colours to use. However, it uses the same colours for the light variants, and doesn’t always make the best picks. Since we’re using doom-themes, our life is a little easier and we can use the colour utilities from Doom themes to easily grab sensible colours and generate lightened versions — let’s do that.

Emacs Lisp
#
(use-package! theme-magic
  :commands theme-magic-from-emacs
  :config
  (defadvice! theme-magic--auto-extract-16-doom-colors ()
    :override #'theme-magic--auto-extract-16-colors
    (list
     (face-attribute 'default :background)
     (doom-color 'error)
     (doom-color 'success)
     (doom-color 'type)
     (doom-color 'keywords)
     (doom-color 'constants)
     (doom-color 'functions)
     (face-attribute 'default :foreground)
     (face-attribute 'shadow :foreground)
     (doom-blend 'base8 'error 0.1)
     (doom-blend 'base8 'success 0.1)
     (doom-blend 'base8 'type 0.1)
     (doom-blend 'base8 'keywords 0.1)
     (doom-blend 'base8 'constants 0.1)
     (doom-blend 'base8 'functions 0.1)
     (face-attribute 'default :foreground))))

3.4.5. Simple comment markup

I find that every now and then I sprinkle a little markup in code comments. Of course, this doesn’t get fortified as it’s ultimately meaningless … but it would be nice if it was, just slightly. Surprisingly, I couldn’t find a package for this, so I made one.

Emacs Lisp
#
(package! simple-comment-markup :recipe (:local-repo "lisp/simple-comment-markup"))

Let’s use both basic Org markup and Markdown code backticks, to cover most situations decently.

Emacs Lisp
#
(use-package! simple-comment-markup
  :hook (prog-mode . simple-comment-markup-mode)
  :config
  (setq simple-comment-markup-set '(org markdown-code)))

3.4.6. Emojify

From the :ui emoji module.

For starters, twitter’s emojis look nicer than emoji-one. Other than that, this is pretty great OOTB 😀.

Emacs Lisp
#
(setq emojify-emoji-set "twemoji-v2")

One minor annoyance is the use of emojis over the default character when the default is actually preferred. This occurs with overlay symbols I use in Org mode, such as checkbox state, and a few other miscellaneous cases.

We can accommodate our preferences by deleting those entries from the emoji hash table

Emacs Lisp
#
(defvar emojify-disabled-emojis
  '(;; Org
    "◼" "☑" "☸" "⚙" "⏩" "⏪" "⬆" "⬇" "❓" "↔"
    ;; Terminal powerline
    "✔"
    ;; Box drawing
    "▶" "◀"
    ;; I just want to see this as text
    "©" "™")
  "Characters that should never be affected by `emojify-mode'.")

(defadvice! emojify-delete-from-data ()
  "Ensure `emojify-disabled-emojis' don't appear in `emojify-emojis'."
  :after #'emojify-set-emoji-data
  (dolist (emoji emojify-disabled-emojis)
    (remhash emoji emojify-emojis)))

Now, it would be good to have a minor mode which allowed you to type ascii/gh emojis and get them converted to unicode. Let’s make one.

Emacs Lisp
#
(defun emojify--replace-text-with-emoji (orig-fn emoji text buffer start end &optional target)
  "Modify `emojify--propertize-text-for-emoji' to replace ascii/github emoticons with unicode emojis, on the fly."
  (if (or (not emoticon-to-emoji) (= 1 (length text)))
      (funcall orig-fn emoji text buffer start end target)
    (delete-region start end)
    (insert (ht-get emoji "unicode"))))

(define-minor-mode emoticon-to-emoji
  "Write ascii/gh emojis, and have them converted to unicode live."
  :global nil
  :init-value nil
  (if emoticon-to-emoji
      (progn
        (setq-local emojify-emoji-styles '(ascii github unicode))
        (advice-add 'emojify--propertize-text-for-emoji :around #'emojify--replace-text-with-emoji)
        (unless emojify-mode
          (emojify-turn-on-emojify-mode)))
    (setq-local emojify-emoji-styles (default-value 'emojify-emoji-styles))
    (advice-remove 'emojify--propertize-text-for-emoji #'emojify--replace-text-with-emoji)))

This new minor mode of ours will be nice for messages, so let’s hook it in for Email and IRC.

Emacs Lisp
#
(add-hook! '(mu4e-compose-mode org-msg-edit-mode circe-channel-mode) (emoticon-to-emoji 1))

3.4.7. Doom modeline

From the :ui modeline module.

3.4.7.1. Modified buffer colour

The modeline is very nice and pretty, however I have a few niggles with the defaults. For starters, by default red text is used to indicate an unsaved file. This makes me feel like something’s gone wrong, so let’s tone that down to orange.

Emacs Lisp
#
(custom-set-faces!
  '(doom-modeline-buffer-modified :foreground "orange"))
3.4.7.2. Height

The default size (25) makes for a rather narrow mode line. To me, the modeline feels a bit comfier if we give it a bit more space. I find 45 adds roughly a third of the line height as padding above and below.

Emacs Lisp
#
(setq doom-modeline-height 45)
3.4.7.3. File encoding

While we’re modifying the modeline, when we have the default file encoding (LF UTF-8), it really isn’t worth noting in the modeline. So, why not conditionally hide it?

Emacs Lisp
#
(defun doom-modeline-conditional-buffer-encoding ()
  "We expect the encoding to be LF UTF-8, so only show the modeline when this is not the case"
  (setq-local doom-modeline-buffer-encoding
              (unless (and (memq (plist-get (coding-system-plist buffer-file-coding-system) :category)
                                 '(coding-category-undecided coding-category-utf-8))
                           (not (memq (coding-system-eol-type buffer-file-coding-system) '(1 2))))
                t)))

(add-hook 'after-change-major-mode-hook #'doom-modeline-conditional-buffer-encoding)
3.4.7.4. Time

Moving onto the modeline segments, there’s a calendar icon showed next to the current time, which I’m not a fan of. Let’s replace that by redefining the segment. Instead of the calendar, it would be much nicer to have an updating analog clock, so let’s use that idea as an excuse to try out the Emacs svg library.

First, we’ll need a way to produce svg clocks on-demand.

Emacs Lisp
#
(defvar micro-clock-hour-hand-ratio 0.45
  "Length of the hour hand as a proportion of the radius.")
(defvar micro-clock-minute-hand-ratio 0.7
  "Length of the minute hand as a proportion of the radius.")

(defun micro-clock-svg (hour minute radius color)
  "Construct an SVG clock showing the time HOUR:MINUTE.
The clock will be of the specified RADIUS and COLOR."
  (let ((hour-x (* radius (sin (* (- 6 hour (/ minute 60.0)) (/ float-pi 6)))
                   micro-clock-hour-hand-ratio))
        (hour-y (* radius (cos (* (- 6 hour (/ minute 60.0)) (/ float-pi 6)))
                   micro-clock-hour-hand-ratio))
        (minute-x (* radius (sin (* (- 30 minute) (/ float-pi 30)))
                     micro-clock-minute-hand-ratio))
        (minute-y (* radius (cos (* (- 30 minute) (/ float-pi 30)))
                     micro-clock-minute-hand-ratio))
        (svg (svg-create (* 2 radius) (* 2 radius) :stroke color)))
    (svg-circle svg radius radius (1- radius) :fill "none" :stroke-width 2)
    (svg-circle svg radius radius 1 :fill color :stroke "none")
    (svg-line svg radius radius (+ radius hour-x) (+ radius hour-y)
              :stroke-width 2)
    (svg-line svg radius radius (+ radius minute-x) (+ radius minute-y)
              :stroke-width 1.5)
    svg))

With that out the way, we need to figure out how to integrate this into the modeline. For the most part this was fairly easy, the tricky part was getting the alignment right. I tried using the (raise FACTOR) display property, but that doesn’t appear to combine with images. Looking at the documentation on image descriptors though, I came across the :ascent property, which looked rather promising. By setting :ascent center the image is centred relative to the text, which is exactly what we need. With that sorted, we just add some caching and the obvious customisations and we’ve got modeline-appropriate clock generation!

Emacs Lisp
#
(require 'svg)

(defvar +doom-modeline-micro-clock-minute-resolution 1
  "The clock will be updated every this many minutes, truncating.")
(defvar +doom-modeline-micro-clock-inverse-size 4.8
  "The size of the clock, as an inverse proportion to the mode line height.")

(defvar +doom-modeline-micro-clock--cache nil)

(defvar +doom-modeline-clock-text-format "%c")

(defun +doom-modeline--clock-text (&optional _window _object _pos)
  (format-time-string +doom-modeline-clock-text-format))

(defun +doom-modeline-micro-clock ()
  "Return a string containing an current analogue clock."
  (cdr
   (if (equal (truncate (float-time)
                        (* +doom-modeline-micro-clock-minute-resolution 60))
              (car +doom-modeline-micro-clock--cache))
       +doom-modeline-micro-clock--cache
     (setq +doom-modeline-micro-clock--cache
           (cons (truncate (float-time)
                           (* +doom-modeline-micro-clock-minute-resolution 60))
                 (with-temp-buffer
                   (svg-insert-image
                    (micro-clock-svg
                     (string-to-number (format-time-string "%-I")) ; hour
                     (* (truncate (string-to-number (format-time-string "%-M"))
                                  +doom-modeline-micro-clock-minute-resolution)
                        +doom-modeline-micro-clock-minute-resolution) ; minute
                     (/ doom-modeline-height +doom-modeline-micro-clock-inverse-size) ; radius
                     "currentColor"))
                   (propertize
                    " "
                    'display
                    (append (get-text-property 0 'display (buffer-string))
                            '(:ascent center))
                    'face 'doom-modeline-time
                    'help-echo #'+doom-modeline--clock-text)))))))

With clock generation sorted out, all that’s to be done is replacing the time modeline segment with our design.

Emacs Lisp
#
(doom-modeline-def-segment time
  (when (and doom-modeline-time
             (bound-and-true-p display-time-mode)
             (not doom-modeline--limited-width-p))
    (concat
     doom-modeline-spc
     (when doom-modeline-time-icon
       (concat
        (+doom-modeline-micro-clock)
        (and (or doom-modeline-icon doom-modeline-unicode-fallback)
             doom-modeline-spc)))
     (propertize display-time-string
                 'face (doom-modeline-face 'doom-modeline-time)))))
3.4.7.5. PDF modeline

I think the PDF modeline could do with tweaking. I raised an issue on this, however the response was basically “put your preferences in your personal config, the current default is sensible” — so here we are.

First up I’m going to want a segment for just the buffer file name, and a PDF icon. Then we’ll redefine two functions used to generate the modeline.

Emacs Lisp
#
(doom-modeline-def-segment buffer-name
  "Display the current buffer's name, without any other information."
  (concat
   doom-modeline-spc
   (doom-modeline--buffer-name)))

(doom-modeline-def-segment pdf-icon
  "PDF icon from all-the-icons."
  (concat
   doom-modeline-spc
   (doom-modeline-icon 'octicon "file-pdf" nil nil
                       :face (if (doom-modeline--active)
                                 'all-the-icons-red
                               'mode-line-inactive)
                       :v-adjust 0.02)))

(defun doom-modeline-update-pdf-pages ()
  "Update PDF pages."
  (setq doom-modeline--pdf-pages
        (let ((current-page-str (number-to-string (eval `(pdf-view-current-page))))
              (total-page-str (number-to-string (pdf-cache-number-of-pages))))
          (concat
           (propertize
            (concat (make-string (- (length total-page-str) (length current-page-str)) ? )
                    " P" current-page-str)
            'face 'mode-line)
           (propertize (concat "/" total-page-str) 'face 'doom-modeline-buffer-minor-mode)))))

(doom-modeline-def-segment pdf-pages
  "Display PDF pages."
  (if (doom-modeline--active) doom-modeline--pdf-pages
    (propertize doom-modeline--pdf-pages 'face 'mode-line-inactive)))

(doom-modeline-def-modeline 'pdf
  '(bar window-number pdf-pages pdf-icon buffer-name)
  '(misc-info matches major-mode process vcs))

3.4.8. Keycast

For some reason, I find myself demoing Emacs every now and then. Showing what keyboard stuff I’m doing on-screen seems helpful. While screenkey does exist, having something that doesn’t cover up screen content is nice.

Screenshot of Keycast-mode in action
Emacs Lisp
#
(package! keycast :pin "72d9add8ba16e0cae8cfcff7fc050fa75e493b4e")

Let’s just make sure this is lazy-loaded appropriately.

Emacs Lisp
#
(use-package! keycast
  :commands keycast-mode
  :config
  (define-minor-mode keycast-mode
    "Show current command and its key binding in the mode line."
    :global t
    (if keycast-mode
        (progn
          (add-hook 'pre-command-hook 'keycast--update t)
          (add-to-list 'global-mode-string '("" mode-line-keycast " ")))
      (remove-hook 'pre-command-hook 'keycast--update)
      (setq global-mode-string (remove '("" mode-line-keycast " ") global-mode-string))))
  (custom-set-faces!
    '(keycast-command :inherit doom-modeline-debug
                      :height 0.9)
    '(keycast-key :inherit custom-modified
                  :height 1.1
                  :weight bold)))

3.4.9. Screencast

In a similar manner to 3.4.8, gif-screencast may come in handy.

Emacs Lisp
#
(package! gif-screencast :pin "adec408e6adab2e8e057fe0ad828749f473bfb83")

We can lazy load this using the start/stop commands.

I initially installed scrot for this, since it was the default capture program. However it raised glib error: Saving to file ... failed each time it was run. Google didn’t reveal any easy fixed, so I switched to maim. We now need to pass it the window ID. This doesn’t change throughout the lifetime of an emacs instance, so as long as a single window is used xdotool getactivewindow will give a satisfactory result.

It seems that when new colours appear, that tends to make gifsicle introduce artefacts. To avoid this we pre-populate the colour map using the current doom theme.

Emacs Lisp
#
(use-package! gif-screencast
  :commands gif-screencast-mode
  :config
  (map! :map gif-screencast-mode-map
        :g "<f8>" #'gif-screencast-toggle-pause
        :g "<f9>" #'gif-screencast-stop)
  (setq gif-screencast-program "maim"
        gif-screencast-args `("--quality" "3" "-i" ,(string-trim-right
                                                     (shell-command-to-string
                                                      "xdotool getactivewindow")))
        gif-screencast-optimize-args '("--batch" "--optimize=3" "--usecolormap=/tmp/doom-color-theme"))
  (defun gif-screencast-write-colormap ()
    (f-write-text
     (replace-regexp-in-string
      "\n+" "\n"
      (mapconcat (lambda (c) (if (listp (cdr c))
                                 (cadr c))) doom-themes--colors "\n"))
     'utf-8
     "/tmp/doom-color-theme" ))
  (gif-screencast-write-colormap)
  (add-hook 'doom-load-theme-hook #'gif-screencast-write-colormap))

3.4.10. Mixed pitch

From the :ui zen module.

We’d like to use mixed pitch in certain modes. If we simply add a hook, when directly opening a file with (a new) Emacs mixed-pitch-mode runs before UI initialisation, which is problematic. To resolve this, we create a hook that runs after UI initialisation and both

  • conditionally enables mixed-pitch-mode
  • sets up the mixed pitch hooks
Emacs Lisp
#
(defvar mixed-pitch-modes '(org-mode LaTeX-mode markdown-mode gfm-mode Info-mode)
  "Modes that `mixed-pitch-mode' should be enabled in, but only after UI initialisation.")
(defun init-mixed-pitch-h ()
  "Hook `mixed-pitch-mode' into each mode in `mixed-pitch-modes'.
Also immediately enables `mixed-pitch-modes' if currently in one of the modes."
  (when (memq major-mode mixed-pitch-modes)
    (mixed-pitch-mode 1))
  (dolist (hook mixed-pitch-modes)
    (add-hook (intern (concat (symbol-name hook) "-hook")) #'mixed-pitch-mode)))
(add-hook 'doom-init-ui-hook #'init-mixed-pitch-h)

As mixed pitch uses the variable mixed-pitch-face, we can create a new function to apply mixed pitch with a serif face instead of the default (see the subsequent face definition). This was created for writeroom mode.

Emacs Lisp
#
(autoload #'mixed-pitch-serif-mode "mixed-pitch"
  "Change the default face of the current buffer to a serifed variable pitch, while keeping some faces fixed pitch." t)

(setq! variable-pitch-serif-font (font-spec :family "Alegreya" :size 27))

(after! mixed-pitch
  (setq mixed-pitch-set-height t)
  (set-face-attribute 'variable-pitch-serif nil :font variable-pitch-serif-font)
  (defun mixed-pitch-serif-mode (&optional arg)
    "Change the default face of the current buffer to a serifed variable pitch, while keeping some faces fixed pitch."
    (interactive)
    (let ((mixed-pitch-face 'variable-pitch-serif))
      (mixed-pitch-mode (or arg 'toggle)))))

Now, as Harfbuzz is currently used in Emacs, we’ll be missing out on the following Alegreya ligatures:

ff ff ffi ffi ffj ffj ffl ffl fft fft fi fi fj fj ft ft Th Th

Thankfully, it isn’t to hard to add these to the composition-function-table.

Emacs Lisp
#
(set-char-table-range composition-function-table ?f '(["\\(?:ff?[fijlt]\\)" 0 font-shape-gstring]))
(set-char-table-range composition-function-table ?T '(["\\(?:Th\\)" 0 font-shape-gstring]))
3.4.10.1. Variable pitch serif font

It would be nice if we were able to make use of a serif version of the variable-pitch face. Since this doesn’t already exist, let’s create it.

Emacs Lisp
#
(defface variable-pitch-serif
    '((t (:family "serif")))
    "A variable-pitch face with serifs."
    :group 'basic-faces)

For ease of use, let’s also set up an easy way of setting the :font attribute.

Emacs Lisp
#
(defcustom variable-pitch-serif-font (font-spec :family "serif")
  "The font face used for `variable-pitch-serif'."
  :group 'basic-faces
  :set (lambda (symbol value)
         (set-face-attribute 'variable-pitch-serif nil :font value)
         (set-default-toplevel-value symbol value)))

3.4.11. Marginalia

Part of the :completion vertico module.

Marginalia is nice, but the file metadata annotations are a little too plain. Specifically, I have these gripes

  • File attributes would be nicer if coloured
  • I don’t care about the user/group information if the user/group is me
  • When a file time is recent, a relative age (e.g. 2h ago) is more useful than the date
  • An indication of file fatness would be nice

Thanks to the marginalia-annotator-registry, we don’t have to advise, we can just add a new file annotator.

Another small thing is the face used for docstrings. At the moment it’s (italic shadow), but I don’t like that.

Emacs Lisp
#
(after! marginalia
  (setq marginalia-censor-variables nil)

  (defadvice! +marginalia--anotate-local-file-colorful (cand)
    "Just a more colourful version of `marginalia--anotate-local-file'."
    :override #'marginalia--annotate-local-file
    (when-let (attrs (file-attributes (substitute-in-file-name
                                       (marginalia--full-candidate cand))
                                      'integer))
      (marginalia--fields
       ((marginalia--file-owner attrs)
        :width 12 :face 'marginalia-file-owner)
       ((marginalia--file-modes attrs))
       ((+marginalia-file-size-colorful (file-attribute-size attrs))
        :width 7)
       ((+marginalia--time-colorful (file-attribute-modification-time attrs))
        :width 12))))

  (defun +marginalia--time-colorful (time)
    (let* ((seconds (float-time (time-subtract (current-time) time)))
           (color (doom-blend
                   (face-attribute 'marginalia-date :foreground nil t)
                   (face-attribute 'marginalia-documentation :foreground nil t)
                   (/ 1.0 (log (+ 3 (/ (+ 1 seconds) 345600.0)))))))
      ;; 1 - log(3 + 1/(days + 1)) % grey
      (propertize (marginalia--time time) 'face (list :foreground color))))

  (defun +marginalia-file-size-colorful (size)
    (let* ((size-index (/ (log10 (+ 1 size)) 7.0))
           (color (if (< size-index 10000000) ; 10m
                      (doom-blend 'orange 'green size-index)
                    (doom-blend 'red 'orange (- size-index 1)))))
      (propertize (file-size-human-readable size) 'face (list :foreground color)))))

3.4.12. Centaur Tabs

From the :ui tabs module.

We want to make the tabs a nice, comfy size (36), with icons. The modifier marker is nice, but the particular default Unicode one causes a lag spike, so let’s just switch to an o, which still looks decent but doesn’t cause any issues. An ’active-bar’ is nice, so let’s have one of those. If we have it under needs us to turn on x-underline-at-decent though. For some reason this didn’t seem to work inside the (after! ... ) block ¯\_(ツ)_/¯. Then let’s change the font to a sans serif, but the default one doesn’t fit too well somehow, so let’s switch to ’P22 Underground Book’; it looks much nicer.

Emacs Lisp
#
(after! centaur-tabs
  (centaur-tabs-mode -1)
  (setq centaur-tabs-height 36
        centaur-tabs-set-icons t
        centaur-tabs-modified-marker "o"
        centaur-tabs-close-button "×"
        centaur-tabs-set-bar 'above
        centaur-tabs-gray-out-icons 'buffer)
  (centaur-tabs-change-fonts "P22 Underground Book" 160))
;; (setq x-underline-at-descent-line t)

3.4.13. All the icons

From the :core packages module.

all-the-icons does a generally great job giving file names icons. One minor niggle I have is that when I open a .m file, it’s much more likely to be Matlab than Objective-C. As such, it’ll be switching the icon associated with .m.

Emacs Lisp
#
(after! all-the-icons
  (setcdr (assoc "m" all-the-icons-extension-icon-alist)
          (cdr (assoc "matlab" all-the-icons-extension-icon-alist))))

3.4.14. Prettier page breaks

In some files, ^L appears as a page break character. This isn’t that visually appealing, and Steve Purcell has been nice enough to make a package to display these as horizontal rules.

Emacs Lisp
#
(package! page-break-lines :recipe (:host github :repo "purcell/page-break-lines")
  :pin "79eca86e0634ac68af862e15c8a236c37f446dcd")
Emacs Lisp
#
(use-package! page-break-lines
  :commands page-break-lines-mode
  :init
  (autoload 'turn-on-page-break-lines-mode "page-break-lines")
  :config
  (setq page-break-lines-max-width fill-column)
  (map! :prefix "g"
        :desc "Prev page break" :nv "[" #'backward-page
        :desc "Next page break" :nv "]" #'forward-page))

3.4.15. Writeroom

From the :ui zen module.

For starters, I think Doom is a bit over-zealous when zooming in

Emacs Lisp
#
(setq +zen-text-scale 0.8)

Then, when using Org it would be nice to make a number of other aesthetic tweaks. Namely:

  • Use a serifed variable-pitch font
  • Hiding headline leading stars
  • Using fleurons as headline bullets
  • Hiding line numbers
  • Removing outline indentation
  • Centring the text
Emacs Lisp
#
(defvar +zen-serif-p t
  "Whether to use a serifed font with `mixed-pitch-mode'.")
(defvar +zen-org-starhide t
  "The value `org-modern-hide-stars' is set to.")

(after! writeroom-mode
  (defvar-local +zen--original-org-indent-mode-p nil)
  (defvar-local +zen--original-mixed-pitch-mode-p nil)
  (defun +zen-enable-mixed-pitch-mode-h ()
    "Enable `mixed-pitch-mode' when in `+zen-mixed-pitch-modes'."
    (when (apply #'derived-mode-p +zen-mixed-pitch-modes)
      (if writeroom-mode
          (progn
            (setq +zen--original-mixed-pitch-mode-p mixed-pitch-mode)
            (funcall (if +zen-serif-p #'mixed-pitch-serif-mode #'mixed-pitch-mode) 1))
        (funcall #'mixed-pitch-mode (if +zen--original-mixed-pitch-mode-p 1 -1)))))
  (defun +zen-prose-org-h ()
    "Reformat the current Org buffer appearance for prose."
    (when (eq major-mode 'org-mode)
      (setq display-line-numbers nil
            visual-fill-column-width 60
            org-adapt-indentation nil)
      (when (featurep 'org-modern)
        (setq-local org-modern-star '("🙘" "🙙" "🙚" "🙛")
                    ;; org-modern-star '("🙐" "🙑" "🙒" "🙓" "🙔" "🙕" "🙖" "🙗")
                    org-modern-hide-stars +zen-org-starhide)
        (org-modern-mode -1)
        (org-modern-mode 1))
      (setq
       +zen--original-org-indent-mode-p org-indent-mode)
      (org-indent-mode -1)))
  (defun +zen-nonprose-org-h ()
    "Reverse the effect of `+zen-prose-org'."
    (when (eq major-mode 'org-mode)
      (when (bound-and-true-p org-modern-mode)
        (org-modern-mode -1)
        (org-modern-mode 1))
      (when +zen--original-org-indent-mode-p (org-indent-mode 1))))
  (pushnew! writeroom--local-variables
            'display-line-numbers
            'visual-fill-column-width
            'org-adapt-indentation
            'org-modern-mode
            'org-modern-star
            'org-modern-hide-stars)
  (add-hook 'writeroom-mode-enable-hook #'+zen-prose-org-h)
  (add-hook 'writeroom-mode-disable-hook #'+zen-nonprose-org-h))
Writeroom applied to an Org file

3.4.16. Treemacs

From the :ui treemacs module.

Quite often there are superfluous files I’m not that interested in. There’s no good reason for them to take up space. Let’s add a mechanism to ignore them.

Emacs Lisp
#
(after! treemacs
  (defvar treemacs-file-ignore-extensions '()
    "File extension which `treemacs-ignore-filter' will ensure are ignored")
  (defvar treemacs-file-ignore-globs '()
    "Globs which will are transformed to `treemacs-file-ignore-regexps' which `treemacs-ignore-filter' will ensure are ignored")
  (defvar treemacs-file-ignore-regexps '()
    "RegExps to be tested to ignore files, generated from `treeemacs-file-ignore-globs'")
  (defun treemacs-file-ignore-generate-regexps ()
    "Generate `treemacs-file-ignore-regexps' from `treemacs-file-ignore-globs'"
    (setq treemacs-file-ignore-regexps (mapcar 'dired-glob-regexp treemacs-file-ignore-globs)))
  (if (equal treemacs-file-ignore-globs '()) nil (treemacs-file-ignore-generate-regexps))
  (defun treemacs-ignore-filter (file full-path)
    "Ignore files specified by `treemacs-file-ignore-extensions', and `treemacs-file-ignore-regexps'"
    (or (member (file-name-extension file) treemacs-file-ignore-extensions)
        (let ((ignore-file nil))
          (dolist (regexp treemacs-file-ignore-regexps ignore-file)
            (setq ignore-file (or ignore-file (if (string-match-p regexp full-path) t nil)))))))
  (add-to-list 'treemacs-ignored-file-predicates #'treemacs-ignore-filter))

Now, we just identify the files in question.

Emacs Lisp
#
(setq treemacs-file-ignore-extensions
      '(;; LaTeX
        "aux"
        "ptc"
        "fdb_latexmk"
        "fls"
        "synctex.gz"
        "toc"
        ;; LaTeX - glossary
        "glg"
        "glo"
        "gls"
        "glsdefs"
        "ist"
        "acn"
        "acr"
        "alg"
        ;; LaTeX - pgfplots
        "mw"
        ;; LaTeX - pdfx
        "pdfa.xmpi"
        ))
(setq treemacs-file-ignore-globs
      '(;; LaTeX
        "*/_minted-*"
        ;; AucTeX
        "*/.auctex-auto"
        "*/_region_.log"
        "*/_region_.tex"))

3.5. Frivolities

3.5.1. xkcd

XKCD comics are fun.

Emacs Lisp
#
(package! xkcd :pin "80011da2e7def8f65233d4e0d790ca60d287081d")

We want to set this up so it loads nicely in Extra links.

Emacs Lisp
#
(use-package! xkcd
  :commands (xkcd-get-json
             xkcd-download xkcd-get
             ;; now for funcs from my extension of this pkg
             +xkcd-find-and-copy +xkcd-find-and-view
             +xkcd-fetch-info +xkcd-select)
  :config
  (setq xkcd-cache-dir (expand-file-name "xkcd/" doom-cache-dir)
        xkcd-cache-latest (concat xkcd-cache-dir "latest"))
  (unless (file-exists-p xkcd-cache-dir)
    (make-directory xkcd-cache-dir))
  (after! evil-snipe
    (add-to-list 'evil-snipe-disabled-modes 'xkcd-mode))
  :general (:states 'normal
            :keymaps 'xkcd-mode-map
            "<right>" #'xkcd-next
            "n"       #'xkcd-next ; evil-ish
            "<left>"  #'xkcd-prev
            "N"       #'xkcd-prev ; evil-ish
            "r"       #'xkcd-rand
            "a"       #'xkcd-rand ; because image-rotate can interfere
            "t"       #'xkcd-alt-text
            "q"       #'xkcd-kill-buffer
            "o"       #'xkcd-open-browser
            "e"       #'xkcd-open-explanation-browser
            ;; extras
            "s"       #'+xkcd-find-and-view
            "/"       #'+xkcd-find-and-view
            "y"       #'+xkcd-copy))

Let’s also extend the functionality a whole bunch.

Emacs Lisp
#
(after! xkcd
  (require 'emacsql-sqlite)

  (defun +xkcd-select ()
    "Prompt the user for an xkcd using `completing-read' and `+xkcd-select-format'. Return the xkcd number or nil"
    (let* (prompt-lines
           (-dummy (maphash (lambda (key xkcd-info)
                              (push (+xkcd-select-format xkcd-info) prompt-lines))
                            +xkcd-stored-info))
           (num (completing-read (format "xkcd (%s): " xkcd-latest) prompt-lines)))
      (if (equal "" num) xkcd-latest
        (string-to-number (replace-regexp-in-string "\\([0-9]+\\).*" "\\1" num)))))

  (defun +xkcd-select-format (xkcd-info)
    "Creates each completing-read line from an xkcd info plist. Must start with the xkcd number"
    (format "%-4s  %-30s %s"
            (propertize (number-to-string (plist-get xkcd-info :num))
                        'face 'counsel-key-binding)
            (plist-get xkcd-info :title)
            (propertize (plist-get xkcd-info :alt)
                        'face '(variable-pitch font-lock-comment-face))))

  (defun +xkcd-fetch-info (&optional num)
    "Fetch the parsed json info for comic NUM. Fetches latest when omitted or 0"
    (require 'xkcd)
    (when (or (not num) (= num 0))
      (+xkcd-check-latest)
      (setq num xkcd-latest))
    (let ((res (or (gethash num +xkcd-stored-info)
                   (puthash num (+xkcd-db-read num) +xkcd-stored-info))))
      (unless res
        (+xkcd-db-write
         (let* ((url (format "https://xkcd.com/%d/info.0.json" num))
                (json-assoc
                 (if (gethash num +xkcd-stored-info)
                     (gethash num +xkcd-stored-info)
                   (json-read-from-string (xkcd-get-json url num)))))
           json-assoc))
        (setq res (+xkcd-db-read num)))
      res))

  ;; since we've done this, we may as well go one little step further
  (defun +xkcd-find-and-copy ()
    "Prompt for an xkcd using `+xkcd-select' and copy url to clipboard"
    (interactive)
    (+xkcd-copy (+xkcd-select)))

  (defun +xkcd-copy (&optional num)
    "Copy a url to xkcd NUM to the clipboard"
    (interactive "i")
    (let ((num (or num xkcd-cur)))
      (gui-select-text (format "https://xkcd.com/%d" num))
      (message "xkcd.com/%d copied to clipboard" num)))

  (defun +xkcd-find-and-view ()
    "Prompt for an xkcd using `+xkcd-select' and view it"
    (interactive)
    (xkcd-get (+xkcd-select))
    (switch-to-buffer "*xkcd*"))

  (defvar +xkcd-latest-max-age (* 60 60) ; 1 hour
    "Time after which xkcd-latest should be refreshed, in seconds")

  ;; initialise `xkcd-latest' and `+xkcd-stored-info' with latest xkcd
  (add-transient-hook! '+xkcd-select
    (require 'xkcd)
    (+xkcd-fetch-info xkcd-latest)
    (setq +xkcd-stored-info (+xkcd-db-read-all)))

  (add-transient-hook! '+xkcd-fetch-info
    (xkcd-update-latest))

  (defun +xkcd-check-latest ()
    "Use value in `xkcd-cache-latest' as long as it isn't older thabn `+xkcd-latest-max-age'"
    (unless (and (file-exists-p xkcd-cache-latest)
                 (< (- (time-to-seconds (current-time))
                       (time-to-seconds (file-attribute-modification-time (file-attributes xkcd-cache-latest))))
                    +xkcd-latest-max-age))
      (let* ((out (xkcd-get-json "http://xkcd.com/info.0.json" 0))
             (json-assoc (json-read-from-string out))
             (latest (cdr (assoc 'num json-assoc))))
        (when (/= xkcd-latest latest)
          (+xkcd-db-write json-assoc)
          (with-current-buffer (find-file xkcd-cache-latest)
            (setq xkcd-latest latest)
            (erase-buffer)
            (insert (number-to-string latest))
            (save-buffer)
            (kill-buffer (current-buffer)))))
      (shell-command (format "touch %s" xkcd-cache-latest))))

  (defvar +xkcd-stored-info (make-hash-table :test 'eql)
    "Basic info on downloaded xkcds, in the form of a hashtable")

  (defadvice! xkcd-get-json--and-cache (url &optional num)
    "Fetch the Json coming from URL.
If the file NUM.json exists, use it instead.
If NUM is 0, always download from URL.
The return value is a string."
    :override #'xkcd-get-json
    (let* ((file (format "%s%d.json" xkcd-cache-dir num))
           (cached (and (file-exists-p file) (not (eq num 0))))
           (out (with-current-buffer (if cached
                                         (find-file file)
                                       (url-retrieve-synchronously url))
                  (goto-char (point-min))
                  (unless cached (re-search-forward "^$"))
                  (prog1
                      (buffer-substring-no-properties (point) (point-max))
                    (kill-buffer (current-buffer))))))
      (unless (or cached (eq num 0))
        (xkcd-cache-json num out))
      out))

  (defadvice! +xkcd-get (num)
    "Get the xkcd number NUM."
    :override 'xkcd-get
    (interactive "nEnter comic number: ")
    (xkcd-update-latest)
    (get-buffer-create "*xkcd*")
    (switch-to-buffer "*xkcd*")
    (xkcd-mode)
    (let (buffer-read-only)
      (erase-buffer)
      (setq xkcd-cur num)
      (let* ((xkcd-data (+xkcd-fetch-info num))
             (num (plist-get xkcd-data :num))
             (img (plist-get xkcd-data :img))
             (safe-title (plist-get xkcd-data :safe-title))
             (alt (plist-get xkcd-data :alt))
             title file)
        (message "Getting comic...")
        (setq file (xkcd-download img num))
        (setq title (format "%d: %s" num safe-title))
        (insert (propertize title
                            'face 'outline-1))
        (center-line)
        (insert "\n")
        (xkcd-insert-image file num)
        (if (eq xkcd-cur 0)
            (setq xkcd-cur num))
        (setq xkcd-alt alt)
        (message "%s" title))))

  (defconst +xkcd-db--sqlite-available-p
    (with-demoted-errors "+org-xkcd initialization: %S"
      (emacsql-sqlite-ensure-binary)
      t))

  (defvar +xkcd-db--connection (make-hash-table :test #'equal)
    "Database connection to +org-xkcd database.")

  (defun +xkcd-db--get ()
    "Return the sqlite db file."
    (expand-file-name "xkcd.db" xkcd-cache-dir))

  (defun +xkcd-db--get-connection ()
    "Return the database connection, if any."
    (gethash (file-truename xkcd-cache-dir)
             +xkcd-db--connection))

  (defconst +xkcd-db--table-schema
    '((xkcds
       [(num integer :unique :primary-key)
        (year        :not-null)
        (month       :not-null)
        (link        :not-null)
        (news        :not-null)
        (safe_title  :not-null)
        (title       :not-null)
        (transcript  :not-null)
        (alt         :not-null)
        (img         :not-null)])))

  (defun +xkcd-db--init (db)
    "Initialize database DB with the correct schema and user version."
    (emacsql-with-transaction db
      (pcase-dolist (`(,table . ,schema) +xkcd-db--table-schema)
        (emacsql db [:create-table $i1 $S2] table schema))))

  (defun +xkcd-db ()
    "Entrypoint to the +org-xkcd sqlite database.
Initializes and stores the database, and the database connection.
Performs a database upgrade when required."
    (unless (and (+xkcd-db--get-connection)
                 (emacsql-live-p (+xkcd-db--get-connection)))
      (let* ((db-file (+xkcd-db--get))
             (init-db (not (file-exists-p db-file))))
        (make-directory (file-name-directory db-file) t)
        (let ((conn (emacsql-sqlite db-file)))
          (set-process-query-on-exit-flag (emacsql-process conn) nil)
          (puthash (file-truename xkcd-cache-dir)
                   conn
                   +xkcd-db--connection)
          (when init-db
            (+xkcd-db--init conn)))))
    (+xkcd-db--get-connection))

  (defun +xkcd-db-query (sql &rest args)
    "Run SQL query on +org-xkcd database with ARGS.
SQL can be either the emacsql vector representation, or a string."
    (if  (stringp sql)
        (emacsql (+xkcd-db) (apply #'format sql args))
      (apply #'emacsql (+xkcd-db) sql args)))

  (defun +xkcd-db-read (num)
    (when-let ((res
                (car (+xkcd-db-query [:select * :from xkcds
                                      :where (= num $s1)]
                                     num
                                     :limit 1))))
      (+xkcd-db-list-to-plist res)))

  (defun +xkcd-db-read-all ()
    (let ((xkcd-table (make-hash-table :test 'eql :size 4000)))
      (mapcar (lambda (xkcd-info-list)
                (puthash (car xkcd-info-list) (+xkcd-db-list-to-plist xkcd-info-list) xkcd-table))
              (+xkcd-db-query [:select * :from xkcds]))
      xkcd-table))

  (defun +xkcd-db-list-to-plist (xkcd-datalist)
    `(:num ,(nth 0 xkcd-datalist)
      :year ,(nth 1 xkcd-datalist)
      :month ,(nth 2 xkcd-datalist)
      :link ,(nth 3 xkcd-datalist)
      :news ,(nth 4 xkcd-datalist)
      :safe-title ,(nth 5 xkcd-datalist)
      :title ,(nth 6 xkcd-datalist)
      :transcript ,(nth 7 xkcd-datalist)
      :alt ,(nth 8 xkcd-datalist)
      :img ,(nth 9 xkcd-datalist)))

  (defun +xkcd-db-write (data)
    (+xkcd-db-query [:insert-into xkcds
                     :values $v1]
                    (list (vector
                           (cdr (assoc 'num        data))
                           (cdr (assoc 'year       data))
                           (cdr (assoc 'month      data))
                           (cdr (assoc 'link       data))
                           (cdr (assoc 'news       data))
                           (cdr (assoc 'safe_title data))
                           (cdr (assoc 'title      data))
                           (cdr (assoc 'transcript data))
                           (cdr (assoc 'alt        data))
                           (cdr (assoc 'img        data))
                           )))))

3.5.2. Selectric

Every so often, you want everyone else to know that you’re typing, or just to amuse oneself. Introducing: typewriter sounds!

Emacs Lisp
#
(package! selectric-mode :pin "1840de71f7414b7cd6ce425747c8e26a413233aa")
Emacs Lisp
#
(use-package! selectic-mode
  :commands selectic-mode)

3.5.3. Wttrin

Hey, let’s get the weather in here while we’re at it. Unfortunately this seems slightly unmaintained (few open bugfix PRs) so let’s roll our own version.

Emacs Lisp
#
(package! wttrin :recipe (:local-repo "lisp/wttrin"))
Emacs Lisp
#
(use-package! wttrin
  :commands wttrin)

3.5.4. Spray

Why not flash words on the screen. Why not — hey, it could be fun.

Emacs Lisp
#
(package! spray :pin "74d9dcfa2e8b38f96a43de9ab0eb13364300cb46")

It would be nice if Spray’s default speed suited me better, and the keybindings worked in evil mode. Let’s do that and make the display slightly nicer while we’re at it.

Emacs Lisp
#
(use-package! spray
  :commands spray-mode
  :config
  (setq spray-wpm 600
        spray-height 800)
  (defun spray-mode-hide-cursor ()
    "Hide or unhide the cursor as is appropriate."
    (if spray-mode
        (setq-local spray--last-evil-cursor-state evil-normal-state-cursor
                    evil-normal-state-cursor '(nil))
      (setq-local evil-normal-state-cursor spray--last-evil-cursor-state)))
  (add-hook 'spray-mode-hook #'spray-mode-hide-cursor)
  (map! :map spray-mode-map
        "<return>" #'spray-start/stop
        "f" #'spray-faster
        "s" #'spray-slower
        "t" #'spray-time
        "<right>" #'spray-forward-word
        "h" #'spray-forward-word
        "<left>" #'spray-backward-word
        "l" #'spray-backward-word
        "q" #'spray-quit))

3.5.5. Elcord

What’s even the point of using Emacs unless you’re constantly telling everyone about it?

Emacs Lisp
#
(package! elcord :pin "d0c9ace493d088bc70f7422705ff27dfcf162cca")
Emacs Lisp
#
(use-package! elcord
  :commands elcord-mode
  :config
  (setq elcord-use-major-mode-as-main-icon t))

3.6. File types

3.6.1. Systemd

For editing systemd unit files

Emacs Lisp
#
(package! systemd :pin "b6ae63a236605b1c5e1069f7d3afe06ae32a7bae")
Emacs Lisp
#
(use-package! systemd
  :defer t)

3.6.2. Ein (Ipython)

For editing Jupyter files

Emacs Lisp
#
(package! ein)

3.6.3. Cmake

For editing cmake files

Emacs Lisp
#
(package! cmake-mode)
(package! cmake-ide)

3.6.4. Cuda

For editing cuda files

Emacs Lisp
#
(package! cuda-mode)

3.6.5. Clang format

For automatic clang formatting

Emacs Lisp
#
(package! clang-format)
Emacs Lisp
#
(use-package! clang-format
  :init
  (defun clang-format-save-hook-for-this-buffer ()
"Create a buffer local save hook."
  (add-hook 'before-save-hook
    (lambda ()
      (progn
        (when (locate-dominating-file "." ".clang-format")
          (clang-format-buffer))
        ;; Continue to save.
        nil))
    nil
    ;; Buffer local hook.
    t))
;; Run this for each mode you want to use the hook.
(add-hook 'c-mode-hook (lambda () (clang-format-save-hook-for-this-buffer)))
(add-hook 'c++-mode-hook (lambda () (clang-format-save-hook-for-this-buffer)))
(add-hook 'cuda-mode-hook (lambda () (clang-format-save-hook-for-this-buffer))))

3.6.6. Gtags

For creating GTAGS with global

Emacs Lisp
#
(package! ggtags)
Emacs Lisp
#
(package! rtags)
Emacs Lisp
#
(package! company-rtags)

3.6.7. Clang extra

For auto-completion with clang

Emacs Lisp
#
(package! clang-capf)
Emacs Lisp
#
(package! irony)

Add it to the modes you need

Emacs Lisp
#
(add-hook 'c++-mode-hook 'irony-mode)
(add-hook 'c-mode-hook 'irony-mode)
(add-hook 'objc-mode-hook 'irony-mode)
(add-hook 'irony-mode-hook 'irony-cdb-autosetup-compile-options)

4. Applications

4.1. Ebooks

Kindle

For managing my ebooks, I’ll hook into the well-established ebook library manager calibre. A number of Emacs clients for this exist, but this seems like a good option.

Emacs Lisp
#
(package! calibredb :pin "2f2cfc38f2d1c705134b692127c3008ac1382482")

Then for reading them, the only currently viable options seems to be nov.el.

Emacs Lisp
#
(package! nov :pin "cb5f45cbcfbcf263cdeb2d263eb15edefc8b07cb")

Together these should give me a rather good experience reading ebooks.

calibredb lets us use calibre through Emacs, because who wouldn’t want to use something through Emacs?

Emacs Lisp
#
(use-package! calibredb
  :commands calibredb
  :config
  (setq calibredb-root-dir "~/Desktop/TEC/Other/Ebooks"
        calibredb-db-dir (expand-file-name "metadata.db" calibredb-root-dir))
  (map! :map calibredb-show-mode-map
        :ne "?" #'calibredb-entry-dispatch
        :ne "o" #'calibredb-find-file
        :ne "O" #'calibredb-find-file-other-frame
        :ne "V" #'calibredb-open-file-with-default-tool
        :ne "s" #'calibredb-set-metadata-dispatch
        :ne "e" #'calibredb-export-dispatch
        :ne "q" #'calibredb-entry-quit
        :ne "." #'calibredb-open-dired
        :ne [tab] #'calibredb-toggle-view-at-point
        :ne "M-t" #'calibredb-set-metadata--tags
        :ne "M-a" #'calibredb-set-metadata--author_sort
        :ne "M-A" #'calibredb-set-metadata--authors
        :ne "M-T" #'calibredb-set-metadata--title
        :ne "M-c" #'calibredb-set-metadata--comments)
  (map! :map calibredb-search-mode-map
        :ne [mouse-3] #'calibredb-search-mouse
        :ne "RET" #'calibredb-find-file
        :ne "?" #'calibredb-dispatch
        :ne "a" #'calibredb-add
        :ne "A" #'calibredb-add-dir
        :ne "c" #'calibredb-clone
        :ne "d" #'calibredb-remove
        :ne "D" #'calibredb-remove-marked-items
        :ne "j" #'calibredb-next-entry
        :ne "k" #'calibredb-previous-entry
        :ne "l" #'calibredb-virtual-library-list
        :ne "L" #'calibredb-library-list
        :ne "n" #'calibredb-virtual-library-next
        :ne "N" #'calibredb-library-next
        :ne "p" #'calibredb-virtual-library-previous
        :ne "P" #'calibredb-library-previous
        :ne "s" #'calibredb-set-metadata-dispatch
        :ne "S" #'calibredb-switch-library
        :ne "o" #'calibredb-find-file
        :ne "O" #'calibredb-find-file-other-frame
        :ne "v" #'calibredb-view
        :ne "V" #'calibredb-open-file-with-default-tool
        :ne "." #'calibredb-open-dired
        :ne "b" #'calibredb-catalog-bib-dispatch
        :ne "e" #'calibredb-export-dispatch
        :ne "r" #'calibredb-search-refresh-and-clear-filter
        :ne "R" #'calibredb-search-clear-filter
        :ne "q" #'calibredb-search-quit
        :ne "m" #'calibredb-mark-and-forward
        :ne "f" #'calibredb-toggle-favorite-at-point
        :ne "x" #'calibredb-toggle-archive-at-point
        :ne "h" #'calibredb-toggle-highlight-at-point
        :ne "u" #'calibredb-unmark-and-forward
        :ne "i" #'calibredb-edit-annotation
        :ne "DEL" #'calibredb-unmark-and-backward
        :ne [backtab] #'calibredb-toggle-view
        :ne [tab] #'calibredb-toggle-view-at-point
        :ne "M-n" #'calibredb-show-next-entry
        :ne "M-p" #'calibredb-show-previous-entry
        :ne "/" #'calibredb-search-live-filter
        :ne "M-t" #'calibredb-set-metadata--tags
        :ne "M-a" #'calibredb-set-metadata--author_sort
        :ne "M-A" #'calibredb-set-metadata--authors
        :ne "M-T" #'calibredb-set-metadata--title
        :ne "M-c" #'calibredb-set-metadata--comments))

Then, to actually read the ebooks we use nov.

Excerpt of the GNU Emacs manual viewed through nov.el
Emacs Lisp
#
(use-package! nov
  :mode ("\\.epub\\'" . nov-mode)
  :config
  (map! :map nov-mode-map
        :n "RET" #'nov-scroll-up)

  (defun doom-modeline-segment--nov-info ()
    (concat
     " "
     (propertize
      (cdr (assoc 'creator nov-metadata))
      'face 'doom-modeline-project-parent-dir)
     " "
     (cdr (assoc 'title nov-metadata))
     " "
     (propertize
      (format "%d/%d"
              (1+ nov-documents-index)
              (length nov-documents))
      'face 'doom-modeline-info)))

  (advice-add 'nov-render-title :override #'ignore)

  (defun +nov-mode-setup ()
    "Tweak nov-mode to our liking."
    (face-remap-add-relative 'variable-pitch
                             :family "Merriweather"
                             :height 1.4
                             :width 'semi-expanded)
    (face-remap-add-relative 'default :height 1.3)
    (setq-local line-spacing 0.2
                next-screen-context-lines 4
                shr-use-colors nil)
    (require 'visual-fill-column nil t)
    (setq-local visual-fill-column-center-text t
                visual-fill-column-width 81
                nov-text-width 80)
    (visual-fill-column-mode 1)
    (hl-line-mode -1)
    ;; Re-render with new display settings
    (nov-render-document)
    ;; Look up words with the dictionary.
    (add-to-list '+lookup-definition-functions #'+lookup/dictionary-definition)
    ;; Customise the mode-line to make it more minimal and relevant.
    (setq-local
     mode-line-format
     `((:eval
        (doom-modeline-segment--workspace-name))
       (:eval
        (doom-modeline-segment--window-number))
       (:eval
        (doom-modeline-segment--nov-info))
       ,(propertize
         " %P "
         'face 'doom-modeline-buffer-minor-mode)
       ,(propertize
         " "
         'face (if (doom-modeline--active) 'mode-line 'mode-line-inactive)
         'display `((space
                     :align-to
                     (- (+ right right-fringe right-margin)
                        ,(* (let ((width (doom-modeline--font-width)))
                              (or (and (= width 1) 1)
                                  (/ width (frame-char-width) 1.0)))
                            (string-width
                             (format-mode-line (cons "" '(:eval (doom-modeline-segment--major-mode))))))))))
       (:eval (doom-modeline-segment--major-mode)))))

  (add-hook 'nov-mode-hook #'+nov-mode-setup))

4.2. Calculator

Emacs includes the venerable calc, which is a pretty impressive RPN (Reverse Polish Notation) calculator. However, we can do a bit to improve the experience.

4.2.1. CalcTeX

Everybody knows that mathematical expressions look best with LaTeX, so calc’s ability to create LaTeX representations of its expressions provides a lovely opportunity which is taken advantage of in the CalcTeX package.

Emacs Lisp
#
(package! calctex :recipe (:host github :repo "johnbcoughlin/calctex"
                           :files ("*.el" "calctex/*.el" "calctex-contrib/*.el" "org-calctex/*.el" "vendor"))
  :pin "67a2e76847a9ea9eff1f8e4eb37607f84b380ebb")
Demonstration of calc, prettified by calctex.

We’d like to use CalcTeX too, so let’s set that up, and fix some glaring inadequacies — why on earth would you commit a hard-coded path to an executable that only works on your local machine, consequently breaking the package for everyone else!?

Emacs Lisp
#
(use-package! calctex
  :commands calctex-mode
  :init
  (add-hook 'calc-mode-hook #'calctex-mode)
  :config
  (setq calctex-additional-latex-packages "
\\usepackage[usenames]{xcolor}
\\usepackage{soul}
\\usepackage{adjustbox}
\\usepackage{amsmath}
\\usepackage{amssymb}
\\usepackage{siunitx}
\\usepackage{cancel}
\\usepackage{mathtools}
\\usepackage{mathalpha}
\\usepackage{xparse}
\\usepackage{arevmath}"
        calctex-additional-latex-macros
        (concat calctex-additional-latex-macros
                "\n\\let\\evalto\\Rightarrow"))
  (defadvice! no-messaging-a (orig-fn &rest args)
    :around #'calctex-default-dispatching-render-process
    (let ((inhibit-message t) message-log-max)
      (apply orig-fn args)))
  ;; Fix hardcoded dvichop path (whyyyyyyy)
  (let ((vendor-folder (concat (file-truename doom-local-dir)
                               "straight/"
                               (format "build-%s" emacs-version)
                               "/calctex/vendor/")))
    (setq calctex-dvichop-sty (concat vendor-folder "texd/dvichop")
          calctex-dvichop-bin (concat vendor-folder "texd/dvichop")))
  (unless (file-exists-p calctex-dvichop-bin)
    (message "CalcTeX: Building dvichop binary")
    (let ((default-directory (file-name-directory calctex-dvichop-bin)))
      (call-process "make" nil nil nil))))

4.2.2. Defaults

Any sane person prefers radians and exact values.

Emacs Lisp
#
(setq calc-angle-mode 'rad  ; radians are rad
      calc-symbolic-mode t) ; keeps expressions like \sqrt{2} irrational for as long as possible

4.2.3. Embedded calc

Embedded calc is a lovely feature which let’s us use calc to operate on LaTeX maths expressions. The standard keybinding is a bit janky however (C-x * e), so we’ll add a localleader-based alternative.

Emacs Lisp
#
(map! :map calc-mode-map
      :after calc
      :localleader
      :desc "Embedded calc (toggle)" "e" #'calc-embedded)
(map! :map org-mode-map
      :after org
      :localleader
      :desc "Embedded calc (toggle)" "E" #'calc-embedded)
(map! :map latex-mode-map
      :after latex
      :localleader
      :desc "Embedded calc (toggle)" "e" #'calc-embedded)

Unfortunately this operates without the (rather informative) calculator and trail buffers, but we can advice it that we would rather like those in a side panel.

Emacs Lisp
#
(defvar calc-embedded-trail-window nil)
(defvar calc-embedded-calculator-window nil)

(defadvice! calc-embedded-with-side-pannel (&rest _)
  :after #'calc-do-embedded
  (when calc-embedded-trail-window
    (ignore-errors
      (delete-window calc-embedded-trail-window))
    (setq calc-embedded-trail-window nil))
  (when calc-embedded-calculator-window
    (ignore-errors
      (delete-window calc-embedded-calculator-window))
    (setq calc-embedded-calculator-window nil))
  (when (and calc-embedded-info
             (> (* (window-width) (window-height)) 1200))
    (let ((main-window (selected-window))
          (vertical-p (> (window-width) 80)))
      (select-window
       (setq calc-embedded-trail-window
             (if vertical-p
                 (split-window-horizontally (- (max 30 (/ (window-width) 3))))
               (split-window-vertically (- (max 8 (/ (window-height) 4)))))))
      (switch-to-buffer "*Calc Trail*")
      (select-window
       (setq calc-embedded-calculator-window
             (if vertical-p
                 (split-window-vertically -6)
               (split-window-horizontally (- (/ (window-width) 2))))))
      (switch-to-buffer "*Calculator*")
      (select-window main-window))))

4.3. IRC

circe is a client for IRC in Emacs (hey, isn’t that a nice project name+acronym), and a greek enchantress who turned humans into animals.

Let’s use the former to chat to recluses discerning individuals online.

Team Chat

Before we start seeing and sending messages, we need to authenticate with our IRC servers. The circe manual provided a snippet for putting some of the auth details in .authinfo.gpg — but I think we should go further than that: have the entire server info in our authinfo.

First, a reasonable format by which we can specify:

  • server
  • port
  • SASL username
  • SASL password
  • channels to join

We can have these stored like so

authinfo
#
machine chat.freenode.net login USERNAME password PASSWORD port PORT for irc channels emacs,org-mode

The for irc bit is used so we can uniquely identify all IRC auth info. By omitting the # in channel names we can have a list of channels comma-separated (no space!) which the secrets API will return as a single string.

irc-authinfo-readerEmacs Lisp
#
(defun auth-server-pass (server)
  (if-let ((secret (plist-get (car (auth-source-search :host server)) :secret)))
      (if (functionp secret)
          (funcall secret) secret)
    (error "Could not fetch password for host %s" server)))

(defun register-irc-auths ()
  (require 'circe)
  (require 'dash)
  (let ((accounts (-filter (lambda (a) (string= "irc" (plist-get a :for)))
                           (auth-source-search :require '(:for) :max 10))))
    (appendq! circe-network-options
              (mapcar (lambda (entry)
                        (let* ((host (plist-get entry :host))
                               (label (or (plist-get entry :label) host))
                               (_ports (mapcar #'string-to-number
                                               (s-split "," (plist-get entry :port))))
                               (port (if (= 1 (length _ports)) (car _ports) _ports))
                               (user (plist-get entry :user))
                               (nick (or (plist-get entry :nick) user))
                               (channels (mapcar (lambda (c) (concat "#" c))
                                                 (s-split "," (plist-get entry :channels)))))
                          `(,label
                            :host ,host :port ,port :nick ,nick
                            :sasl-username ,user :sasl-password auth-server-pass
                            :channels ,channels)))
                      accounts))))

We’ll just call (register-irc-auths) on a hook when we start Circe up.

Now we’re ready to go, let’s actually wire-up Circe, with one or two configuration tweaks.

Emacs Lisp
#
(after! circe
  (setq-default circe-use-tls t)
  (setq circe-notifications-alert-icon "/usr/share/icons/breeze/actions/24/network-connect.svg"
        lui-logging-directory (expand-file-name "irc" doom-etc-dir)
        lui-logging-file-format "{buffer}/%Y/%m-%d.txt"
        circe-format-self-say "{nick:+13s} ┃ {body}")

  (custom-set-faces!
    '(circe-my-message-face :weight unspecified))

  (enable-lui-logging-globally)
  (enable-circe-display-images)

  <<org-emph-to-irc>>

  <<circe-emojis>>
  <<circe-emoji-alists>>

  (defun named-circe-prompt ()
    (lui-set-prompt
     (concat (propertize (format "%13s > " (circe-nick))
                         'face 'circe-prompt-face)
             "")))
  (add-hook 'circe-chat-mode-hook #'named-circe-prompt)

  (appendq! all-the-icons-mode-icon-alist
            '((circe-channel-mode all-the-icons-material "message" :face all-the-icons-lblue)
              (circe-server-mode all-the-icons-material "chat_bubble_outline" :face all-the-icons-purple))))

<<irc-authinfo-reader>>

(add-transient-hook! #'=irc (register-irc-auths))

4.3.1. Org-style emphasis

Let’s do our bold, italic, and underline in org-syntax, using IRC control characters.

org-emph-to-ircEmacs Lisp
#
(defun lui-org-to-irc ()
  "Examine a buffer with simple org-mode formatting, and converts the empasis:
*bold*, /italic/, and _underline_ to IRC semi-standard escape codes.
=code= is converted to inverse (highlighted) text."
  (goto-char (point-min))
  (while (re-search-forward "\\_<\\(?1:[*/_=]\\)\\(?2:[^[:space:]]\\(?:.*?[^[:space:]]\\)?\\)\\1\\_>" nil t)
    (replace-match
     (concat (pcase (match-string 1)
               ("*" "")
               ("/" "")
               ("_" "")
               ("=" ""))
             (match-string 2)
             "") nil nil)))

(add-hook 'lui-pre-input-hook #'lui-org-to-irc)

4.3.2. Emojis

Let’s setup Circe to use some emojis

circe-emojisEmacs Lisp
#
(defun lui-ascii-to-emoji ()
  (goto-char (point-min))
  (while (re-search-forward "\\( \\)?::?\\([^[:space:]:]+\\):\\( \\)?" nil t)
    (replace-match
     (concat
      (match-string 1)
      (or (cdr (assoc (match-string 2) lui-emojis-alist))
          (concat ":" (match-string 2) ":"))
      (match-string 3))
     nil nil)))

(defun lui-emoticon-to-emoji ()
  (dolist (emoticon lui-emoticons-alist)
    (goto-char (point-min))
    (while (re-search-forward (concat " " (car emoticon) "\\( \\)?") nil t)
      (replace-match (concat " "
                             (cdr (assoc (cdr emoticon) lui-emojis-alist))
                             (match-string 1))))))

(define-minor-mode lui-emojify
  "Replace :emojis: and ;) emoticons with unicode emoji chars."
  :global t
  :init-value t
  (if lui-emojify
      (add-hook! lui-pre-input #'lui-ascii-to-emoji #'lui-emoticon-to-emoji)
    (remove-hook! lui-pre-input #'lui-ascii-to-emoji #'lui-emoticon-to-emoji)))

Now, some actual emojis to use.

circe-emoji-alistsEmacs Lisp
#
(defvar lui-emojis-alist
  '(("grinning"                      . "😀")
    ("smiley"                        . "😃")
    ("smile"                         . "😄")
    ("grin"                          . "😁")
    ("laughing"                      . "😆")
    ("sweat_smile"                   . "😅")
    ("joy"                           . "😂")
    ("rofl"                          . "🤣")
    ("relaxed"                       . "☺️")
    ("blush"                         . "😊")
    ("innocent"                      . "😇")
    ("slight_smile"                  . "🙂")
    ("upside_down"                   . "🙃")
    ("wink"                          . "😉")
    ("relieved"                      . "😌")
    ("heart_eyes"                    . "😍")
    ("yum"                           . "😋")
    ("stuck_out_tongue"              . "😛")
    ("stuck_out_tongue_closed_eyes"  . "😝")
    ("stuck_out_tongue_wink"         . "😜")
    ("zanzy"                         . "🤪")
    ("raised_eyebrow"                . "🤨")
    ("monocle"                       . "🧐")
    ("nerd"                          . "🤓")
    ("cool"                          . "😎")
    ("star_struck"                   . "🤩")
    ("party"                         . "🥳")
    ("smirk"                         . "😏")
    ("unamused"                      . "😒")
    ("disapointed"                   . "😞")
    ("pensive"                       . "😔")
    ("worried"                       . "😟")
    ("confused"                      . "😕")
    ("slight_frown"                  . "🙁")
    ("frown"                         . "☹️")
    ("persevere"                     . "😣")
    ("confounded"                    . "😖")
    ("tired"                         . "😫")
    ("weary"                         . "😩")
    ("pleading"                      . "🥺")
    ("tear"                          . "😢")
    ("cry"                           . "😢")
    ("sob"                           . "😭")
    ("triumph"                       . "😤")
    ("angry"                         . "😠")
    ("rage"                          . "😡")
    ("exploding_head"                . "🤯")
    ("flushed"                       . "😳")
    ("hot"                           . "🥵")
    ("cold"                          . "🥶")
    ("scream"                        . "😱")
    ("fearful"                       . "😨")
    ("disapointed"                   . "😰")
    ("relieved"                      . "😥")
    ("sweat"                         . "😓")
    ("thinking"                      . "🤔")
    ("shush"                         . "🤫")
    ("liar"                          . "🤥")
    ("blank_face"                    . "😶")
    ("neutral"                       . "😐")
    ("expressionless"                . "😑")
    ("grimace"                       . "😬")
    ("rolling_eyes"                  . "🙄")
    ("hushed"                        . "😯")
    ("frowning"                      . "😦")
    ("anguished"                     . "😧")
    ("wow"                           . "😮")
    ("astonished"                    . "😲")
    ("sleeping"                      . "😴")
    ("drooling"                      . "🤤")
    ("sleepy"                        . "😪")
    ("dizzy"                         . "😵")
    ("zipper_mouth"                  . "🤐")
    ("woozy"                         . "🥴")
    ("sick"                          . "🤢")
    ("vomiting"                      . "🤮")
    ("sneeze"                        . "🤧")
    ("mask"                          . "😷")
    ("bandaged_head"                 . "🤕")
    ("money_face"                    . "🤑")
    ("cowboy"                        . "🤠")
    ("imp"                           . "😈")
    ("ghost"                         . "👻")
    ("alien"                         . "👽")
    ("robot"                         . "🤖")
    ("clap"                          . "👏")
    ("thumpup"                       . "👍")
    ("+1"                            . "👍")
    ("thumbdown"                     . "👎")
    ("-1"                            . "👎")
    ("ok"                            . "👌")
    ("pinch"                         . "🤏")
    ("left"                          . "👈")
    ("right"                         . "👉")
    ("down"                          . "👇")
    ("wave"                          . "👋")
    ("pray"                          . "🙏")
    ("eyes"                          . "👀")
    ("brain"                         . "🧠")
    ("facepalm"                      . "🤦")
    ("tada"                          . "🎉")
    ("fire"                          . "🔥")
    ("flying_money"                  . "💸")
    ("lighbulb"                      . "💡")
    ("heart"                         . "❤️")
    ("sparkling_heart"               . "💖")
    ("heartbreak"                    . "💔")
    ("100"                           . "💯")))

(defvar lui-emoticons-alist
  '((":)"   . "slight_smile")
    (";)"   . "wink")
    (":D"   . "smile")
    ("=D"   . "grin")
    ("xD"   . "laughing")
    (";("   . "joy")
    (":P"   . "stuck_out_tongue")
    (";D"   . "stuck_out_tongue_wink")
    ("xP"   . "stuck_out_tongue_closed_eyes")
    (":("   . "slight_frown")
    (";("   . "cry")
    (";'("  . "sob")
    (">:("  . "angry")
    (">>:(" . "rage")
    (":o"   . "wow")
    (":O"   . "astonished")
    (":/"   . "confused")
    (":-/"  . "thinking")
    (":|"   . "neutral")
    (":-|"  . "expressionless")))

4.4. Newsfeed

RSS feeds are still a thing. Why not make use of them with elfeed. I really like what fuxialexander has going on, but I don’t think I need a custom module. Let’s just try to patch on the main things I like the look of.

Example elfeed entry

4.4.1. Keybindings

Emacs Lisp
#
(map! :map elfeed-search-mode-map
      :after elfeed-search
      [remap kill-this-buffer] "q"
      [remap kill-buffer] "q"
      :n doom-leader-key nil
      :n "q" #'+rss/quit
      :n "e" #'elfeed-update
      :n "r" #'elfeed-search-untag-all-unread
      :n "u" #'elfeed-search-tag-all-unread
      :n "s" #'elfeed-search-live-filter
      :n "RET" #'elfeed-search-show-entry
      :n "p" #'elfeed-show-pdf
      :n "+" #'elfeed-search-tag-all
      :n "-" #'elfeed-search-untag-all
      :n "S" #'elfeed-search-set-filter
      :n "b" #'elfeed-search-browse-url
      :n "y" #'elfeed-search-yank)
(map! :map elfeed-show-mode-map
      :after elfeed-show
      [remap kill-this-buffer] "q"
      [remap kill-buffer] "q"
      :n doom-leader-key nil
      :nm "q" #'+rss/delete-pane
      :nm "o" #'ace-link-elfeed
      :nm "RET" #'org-ref-elfeed-add
      :nm "n" #'elfeed-show-next
      :nm "N" #'elfeed-show-prev
      :nm "p" #'elfeed-show-pdf
      :nm "+" #'elfeed-show-tag
      :nm "-" #'elfeed-show-untag
      :nm "s" #'elfeed-show-new-live-search
      :nm "y" #'elfeed-show-yank)

4.4.2. Usability enhancements

Emacs Lisp
#
(after! elfeed-search
  (set-evil-initial-state! 'elfeed-search-mode 'normal))
(after! elfeed-show-mode
  (set-evil-initial-state! 'elfeed-show-mode   'normal))

(after! evil-snipe
  (push 'elfeed-show-mode   evil-snipe-disabled-modes)
  (push 'elfeed-search-mode evil-snipe-disabled-modes))

4.4.3. Visual enhancements

Emacs Lisp
#
(after! elfeed

  (elfeed-org)
  (use-package! elfeed-link)

  (setq elfeed-search-filter "@1-week-ago +unread"
        elfeed-search-print-entry-function '+rss/elfeed-search-print-entry
        elfeed-search-title-min-width 80
        elfeed-show-entry-switch #'pop-to-buffer
        elfeed-show-entry-delete #'+rss/delete-pane
        elfeed-show-refresh-function #'+rss/elfeed-show-refresh--better-style
        shr-max-image-proportion 0.6)

  (add-hook! 'elfeed-show-mode-hook (hide-mode-line-mode 1))
  (add-hook! 'elfeed-search-update-hook #'hide-mode-line-mode)

  (defface elfeed-show-title-face '((t (:weight ultrabold :slant italic :height 1.5)))
    "title face in elfeed show buffer"
    :group 'elfeed)
  (defface elfeed-show-author-face `((t (:weight light)))
    "title face in elfeed show buffer"
    :group 'elfeed)
  (set-face-attribute 'elfeed-search-title-face nil
                      :foreground 'nil
                      :weight 'light)

  (defadvice! +rss-elfeed-wrap-h-nicer ()
    "Enhances an elfeed entry's readability by wrapping it to a width of
`fill-column' and centering it with `visual-fill-column-mode'."
    :override #'+rss-elfeed-wrap-h
    (setq-local truncate-lines nil
                shr-width 120
                visual-fill-column-center-text t
                default-text-properties '(line-height 1.1))
    (let ((inhibit-read-only t)
          (inhibit-modification-hooks t))
      (visual-fill-column-mode)
      ;; (setq-local shr-current-font '(:family "Merriweather" :height 1.2))
      (set-buffer-modified-p nil)))

  (defun +rss/elfeed-search-print-entry (entry)
    "Print ENTRY to the buffer."
    (let* ((elfeed-goodies/tag-column-width 40)
           (elfeed-goodies/feed-source-column-width 30)
           (title (or (elfeed-meta entry :title) (elfeed-entry-title entry) ""))
           (title-faces (elfeed-search--faces (elfeed-entry-tags entry)))
           (feed (elfeed-entry-feed entry))
           (feed-title
            (when feed
              (or (elfeed-meta feed :title) (elfeed-feed-title feed))))
           (tags (mapcar #'symbol-name (elfeed-entry-tags entry)))
           (tags-str (concat (mapconcat 'identity tags ",")))
           (title-width (- (window-width) elfeed-goodies/feed-source-column-width
                           elfeed-goodies/tag-column-width 4))

           (tag-column (elfeed-format-column
                        tags-str (elfeed-clamp (length tags-str)
                                               elfeed-goodies/tag-column-width
                                               elfeed-goodies/tag-column-width)
                        :left))
           (feed-column (elfeed-format-column
                         feed-title (elfeed-clamp elfeed-goodies/feed-source-column-width
                                                  elfeed-goodies/feed-source-column-width
                                                  elfeed-goodies/feed-source-column-width)
                         :left)))

      (insert (propertize feed-column 'face 'elfeed-search-feed-face) " ")
      (insert (propertize tag-column 'face 'elfeed-search-tag-face) " ")
      (insert (propertize title 'face title-faces 'kbd-help title))
      (setq-local line-spacing 0.2)))

  (defun +rss/elfeed-show-refresh--better-style ()
    "Update the buffer to match the selected entry, using a mail-style."
    (interactive)
    (let* ((inhibit-read-only t)
           (title (elfeed-entry-title elfeed-show-entry))
           (date (seconds-to-time (elfeed-entry-date elfeed-show-entry)))
           (author (elfeed-meta elfeed-show-entry :author))
           (link (elfeed-entry-link elfeed-show-entry))
           (tags (elfeed-entry-tags elfeed-show-entry))
           (tagsstr (mapconcat #'symbol-name tags ", "))
           (nicedate (format-time-string "%a, %e %b %Y %T %Z" date))
           (content (elfeed-deref (elfeed-entry-content elfeed-show-entry)))
           (type (elfeed-entry-content-type elfeed-show-entry))
           (feed (elfeed-entry-feed elfeed-show-entry))
           (feed-title (elfeed-feed-title feed))
           (base (and feed (elfeed-compute-base (elfeed-feed-url feed)))))
      (erase-buffer)
      (insert "\n")
      (insert (format "%s\n\n" (propertize title 'face 'elfeed-show-title-face)))
      (insert (format "%s\t" (propertize feed-title 'face 'elfeed-search-feed-face)))
      (when (and author elfeed-show-entry-author)
        (insert (format "%s\n" (propertize author 'face 'elfeed-show-author-face))))
      (insert (format "%s\n\n" (propertize nicedate 'face 'elfeed-log-date-face)))
      (when tags
        (insert (format "%s\n"
                        (propertize tagsstr 'face 'elfeed-search-tag-face))))
      ;; (insert (propertize "Link: " 'face 'message-header-name))
      ;; (elfeed-insert-link link link)
      ;; (insert "\n")
      (cl-loop for enclosure in (elfeed-entry-enclosures elfeed-show-entry)
               do (insert (propertize "Enclosure: " 'face 'message-header-name))
               do (elfeed-insert-link (car enclosure))
               do (insert "\n"))
      (insert "\n")
      (if content
          (if (eq type 'html)
              (elfeed-insert-html content base)
            (insert content))
        (insert (propertize "(empty)\n" 'face 'italic)))
      (goto-char (point-min))))

  )

4.4.4. Functionality enhancements

Emacs Lisp
#
(after! elfeed-show
  (require 'url)

  (defvar elfeed-pdf-dir
    (expand-file-name "pdfs/"
                      (file-name-directory (directory-file-name elfeed-enclosure-default-dir))))

  (defvar elfeed-link-pdfs
    '(("https://www.jstatsoft.org/index.php/jss/article/view/v0\\([^/]+\\)" . "https://www.jstatsoft.org/index.php/jss/article/view/v0\\1/v\\1.pdf")
      ("http://arxiv.org/abs/\\([^/]+\\)" . "https://arxiv.org/pdf/\\1.pdf"))
    "List of alists of the form (REGEX-FOR-LINK . FORM-FOR-PDF)")

  (defun elfeed-show-pdf (entry)
    (interactive
     (list (or elfeed-show-entry (elfeed-search-selected :ignore-region))))
    (let ((link (elfeed-entry-link entry))
          (feed-name (plist-get (elfeed-feed-meta (elfeed-entry-feed entry)) :title))
          (title (elfeed-entry-title entry))
          (file-view-function
           (lambda (f)
             (when elfeed-show-entry
               (elfeed-kill-buffer))
             (pop-to-buffer (find-file-noselect f))))
          pdf)

      (let ((file (expand-file-name
                   (concat (subst-char-in-string ?/ ?, title) ".pdf")
                   (expand-file-name (subst-char-in-string ?/ ?, feed-name)
                                     elfeed-pdf-dir))))
        (if (file-exists-p file)
            (funcall file-view-function file)
          (dolist (link-pdf elfeed-link-pdfs)
            (when (and (string-match-p (car link-pdf) link)
                       (not pdf))
              (setq pdf (replace-regexp-in-string (car link-pdf) (cdr link-pdf) link))))
          (if (not pdf)
              (message "No associated PDF for entry")
            (message "Fetching %s" pdf)
            (unless (file-exists-p (file-name-directory file))
              (make-directory (file-name-directory file) t))
            (url-copy-file pdf file)
            (funcall file-view-function file))))))

  )

4.5. Dictionary

Doom already loads define-word, and provides it’s own definition service using wordnut. However, using an offline dictionary possess a few compelling advantages, namely:

  • speed
  • integration of multiple dictionaries

GoldenDict seems like the best option currently available, but lacks a CLI. Hence, we’ll fall back to sdcv (a CLI version of StarDict) for now. To interface with this, we’ll use a my lexic package.

Screenshot of the lexic-mode view of "literate"
Emacs Lisp
#
(package! lexic :recipe (:local-repo "lisp/lexic"))

Given that a request for a CLI is the most upvoted issue on GitHub for GoldenDict, it’s likely we’ll be able to switch from sdcv to that in the future.

Since GoldenDict supports StarDict files, I expect this will be a relatively painless switch.

We start off by loading lexic, then we’ll integrate it into pre-existing definition functionality (like +lookup/dictionary-definition).

Emacs Lisp
#
(use-package! lexic
  :commands lexic-search lexic-list-dictionary
  :config
  (map! :map lexic-mode-map
        :n "q" #'lexic-return-from-lexic
        :nv "RET" #'lexic-search-word-at-point
        :n "a" #'outline-show-all
        :n "h" (cmd! (outline-hide-sublevels 3))
        :n "o" #'lexic-toggle-entry
        :n "n" #'lexic-next-entry
        :n "N" (cmd! (lexic-next-entry t))
        :n "p" #'lexic-previous-entry
        :n "P" (cmd! (lexic-previous-entry t))
        :n "E" (cmd! (lexic-return-from-lexic) ; expand
                     (switch-to-buffer (lexic-get-buffer)))
        :n "M" (cmd! (lexic-return-from-lexic) ; minimise
                     (lexic-goto-lexic))
        :n "C-p" #'lexic-search-history-backwards
        :n "C-n" #'lexic-search-history-forwards
        :n "/" (cmd! (call-interactively #'lexic-search))))

Now let’s use this instead of wordnet.

Emacs Lisp
#
(defadvice! +lookup/dictionary-definition-lexic (identifier &optional arg)
  "Look up the definition of the word at point (or selection) using `lexic-search'."
  :override #'+lookup/dictionary-definition
  (interactive
   (list (or (doom-thing-at-point-or-region 'word)
             (read-string "Look up in dictionary: "))
         current-prefix-arg))
  (lexic-search identifier nil nil t))

Lastly, I want to make sure I have some dictionaries set up. I’ve put a tarball of dictionaries online which we can download if none seem to be present on the system.

Shell Script
#
DIC_FOLDER=${STARDICT_DATA_DIR:-${XDG_DATA_HOME:-$HOME/.local/share}/stardict}/dic
if [ ! -d "$DIC_FOLDER" ]; then
    TMP="$(mktemp -d /tmp/dict-XXX)"
    cd "$TMP"
    curl -A "Mozilla/4.0" -o "stardict.tar.gz" "https://tecosaur.com/resources/config/stardict.tar.gz"
    tar -xf "stardict.tar.gz"
    rm "stardict.tar.gz"
    mkdir -p "$DIC_FOLDER"
    mv * "$DIC_FOLDER"
fi

4.6. Mail

Email

4.6.1. Fetching

The contenders for this seem to be:

From perusing r/emacs the prevailing opinion seems to be that

  • isync is faster
  • isync works more reliably

So let’s use that.

The config was straightforward, and is located at ~/.mbsyncrc. I’m currently successfully connecting to: Gmail, office365mail, and dovecot. I’m also shoving passwords in my authinfo.gpg and fetching them using PassCmd:

Shell Script
#
gpg2 -q --for-your-eyes-only --no-tty -d ~/.authinfo.gpg | awk '/machine IMAP_SERCER login EMAIL_ADDR/ {print $NF}'

We can run mbsync -a in a systemd service file or something, but we can do better than that. vsemyonoff/easymail seems like the sort of thing we want, but is written for notmuch unfortunately. We can still use it for inspiration though. Using goimapnotify we should be able to sync just after new mail. Unfortunately this means yet another config file :(

We install with

Shell Script
#
go get -u gitlab.com/shackra/goimapnotify
ln -s ~/.local/share/go/bin/goimapnotify ~/.local/bin/

Here’s the general plan:

  1. Use goimapnotify to monitor mailboxes This needs it’s own set of configs, and systemd services, which is a pain. We remove this pain by writing a python script (found below) to setup these config files, and systemd services by parsing the ~/.mbsyncrc file.
  2. On new mail, call mbsync --pull --new ACCOUNT:BOX We try to be as specific as possible, so mbsync returns as soon as possible, and we can get those emails as soon as possible.
  3. Try to call mu index --lazy-fetch. This fails if mu4e is already open (due to a write lock on the database), so in that case we just touch a tmp file (/tmp/mu_reindex_now).
  4. Separately, we set up Emacs to check for the existance of /tmp/mu_reindex_now once a second while mu4e is running, and (after deleting the file) call mu4e-update-index.

Let’s start off by handling the elisp side of things

4.6.1.1. Rebuild mail index while using mu4e
Emacs Lisp
#
(defvar mu4e-reindex-request-file "/tmp/mu_reindex_now"
  "Location of the reindex request, signaled by existance")
(defvar mu4e-reindex-request-min-seperation 5.0
  "Don't refresh again until this many second have elapsed.
Prevents a series of redisplays from being called (when set to an appropriate value)")

(defvar mu4e-reindex-request--file-watcher nil)
(defvar mu4e-reindex-request--file-just-deleted nil)
(defvar mu4e-reindex-request--last-time 0)

(defun mu4e-reindex-request--add-watcher ()
  (setq mu4e-reindex-request--file-just-deleted nil)
  (setq mu4e-reindex-request--file-watcher
        (file-notify-add-watch mu4e-reindex-request-file
                               '(change)
                               #'mu4e-file-reindex-request)))

(defadvice! mu4e-stop-watching-for-reindex-request ()
  :after #'mu4e--server-kill
  (if mu4e-reindex-request--file-watcher
      (file-notify-rm-watch mu4e-reindex-request--file-watcher)))

(defadvice! mu4e-watch-for-reindex-request ()
  :after #'mu4e--server-start
  (mu4e-stop-watching-for-reindex-request)
  (when (file-exists-p mu4e-reindex-request-file)
    (delete-file mu4e-reindex-request-file))
  (mu4e-reindex-request--add-watcher))

(defun mu4e-file-reindex-request (event)
  "Act based on the existance of `mu4e-reindex-request-file'"
  (if mu4e-reindex-request--file-just-deleted
      (mu4e-reindex-request--add-watcher)
    (when (equal (nth 1 event) 'created)
      (delete-file mu4e-reindex-request-file)
      (setq mu4e-reindex-request--file-just-deleted t)
      (mu4e-reindex-maybe t))))

(defun mu4e-reindex-maybe (&optional new-request)
  "Run `mu4e--server-index' if it's been more than
`mu4e-reindex-request-min-seperation'seconds since the last request,"
  (let ((time-since-last-request (- (float-time)
                                    mu4e-reindex-request--last-time)))
    (when new-request
      (setq mu4e-reindex-request--last-time (float-time)))
    (if (> time-since-last-request mu4e-reindex-request-min-seperation)
        (mu4e--server-index nil t)
      (when new-request
        (run-at-time (* 1.1 mu4e-reindex-request-min-seperation) nil
                     #'mu4e-reindex-maybe)))))
4.6.1.2. Config transcoding & service management

As long as the mbsyncrc file exists, this is as easy as running

Shell Script
#
~/.config/doom/misc/mbsync-imapnotify.py

When run without flags this will perform the following actions

  • Read, and parse ~/.mbsyncrc, specifically recognising the following properties
    • IMAPAccount
    • Host
    • Port
    • User
    • Password
    • PassCmd
    • Patterns
  • Call mbsync --list ACCOUNT, and filter results according to Patterns
  • Construct a imapnotify config for each account, with the following hooks
    onNewMail
    onNewMailPost
  • Compare accounts list to previous accounts, enable/disable the relevant systemd services, called with the --now flag (start/stop services as well)

This script also supports the following flags

  • --status to get the status of the relevant systemd services supports active, failing, and disabled
  • --enable to enable all relevant systemd services
  • --disable to disable all relevant systemd services
Python
#
from pathlib import Path
import json
import re
import shutil
import subprocess
import sys
import fnmatch

mbsyncFile = Path("~/.mbsyncrc").expanduser()

imapnotifyConfigFolder = Path("~/.config/imapnotify/").expanduser()
imapnotifyConfigFolder.mkdir(exist_ok=True)
imapnotifyConfigFilename = "notify.conf"

imapnotifyDefault = {
    "host": "",
    "port": 993,
    "tls": True,
    "tlsOptions": {"rejectUnauthorized": True},
    "onNewMail": "",
    "onNewMailPost": "if mu index --lazy-check; then test -f /tmp/mu_reindex_now && rm /tmp/mu_reindex_now; else touch /tmp/mu_reindex_now; fi",
}


def stripQuotes(string):
    if string[0] == '"' and string[-1] == '"':
        return string[1:-1].replace('\\"', '"')


mbsyncInotifyMapping = {
    "Host": (str, "host"),
    "Port": (int, "port"),
    "User": (str, "username"),
    "Password": (str, "password"),
    "PassCmd": (stripQuotes, "passwordCmd"),
    "Patterns": (str, "_patterns"),
}

oldAccounts = [d.name for d in imapnotifyConfigFolder.iterdir() if d.is_dir()]

currentAccount = ""
currentAccountData = {}

successfulAdditions = []


def processLine(line):
    newAcc = re.match(r"^IMAPAccount ([^#]+)", line)

    linecontent = re.sub(r"(^|[^\\])#.*", "", line).split(" ", 1)
    if len(linecontent) != 2:
        return

    parameter, value = linecontent

    if parameter == "IMAPAccount":
        if currentAccountNumber > 0:
            finaliseAccount()
        newAccount(value)
    elif parameter in mbsyncInotifyMapping.keys():
        parser, key = mbsyncInotifyMapping[parameter]
        currentAccountData[key] = parser(value)
    elif parameter == "Channel":
        currentAccountData["onNewMail"] = f"mbsync --pull --new {value}:'%s'"


def newAccount(name):
    global currentAccountNumber
    global currentAccount
    global currentAccountData
    currentAccountNumber += 1
    currentAccount = name
    currentAccountData = {}
    print(f"\n\033[1;32m{currentAccountNumber}\033[0;32m - {name}\033[0;37m")


def accountToFoldername(name):
    return re.sub(r"[^A-Za-z0-9]", "", name)


def finaliseAccount():
    if currentAccountNumber == 0:
        return

    global currentAccountData
    try:
        currentAccountData["boxes"] = getMailBoxes(currentAccount)
    except subprocess.CalledProcessError as e:
        print(
            f"\033[1;31mError:\033[0;31m failed to fetch mailboxes (skipping): "
            + f"`{' '.join(e.cmd)}' returned code {e.returncode}\033[0;37m"
        )
        return
    except subprocess.TimeoutExpired as e:
        print(
            f"\033[1;31mError:\033[0;31m failed to fetch mailboxes (skipping): "
            + f"`{' '.join(e.cmd)}' timed out after {e.timeout:.2f} seconds\033[0;37m"
        )
        return

    if "_patterns" in currentAccountData:
        currentAccountData["boxes"] = applyPatternFilter(
            currentAccountData["_patterns"], currentAccountData["boxes"]
        )

    # strip not-to-be-exported data
    currentAccountData = {
        k: currentAccountData[k] for k in currentAccountData if k[0] != "_"
    }

    parametersSet = currentAccountData.keys()
    currentAccountData = {**imapnotifyDefault, **currentAccountData}
    for key, val in currentAccountData.items():
        valColor = "\033[0;33m" if key in parametersSet else "\033[0;37m"
        print(f"  \033[1;37m{key:<13} {valColor}{val}\033[0;37m")

    if (
            len(currentAccountData["boxes"]) > 15
            and "@gmail.com" in currentAccountData["username"]
    ):
        print(
            "  \033[1;31mWarning:\033[0;31m Gmail raises an error when more than"
            + "\033[1;31m15\033[0;31m simultanious connections are attempted."
            + "\n           You are attempting to monitor "
            + f"\033[1;31m{len(currentAccountData['boxes'])}\033[0;31m mailboxes.\033[0;37m"
        )

    configFile = (
        imapnotifyConfigFolder
        / accountToFoldername(currentAccount)
        / imapnotifyConfigFilename
    )
    configFile.parent.mkdir(exist_ok=True)

    json.dump(currentAccountData, open(configFile, "w"), indent=2)
    print(f" \033[0;35mConfig generated and saved to {configFile}\033[0;37m")

    global successfulAdditions
    successfulAdditions.append(accountToFoldername(currentAccount))


def getMailBoxes(account):
    boxes = subprocess.run(
        ["mbsync", "--list", account], check=True, stdout=subprocess.PIPE, timeout=10.0
    )
    return boxes.stdout.decode("utf-8").strip().split("\n")


def applyPatternFilter(pattern, mailboxes):
    patternRegexs = getPatternRegexes(pattern)
    return [m for m in mailboxes if testPatternRegexs(patternRegexs, m)]


def getPatternRegexes(pattern):
    def addGlob(b):
        blobs.append(b.replace('\\"', '"'))
        return ""

    blobs = []
    pattern = re.sub(r' ?"([^"]+)"', lambda m: addGlob(m.groups()[0]), pattern)
    blobs.extend(pattern.split(" "))
    blobs = [
        (-1, fnmatch.translate(b[1::])) if b[0] == "!" else (1, fnmatch.translate(b))
        for b in blobs
    ]
    return blobs


def testPatternRegexs(regexCond, case):
    for factor, regex in regexCond:
        if factor * bool(re.match(regex, case)) < 0:
            return False
    return True


def processSystemdServices():
    keptAccounts = [acc for acc in successfulAdditions if acc in oldAccounts]
    freshAccounts = [acc for acc in successfulAdditions if acc not in oldAccounts]
    staleAccounts = [acc for acc in oldAccounts if acc not in successfulAdditions]

    if keptAccounts:
        print(f"\033[1;34m{len(keptAccounts)}\033[0;34m kept accounts:\033[0;37m")
        restartAccountSystemdServices(keptAccounts)

    if freshAccounts:
        print(f"\033[1;32m{len(freshAccounts)}\033[0;32m new accounts:\033[0;37m")
        enableAccountSystemdServices(freshAccounts)
    else:
        print(f"\033[0;32mNo new accounts.\033[0;37m")

    notActuallyEnabledAccounts = [
        acc for acc in successfulAdditions if not getAccountServiceState(acc)["enabled"]
    ]
    if notActuallyEnabledAccounts:
        print(
            f"\033[1;32m{len(notActuallyEnabledAccounts)}\033[0;32m accounts need re-enabling:\033[0;37m"
        )
        enableAccountSystemdServices(notActuallyEnabledAccounts)

    if staleAccounts:
        print(f"\033[1;33m{len(staleAccounts)}\033[0;33m removed accounts:\033[0;37m")
        disableAccountSystemdServices(staleAccounts)
    else:
        print(f"\033[0;33mNo removed accounts.\033[0;37m")


def enableAccountSystemdServices(accounts):
    for account in accounts:
        print(f" \033[0;32m - \033[1;37m{account:<18}", end="\033[0;37m", flush=True)
        if setSystemdServiceState(
                "enable", f"goimapnotify@{accountToFoldername(account)}.service"
        ):
            print("\033[1;32m enabled")


def disableAccountSystemdServices(accounts):
    for account in accounts:
        print(f" \033[0;33m - \033[1;37m{account:<18}", end="\033[0;37m", flush=True)
        if setSystemdServiceState(
                "disable", f"goimapnotify@{accountToFoldername(account)}.service"
        ):
            print("\033[1;33m disabled")


def restartAccountSystemdServices(accounts):
    for account in accounts:
        print(f" \033[0;34m - \033[1;37m{account:<18}", end="\033[0;37m", flush=True)
        if setSystemdServiceState(
                "restart", f"goimapnotify@{accountToFoldername(account)}.service"
        ):
            print("\033[1;34m restarted")


def setSystemdServiceState(state, service):
    try:
        enabler = subprocess.run(
            ["systemctl", "--user", state, service, "--now"],
            check=True,
            stderr=subprocess.DEVNULL,
            timeout=5.0,
        )
        return True
    except subprocess.CalledProcessError as e:
        print(
            f" \033[1;31mfailed\033[0;31m to {state}, `{' '.join(e.cmd)}'"
            + f"returned code {e.returncode}\033[0;37m"
        )
    except subprocess.TimeoutExpired as e:
        print(f" \033[1;31mtimed out after {e.timeout:.2f} seconds\033[0;37m")
        return False


def getAccountServiceState(account):
    return {
        state: bool(
            1
            - subprocess.run(
                [
                    "systemctl",
                    "--user",
                    f"is-{state}",
                    "--quiet",
                    f"goimapnotify@{accountToFoldername(account)}.service",
                ],
                stderr=subprocess.DEVNULL,
            ).returncode
        )
        for state in ("enabled", "active", "failing")
    }


def getAccountServiceStates(accounts):
    for account in accounts:
        enabled, active, failing = getAccountServiceState(account).values()
        print(f"  - \033[1;37m{account:<18}\033[0;37m ", end="", flush=True)
        if not enabled:
            print("\033[1;33mdisabled\033[0;37m")
        elif active:
            print("\033[1;32mactive\033[0;37m")
        elif failing:
            print("\033[1;31mfailing\033[0;37m")
        else:
            print("\033[1;35min an unrecognised state\033[0;37m")


if len(sys.argv) > 1:
    if sys.argv[1]   in ["-e", "--enable"]:
        enableAccountSystemdServices(oldAccounts)
        exit()
    elif sys.argv[1] in ["-d", "--disable"]:
        disableAccountSystemdServices(oldAccounts)
        exit()
    elif sys.argv[1] in ["-r", "--restart"]:
        restartAccountSystemdServices(oldAccounts)
        exit()
    elif sys.argv[1] in ["-s", "--status"]:
        getAccountServiceStates(oldAccounts)
        exit()
    elif sys.argv[1] in ["-h", "--help"]:
        print("""\033[1;37mMbsync to IMAP Notify config generator.\033[0;37m

Usage: mbsync-imapnotify [options]

Options:
    -e, --enable       enable all services
    -d, --disable      disable all services
    -r, --restart      restart all services
    -s, --status       fetch the status for all services
    -h, --help         show this help
""", end='')
        exit()
    else:
        print(f"\033[0;31mFlag {sys.argv[1]} not recognised, try --help\033[0;37m")
        exit()


mbsyncData = open(mbsyncFile, "r").read()

currentAccountNumber = 0

totalAccounts = len(re.findall(r"^IMAPAccount", mbsyncData, re.M))


def main():
    print("\033[1;34m:: MbSync to Go IMAP notify config file creator ::\033[0;37m")

    shutil.rmtree(imapnotifyConfigFolder)
    imapnotifyConfigFolder.mkdir(exist_ok=False)
    print("\033[1;30mImap Notify config dir purged\033[0;37m")

    print(f"Identified \033[1;32m{totalAccounts}\033[0;32m accounts.\033[0;37m")

    for line in mbsyncData.split("\n"):
        processLine(line)

    finaliseAccount()

    print(
        f"\nConfig files generated for \033[1;36m{len(successfulAdditions)}\033[0;36m"
        + f" out of \033[1;36m{totalAccounts}\033[0;37m accounts.\n"
    )

    processSystemdServices()


if __name__ == "__main__":
    main()
4.6.1.3. Systemd

We then have a service file to run goimapnotify on all of these generated config files. We’ll use a template service file so we can enable a unit per-account.

systemd
#
[Unit]
Description=IMAP notifier using IDLE, golang version.
ConditionPathExists=%h/.config/imapnotify/%I/notify.conf
After=network.target

[Service]
ExecStart=%h/.local/bin/goimapnotify -conf %h/.config/imapnotify/%I/notify.conf
Restart=always
RestartSec=30

[Install]
WantedBy=default.target

Enabling the service is actually taken care of by that python script.

From one or two small tests, this can bring the delay down to as low as five seconds, which I’m quite happy with.

This works well for fetching new mail, but we also want to propagate other changes (e.g. marking mail as read), and make sure we’re up to date at the start, so for that I’ll do the ’normal’ thing and run mbsync -all every so often — let’s say five minutes.

We can accomplish this via a systemd timer, and service file.

systemd
#
[Unit]
Description=call mbsync on all accounts every 5 minutes
ConditionPathExists=%h/.mbsyncrc

[Timer]
OnBootSec=5m
OnUnitInactiveSec=5m

[Install]
WantedBy=default.target
systemd
#
[Unit]
Description=mbsync service, sync all mail
Documentation=man:mbsync(1)
ConditionPathExists=%h/.mbsyncrc

[Service]
Type=oneshot
ExecStart=/usr/bin/mbsync -c %h/.mbsyncrc --all

[Install]
WantedBy=mail.target

Enabling (and starting) this is as simple as

Shell Script
#
systemctl --user enable mbsync.timer --now

4.6.2. Indexing/Searching

This is performed by Mu. This is a tool for finding emails stored in the Maildir format. According to the homepage, it’s main features are

  • Fast indexing
  • Good searching
  • Support for encrypted and signed messages
  • Rich CLI tooling
  • accent/case normalisation
  • strong integration with email clients

Unfortunately mu is not currently packaged from me. Oh well, I guess I’m building it from source then. I needed to install these packages

  • gmime-devel
  • xapian-core-devel
Install mu from sourceShell Script
#
cd ~/.local/lib/
git clone https://github.com/djcb/mu.git
cd ./mu
./autogen.sh
make
sudo make install

To check how my version compares to the latest published:

Shell Script
#
curl --silent "https://api.github.com/repos/djcb/mu/releases/latest" | grep '"tag_name":' | sed -E 's/.*"([^"]+)".*/\1/'
mu --version | head -n 1 | sed 's/.* version //'

4.6.3. Sending

SmtpMail seems to be the ’default’ starting point, but that’s not packaged for me. msmtp is however, so I’ll give that a shot. Reading around a bit (googling “msmtp vs sendmail” for example) almost every comparison mentioned seems to suggest msmtp to be a better choice. I have seen the following points raised

  • sendmail has several vulnerabilities
  • sendmail is tedious to configure
  • ssmtp is no longer maintained
  • msmtp is a maintained alternative to ssmtp
  • msmtp is easier to configure

The config file is ~/.config/msmtp/config.

4.6.3.1. System hackery

Unfortunately, I seem to have run into a bug present in my packaged version, so we’ll just install the latest from source.

For full use of the auth options, I need GNU SASL, which isn’t packaged for me. I don’t think I want it, but in case I do, I’ll need to do this.

Install gsasl from sourceShell Script
#
export GSASL_VERSION=1.8.1
cd ~/.local/lib/
curl "ftp://ftp.gnu.org/gnu/gsasl/libgsasl-$GSASL_VERSION.tar.gz" | tar xz
curl "ftp://ftp.gnu.org/gnu/gsasl/gsasl-$GSASL_VERSION.tar.gz" | tar xz
cd "./libgsasl-$GSASL_VERSION"
./configure
make
sudo make install
cd ..
cd "./gsasl-$VERSION"
./configure
make
sudo make install
cd ..

Now actually compile msmtp.

Install msmtp from sourceShell Script
#
cd ~/.local/lib/
git clone https://github.com/marlam/msmtp-mirror.git ./msmtp
cd ./msmtp
libtoolize --force
aclocal
autoheader
automake --force-missing --add-missing
autoconf
# if using GSASL
# PKG_CONFIG_PATH=/usr/local/lib/pkgconfig ./configure --with-libgsasl
./configure
make
sudo make install

If using GSASL (from earlier) we need to make ensure that the dynamic library in in the library path. We can do by adding an executable with the same name earlier on in my $PATH.

shell
#
LD_LIBRARY_PATH=/usr/local/lib exec /usr/local/bin/msmtp "$@"

4.6.4. Mu4e

Webmail clients are nice and all, but I still don’t believe that SPAs in my browser can replaced desktop apps … sorry Gmail. I’m also liking google less and less.

Mailspring is a decent desktop client, quite lightweight for electron (apparently the backend is in C, which probably helps), however I miss Emacs stuff.

While Notmuch seems very promising, and I’ve heard good things about it, it doesn’t seem to make any changes to the emails themselves. All data is stored in Notmuch’s database. While this is a very interesting model, occasionally I need to pull up an email on say my phone, and so not I want the tagging/folders etc. to be applied to the mail itself — not stored in a database.

On the other hand Mu4e is also talked about a lot in positive terms, and seems to possess a similarly strong feature set — and modifies the mail itself (I.e. information is accessible without the database). Mu4e also seems to have a large user base, which tends to correlate with better support and attention.

If I install mu4e from source, I need to add the /usr/local/ loadpath so Mu4e has a chance of loading. Alternatively, I may need to add the /usr/share/ path.

add-mu4e-load-pathEmacs Lisp
#
(cond
 ((cl-some (lambda (path) (string-match-p "mu4e" path)) load-path) nil)
 ((file-directory-p "/usr/local/share/emacs/site-lisp/mu4e")
  (quote (add-to-list 'load-path "/usr/local/share/emacs/site-lisp/mu4e")))
 ((file-directory-p "/usr/share/emacs/site-lisp/mu4e")
  (quote (add-to-list 'load-path "/usr/share/emacs/site-lisp/mu4e"))))

Let’s also just shove all the Elisp code here in an (after! ...) block.

Emacs Lisp
#
<<mu4e-conf>>
4.6.4.1. Viewing Mail

There seem to be some advantages with using Gnus’ article view (such as inline images), and judging from djcb/mu!1442 (comment) this seems to be the ’way of the future’ for mu4e.

There are some all-the-icons font related issues, so we need to redefine the fancy chars, and make sure they get the correct width.

To account for the increase width of each flag character, and make perform a few more visual tweaks, we’ll tweak the headers a bit

Emacs Lisp
#
(setq mu4e-headers-fields
      '((:flags . 6)
        (:account-stripe . 2)
        (:from-or-to . 25)
        (:folder . 10)
        (:recipnum . 2)
        (:subject . 80)
        (:human-date . 8))
      +mu4e-min-header-frame-width 142
      mu4e-headers-date-format "%d/%m/%y"
      mu4e-headers-time-format "⧖ %H:%M"
      mu4e-headers-results-limit 1000
      mu4e-index-cleanup t)

(add-to-list 'mu4e-bookmarks
             '(:name "Yesterday's messages" :query "date:2d..1d" :key ?y) t)

(defvar +mu4e-header--folder-colors nil)
(appendq! mu4e-header-info-custom
          '((:folder .
             (:name "Folder" :shortname "Folder" :help "Lowest level folder" :function
              (lambda (msg)
                (+mu4e-colorize-str
                 (replace-regexp-in-string "\\`.*/" "" (mu4e-message-field msg :maildir))
                 '+mu4e-header--folder-colors))))))

We’ll also use a nicer alert icon

Emacs Lisp
#
(setq mu4e-alert-icon "/usr/share/icons/Papirus/64x64/apps/evolution.svg")
4.6.4.2. Sending Mail

Let’s send emails too.

Emacs Lisp
#
(setq sendmail-program "/usr/bin/msmtp"
      send-mail-function #'smtpmail-send-it
      message-sendmail-f-is-evil t
      message-sendmail-extra-arguments '("--read-envelope-from"); , "--read-recipients")
      message-send-mail-function #'message-send-mail-with-sendmail)

It’s also nice to avoid accidentally sending emails with the wrong account. If we can send from the address in the To field, let’s do that. Opening a prompt otherwise also seems sensible.

We can register Emacs as a potential email client with a desktop file. We could put an emacsclient ... entry in the Exec field, but I’ve found this a bit dodgy. Instead let’s package the emacslient behaviour in a little executable ~/.local/bin/emacsmail.

Shell Script
#
emacsclient -create-frame --alternate-editor='' --no-wait --eval \
"(progn (x-focus-frame nil) (mu4e-compose-from-mailto \"$1\" t))"

Now we can just call that in a desktop file.

Configuration File
#
[Desktop Entry]
Name=Mu4e
GenericName=Compose a new message with Mu4e in Emacs
Comment=Open mu4e compose window
MimeType=x-scheme-handler/mailto;
Exec=emacsmail %u
Icon=emacs
Type=Application
Terminal=false
Categories=Network;Email;
StartupWMClass=Emacs

To register this, just call

Shell Script
#
update-desktop-database ~/.local/share/applications

We also want to define mu4e-compose-from-mailto.

Emacs Lisp
#
(defun mu4e-compose-from-mailto (mailto-string &optional quit-frame-after)
  (require 'mu4e)
  (unless mu4e--server-props (mu4e t) (sleep-for 0.1))
  (let* ((mailto (message-parse-mailto-url mailto-string))
         (to (cadr (assoc "to" mailto)))
         (subject (or (cadr (assoc "subject" mailto)) ""))
         (body (cadr (assoc "body" mailto)))
         (headers (-filter (lambda (spec) (not (-contains-p '("to" "subject" "body") (car spec)))) mailto)))
    (when-let ((mu4e-main (get-buffer mu4e-main-buffer-name)))
      (switch-to-buffer mu4e-main))
    (mu4e~compose-mail to subject headers)
    (when body
      (goto-char (point-min))
      (if (eq major-mode 'org-msg-edit-mode)
          (org-msg-goto-body)
        (mu4e-compose-goto-bottom))
      (insert body))
    (goto-char (point-min))
    (cond ((null to) (search-forward "To: "))
          ((string= "" subject) (search-forward "Subject: "))
          (t (if (eq major-mode 'org-msg-edit-mode)
                 (org-msg-goto-body)
               (mu4e-compose-goto-bottom))))
    (font-lock-ensure)
    (when evil-normal-state-minor-mode
      (evil-append 1))
    (when quit-frame-after
      (add-hook 'kill-buffer-hook
                `(lambda ()
                   (when (eq (selected-frame) ,(selected-frame))
                     (delete-frame)))))))

It would also be nice to change the name pre-filled in From: when drafting.

Emacs Lisp
#
(defvar mu4e-from-name "Pratik Nayak"
  "Name used in \"From:\" template.")
(defadvice! mu4e~draft-from-construct-renamed (orig-fn)
  "Wrap `mu4e~draft-from-construct-renamed' to change the name."
  :around #'mu4e~draft-from-construct
  (let ((user-full-name mu4e-from-name))
    (funcall orig-fn)))

We can also use this a signature,

Emacs Lisp
#
(setq message-signature mu4e-from-name)

I’ve got a few extra addresses I’d like +mu4e-set-from-address-h to be aware of.

Emacs Lisp
#
(defun +mu4e-update-personal-addresses ()
  (let ((primary-address
         (car (cl-remove-if-not
               (lambda (a) (eq (mod (apply #'* (cl-coerce a 'list)) 600) 0))
               (mu4e-personal-addresses)))))
    (setq +mu4e-personal-addresses
          (and primary-address
               (append (mu4e-personal-addresses)
                       (mapcar
                        (lambda (subalias)
                          (concat subalias "@"
                                  (subst-char-in-string ?@ ?. primary-address)))
                        '("orgmode"))
                       (mapcar
                        (lambda (alias)
                          (replace-regexp-in-string
                           "\\`\\(.*\\)@" alias primary-address t t 1))
                        '("contact" "timothy")))))))

(add-transient-hook! 'mu4e-compose-pre-hook
  (+mu4e-update-personal-addresses))

Speaking of, it would be good to put emails sent from @tecosaur.net in the account-specific sent directory, not the catch-all.

Emacs Lisp
#
(defun +mu4e-account-sent-folder (&optional msg)
  (let ((from (if msg
                  (plist-get (car (plist-get msg :from)) :email)
                (save-restriction
                  (mail-narrow-to-head)
                  (mail-fetch-field "from")))))
    (if (and from (string-match-p "@tecosaur\\.net>?\\'" from))
        "/tecosaur-net/Sent"
      "/sent")))
(setq mu4e-sent-folder #'+mu4e-account-sent-folder)

When composing an email, I think it would make more sense to start off in insert mode than normal mode, which can be accomplished via a compose hook.

Emacs Lisp
#
(defun +mu4e-evil-enter-insert-mode ()
  (when (eq (bound-and-true-p evil-state) 'normal)
    (call-interactively #'evil-append)))

(add-hook 'mu4e-compose-mode-hook #'+mu4e-evil-enter-insert-mode 90)
4.6.4.3. Working with the Org mailing list
4.6.4.3.1. Adding X-Woof headers

I’m fairly active on the Org mailing list (ML). The Org ML has a linked bug/patch tracker, https://updates.orgmode.org/ managed by Woof. However, I feel like I spend too much time looking up what the appropriate headers are for updating the status of bugs and patches. What I need, is some sort of convenient tool. Let’s write one.

First, a function that asks what I want to do and returns the appropriate X-Woof header.

Emacs Lisp
#
(defun +mu4e-get-woof-header ()
  (pcase (read-char
          (format "\
%s
  %s Declare %s Applied %s Aborted
%s
  %s Confirm %s Fixed
%s
  %s Request %s Resolved

%s remove X-Woof header"
                  (propertize "Patch" 'face 'outline-3)
                  (propertize "p" 'face '(bold consult-key))
                  (propertize "a" 'face '(bold consult-key))
                  (propertize "c" 'face '(bold consult-key))
                  (propertize "Bug" 'face 'outline-3)
                  (propertize "b" 'face '(bold consult-key))
                  (propertize "f" 'face '(bold consult-key))
                  (propertize "Help" 'face 'outline-3)
                  (propertize "h" 'face '(bold consult-key))
                  (propertize "r" 'face '(bold consult-key))
                  (propertize "x" 'face '(bold error))))
    (?p "X-Woof-Patch: confirmed")
    (?a "X-Woof-Patch: applied")
    (?c "X-Woof-Patch: cancelled")
    (?b "X-Woof-Bug: confirmed")
    (?f "X-Woof-Bug: fixed")
    (?h "X-Woof-Help: confirmed")
    (?r "X-Woof-Help: cancelled")
    (?x 'delete)))

Now we just need a function which will add such a header to a buffer

Emacs Lisp
#
(defun +mu4e-insert-woof-header ()
  "Insert an X-Woof header into the current message."
  (interactive)
  (when-let ((header (+mu4e-get-woof-header)))
    (save-excursion
      (goto-char (point-min))
      (search-forward "--text follows this line--")
      (unless (eq header 'delete)
        (beginning-of-line)
        (insert header "\n")
        (forward-line -1))
      (when (re-search-backward "^X-Woof-" nil t)
        (kill-whole-line)))))

(map! :map mu4e-compose-mode-map
      :localleader
      :desc "Insert X-Woof Header" "w" #'+mu4e-insert-woof-header)

(map! :map org-msg-edit-mode-map
      :after org-msg
      :localleader
      :desc "Insert X-Woof Header" "w" #'+mu4e-insert-woof-header)

Lovely! That should make adding these headers a breeze.

4.6.4.3.2. Patch workflow

Testing patches from the ML is currently more hassle than it needs to be. Let’s change that.

Emacs Lisp
#
(after! mu4e
  (defvar +org-ml-target-dir
    (expand-file-name "lisp/org/" doom-user-dir))
  (defvar +org-ml-max-age 600
    "Maximum permissible age in seconds.")
  (defvar +org-ml--cache-timestamp 0)
  (defvar +org-ml--cache nil)

  (define-minor-mode +org-ml-patchy-mood-mode
    "Apply patches to Org in bulk."
    :global t
    (let ((action (cons "apply patch to org" #'+org-ml-apply-patch)))
      (if +org-ml-patchy-mood-mode
          (add-to-list 'mu4e-view-actions action)
        (setq mu4e-view-actions (delete action mu4e-view-actions)))))

  (defun +org-ml-apply-patch (msg)
    "Apply the patch in the current message to Org."
    (interactive)
    (unless msg (setq msg (mu4e-message-at-point)))
    (with-current-buffer (get-buffer-create "*Shell: Org apply patches*")
      (erase-buffer)
      (let* ((default-directory +org-ml-target-dir)
             (exit-code (call-process "git" nil t nil "am" (mu4e-message-field msg :path))))
        (magit-refresh)
        (when (not (= 0 exit-code))
          (+popup/buffer)))))

  (defun +org-ml-current-patches ()
    "Get the currently open patches, as a list of alists.
Entries of the form (subject . id)."
    (delq nil
          (mapcar
           (lambda (entry)
             (unless (plist-get entry :fixed)
               (cons
                (format "%-8s  %s"
                        (propertize
                         (replace-regexp-in-string "T.*" ""
                                                   (plist-get entry :date))
                         'face 'font-lock-doc-face)
                        (propertize
                         (replace-regexp-in-string "\\[PATCH\\] ?" ""
                                                   (plist-get entry :summary))
                         'face 'font-lock-keyword-face))
                (plist-get entry :id))))
           (with-current-buffer (url-retrieve-synchronously "https://updates.orgmode.org/data/patches")
             (goto-char url-http-end-of-headers)
             (json-parse-buffer :object-type 'plist)))))

  (defun +org-ml-select-patch-thread ()
    "Find and apply a proposed Org patch."
    (interactive)
    (let* ((current-workspace (+workspace-current))
           (patches (progn
                      (when (or (not +org-ml--cache)
                                (> (- (float-time) +org-ml--cache-timestamp)
                                   +org-ml-max-age))
                        (setq +org-ml--cache (+org-ml-current-patches)
                              +org-ml--cache-timestamp (float-time)))
                      +org-ml--cache))
           (msg-id (cdr (assoc (completing-read
                                "Thread: " (mapcar #'car patches))
                               patches))))
      (+workspace-switch +mu4e-workspace-name)
      (mu4e-view-message-with-message-id msg-id)
      (unless +org-ml-patchy-mood-mode
        (add-to-list 'mu4e-view-actions
                     (cons "apply patch to org" #'+org-ml-transient-mu4e-action)))))

  (defun +org-ml-transient-mu4e-action (msg)
    (setq mu4e-view-actions
          (delete (cons "apply patch to org" #'+org-ml-transient-mu4e-action)
                  mu4e-view-actions))
    (+workspace/other)
    (magit-status +org-ml-target-dir)
    (+org-ml-apply-patch msg)))
4.6.4.3.3. Mail list archive links

The other thing which it’s good to be easily able to do is grab a link to the current message on https://list.orgmode.org.

Emacs Lisp
#
(after! mu4e
  (defun +mu4e-ml-message-link (msg)
    "Copy the link to MSG on the mailing list archives."
    (let* ((list-addr (or (mu4e-message-field msg :list)
                          (thread-last (append (mu4e-message-field-raw msg :list-post)
                                               (mu4e-message-field msg :to)
                                               (mu4e-message-field msg :cc))
                                       (mapcar (lambda (e) (plist-get e :email)))
                                       (mapcar (lambda (addr)
                                                 (when (string-match-p "emacs.*@gnu\\.org$" addr)
                                                   (replace-regexp-in-string "@" "." addr))))
                                       (delq nil)
                                       (car))))
           (msg-url
            (pcase list-addr
              ("emacs-orgmode.gnu.org"
               (format "https://list.orgmode.org/%s" (mu4e-message-field msg :message-id)))
              (_ (user-error "Mailing list %s not supported" list-addr)))))
      (message "Link %s copied to clipboard"
               (propertize (gui-select-text msg-url) 'face '((:weight normal :underline nil) link)))
      msg-url))

  (add-to-list 'mu4e-view-actions (cons "link to message ML" #'+mu4e-ml-message-link) t))

In a similar manner, when clicking on such a link (say when someone uses a link to the archive to refer to an earlier email) I’d much rather look at it in mu4e.

Emacs Lisp
#
(defun +browse-url-orgmode-ml (url &optional _)
  "Open an orgmode list url using notmuch."
  (let ((id (and (or (string-match "^https?://orgmode\\.org/list/\\([^/]+\\)" url)
                     (string-match "^https?://list\\.orgmode\\.org/\\([^/]+\\)" url))
                 (match-string 1 url))))
    (mu4e-view-message-with-message-id id)))

(add-to-list 'browse-url-handlers (cons "^https?://orgmode\\.org/list" #'+browse-url-orgmode-ml))
(add-to-list 'browse-url-handlers (cons "^https?://list\\.orgmode\\.org/" #'+browse-url-orgmode-ml))
4.6.4.3.4. Setup when composing a new email

Thanks to having a dedicated address for my interactions with the Org ML, and Doom’s +mu4e-set-from-address-h, we can tell at the end of compose setup whether I’m composing an email to the Org ML and then do a little setup for convenience, namely:

  • Pre-fill the To address
  • Ensure that org-msg is set up to send plaintext only
  • Set default-directory to my local Org repository (where patch files are generated)
  • Move (point) to the Subject: line
  • Use a special Org-ML-specific signature
Emacs Lisp
#
(defun +mu4e-compose-org-ml-setup ()
  (when (string-match-p "\\`orgmode@" user-mail-address)
    (goto-char (point-min))
    (save-restriction
      (mail-narrow-to-head)
      (when (string-empty-p (mail-fetch-field "to"))
        (re-search-forward "^To: .*$")
        (replace-match "To: emacs-orgmode@gnu.org")
        (advice-add 'message-goto-to :after #'+mu4e-goto-subject-not-to-once)))
    (when (and org-msg-mode
               (re-search-forward "^:alternatives: (\\(utf-8 html\\))" nil t))
      (replace-match "utf-8" t t nil 1))
    (if org-msg-mode
        (let ((final-elem (org-element-at-point (point-max))))
          (when (equal (org-element-property :type final-elem) "signature")
            (goto-char (org-element-property :contents-begin final-elem))
            (delete-region (org-element-property :contents-begin final-elem)
                           (org-element-property :contents-end final-elem))
            (setq-local org-msg-signature
                        (format "\n\n#+begin_signature\n%s\n#+end_signature"
                                (cdr +mu4e-org-ml-signature)))
            (insert (cdr +mu4e-org-ml-signature) "\n")))
      (goto-char (point-max))
      (insert (car +mu4e-org-ml-signature)))
    (setq default-directory
          (replace-regexp-in-string
           (regexp-quote straight-build-dir)
           "repos"
           (file-name-directory (locate-library "org"))))))

(defun +mu4e-goto-subject-not-to-once ()
  (message-goto-subject)
  (advice-remove 'message-goto-to #'+mu4e-goto-subject-not-to-once))

Now let’s set up that signature.

Emacs Lisp
#
(defvar +mu4e-org-ml-signature
  (cons
   "All the best,
Timothy

-- \
Timothy (‘tecosaur’/‘TEC’), Org mode contributor.
Learn more about Org mode at <https://orgmode.org/>.
Support Org development at <https://liberapay.com/org-mode>,
or support my work at <https://liberapay.com/tec>.
"
   "All the best,\\\\
@@html:<b>@@Timothy@@html:</b>@@

-\u200b- \\\\
Timothy (‘tecosaur’/‘TEC’), Org mode contributor.\\\\
Learn more about Org mode at https://orgmode.org/.\\\\
Support Org development at https://liberapay.com/org-mode,\\\\
or support my work at https://liberapay.com/tec.")
  "Plain and Org version of the org-ml specific signature.")

Now to make this take effect, we can just add it a bit later on in mu4e-compose-mode-hook (after org-msg-post-setup) by setting a hook depth of 1.

Emacs Lisp
#
(add-hook 'mu4e-compose-mode-hook #'+mu4e-compose-org-ml-setup 1)

4.6.5. Org Msg

Doom does a fantastic stuff with the defaults with this, so we only make a few minor tweaks. First, some stylistic things:

Emacs Lisp
#
(setq org-msg-greeting-fmt "\nHi%s,\n\n"
      org-msg-signature "\n\n#+begin_signature\nAll the best,\\\\\n@@html:<b>@@Timothy@@html:</b>@@\n#+end_signature")

We also want to set the accent colour used in the Doom mu4e module’s construction of the default org-msg style.

Emacs Lisp
#
(setq +org-msg-accent-color "#1a5fb4")

Now, it would be nice to easily jump to and between the ends of the message body, so let’s make a function for this.

Emacs Lisp
#
(defun +org-msg-goto-body (&optional end)
  "Go to either the beginning or the end of the body.
END can be the symbol top, bottom, or nil to toggle."
  (interactive)
  (let ((initial-pos (point)))
    (org-msg-goto-body)
    (when (or (eq end 'top)
              (and (or (eq initial-pos (point)) ; Already at bottom
                       (<= initial-pos ; Above message body
                           (save-excursion
                             (message-goto-body)
                             (point))))
                   (not (eq end 'bottom))))
      (message-goto-body)
      (search-forward (format org-msg-greeting-fmt
                              (concat " " (org-msg-get-to-name)))))))

We can replace the evil binding of mu4e-compose-goto-bottom with this function.

Emacs Lisp
#
(map! :map org-msg-edit-mode-map
      :after org-msg
      :n "G" #'+org-msg-goto-body)

It would also be good to call this when replying to a message. This has to be implemented as advice as the compose hooks are run before mu4e~compose-handler moves the point with message-goto-<location>.

Emacs Lisp
#
(defun +org-msg-goto-body-when-replying (compose-type &rest _)
  "Call `+org-msg-goto-body' when the current message is a reply."
  (when (and org-msg-edit-mode (eq compose-type 'reply))
    (+org-msg-goto-body)))

(advice-add 'mu4e~compose-handler :after #'+org-msg-goto-body-when-replying)

5. Language configuration

5.1. General

5.1.1. File Templates

For some file types, we overwrite defaults in the snippets directory, others need to have a template assigned.

Emacs Lisp
#
(set-file-template! "\\.tex$" :trigger "__" :mode 'latex-mode)
(set-file-template! "\\.org$" :trigger "__" :mode 'org-mode)
(set-file-template! "\\.hpp.inc$" :trigger "__" :mode 'cuda-mode)
(set-file-template! "/LICEN[CS]E$" :trigger '+file-templates/insert-license)

5.1.2. Documentation lookup through devdocs

devdocs.io looks to be excellent, and of course there is an emacs package to look up docs in emacs. So, I’d definitely want that.

Emacs Lisp
#
(package! devdocs)
Emacs Lisp
#
(add-hook 'python-mode-hook
          (lambda () (setq-local devdocs-current-docs '("python~3.9"))))
(add-hook 'c++-mode-hook
          (lambda () (setq-local devdocs-current-docs '("cpp"))))
(add-hook 'cmake-mode-hook
          (lambda () (setq-local devdocs-current-docs '("cmake~3.21"))))

5.1.3. Rainbow delimiters

Emacs Lisp
#
(add-hook 'c++-mode-hook #'rainbow-delimiters-mode-enable)
(add-hook 'cuda-mode-hook #'rainbow-delimiters-mode-enable)
(add-hook 'cmake-mode-hook #'rainbow-delimiters-mode-enable)

5.1.4. Eglot setup

Emacs Lisp
#
(package! eglot)
Emacs Lisp
#
(use-package eglot
  :ensure t)
(defun pvn/projectile-proj-find-function (dir)
  (let ((root (projectile-project-root dir)))
    (and root (cons 'transient root))))

(require 'eglot)
(defun pvn/cpp-eglot-enable ()
  "enable variables and hooks for eglot cpp IDE"
  (interactive)
  (setq company-backends
        (cons 'company-capf
              (remove 'company-capf company-backends)))
  (with-eval-after-load 'project
    (add-to-list 'project-find-functions
                 'pvn/projectile-proj-find-function))
  (add-to-list 'eglot-server-programs
               '((c++-mode c-mode) , "clangd"))
  (add-hook 'c++-mode-hook 'eglot-ensure)
  (add-hook 'c-mode-hook 'eglot-ensure))

(defun pvn/cpp-eglot-disable ()
  "disable hook for eglot"
  (interactive)
  (remove-hook 'c++-mode-hook 'eglot-ensure)
  (remove-hook 'c-mode-hook 'eglot-ensure))

5.2. Plaintext

5.2.1. Ansi colours

It’s nice to see ANSI colour codes displayed, however we don’t want to disrupt ANSI codes in Org src blocks.

Emacs Lisp
#
(after! text-mode
  (add-hook! 'text-mode-hook
    (unless (derived-mode-p 'org-mode)
      ;; Apply ANSI color codes
      (with-silent-modifications
        (ansi-color-apply-on-region (point-min) (point-max) t)))))

5.2.2. Margin without line numbers

Display-wise, somehow I don’t mind code buffers without any margin on the left, but it feels a bit off with text buffers once the padding provided by line numbers is stripped away.

Emacs Lisp
#
(defvar +text-mode-left-margin-width 1
  "The `left-margin-width' to be used in `text-mode' buffers.")

(defun +setup-text-mode-left-margin ()
  (when (and (derived-mode-p 'text-mode)
             (not (and (bound-and-true-p visual-fill-column-mode)
                       visual-fill-column-center-text))
             (eq (current-buffer) ; Check current buffer is active.
                 (window-buffer (frame-selected-window))))
    (setq left-margin-width (if display-line-numbers
                                0 +text-mode-left-margin-width))
    (set-window-buffer (get-buffer-window (current-buffer))
                       (current-buffer))))

Now we just need to hook this up to all the events which could either indicate a change in the conditions or require the setup to be re-applied.

Emacs Lisp
#
(add-hook 'window-configuration-change-hook #'+setup-text-mode-left-margin)
(add-hook 'display-line-numbers-mode-hook #'+setup-text-mode-left-margin)
(add-hook 'text-mode-hook #'+setup-text-mode-left-margin)

There’s one little niggle with Doom, as doom/toggle-line-numbers doesn’t run display-line-numbers-mode-hook, so some advice is needed.

Emacs Lisp
#
(defadvice! +doom/toggle-line-numbers--call-hook-a ()
  :after #'doom/toggle-line-numbers
  (run-hooks 'display-line-numbers-mode-hook))

Lastly, I think I actually like this enough that I’ll go ahead and remove line numbers in text mode.

Emacs Lisp
#
(remove-hook 'text-mode-hook #'display-line-numbers-mode)

5.3. Org

I really like org mode, I’ve given some thought to why, and below is the result.

Format Fine-grained control Initial ease of use Syntax simplicity Editor Support Integrations Ease-of-referencing Versatility
Word 2 4 4 2 3 2 2
LaTeX 4 1 1 3 2 4 3
Org Mode 4 2 3.5 1 4 4 4
Markdown 1 3 3 4 3 3 1
Markdown + Pandoc 2.5 2.5 2.5 3 3 3 2
Radar chart comparing my opinions of document formats.

Beyond the elegance in the markup language, tremendously rich integrations with Emacs allow for some fantastic features, such as what seems to be the best support for literate programming of any currently available technology.

#
      ╭─╴Code╶─╮            ╭─╴Raw Code╶─▶ Computer
Ideas╺┥        ┝━▶ Org Mode╺┥
      ╰─╴Text╶─╯            ╰─╴Document╶─▶ People

An .org file can contain blocks of code (with noweb templating support), which can be tangled to dedicated source code files, and woven into a document (report, documentation, presentation, etc.) through various (extensible) methods. These source blocks may even create images or other content to be included in the document, or generate source code.

#
                   ╭───────────────────────────────────▶ .pdf ⎫
                  pdfLaTeX ▶╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╮                 ⎪
                   ╿     ╿                  ┊                 ⎪
                   │     ┊                  ┊                 ⎪
                 .tex    ┊                  ┊                 ⎪
                   ╿     ┊                  ┊                 ⎪
                ╭──┴╌╌╮  ┊                  ┊ style.scss      ⎬ Weaving
graphc.png ─╮   │  embedded TeX             ┊      ╽          ⎪ (Documents)
image.jpeg ─┤ filters   ╿                   ┊    .css         ⎪
            ╎     ╿     ┊                   ┊     ▾╎          ⎪
figure.png╶─╧─▶ PROJECT.ORG ▶───╴filters╶───╧──────╪──▶ .html ⎪
     ╿           ╿┊ ║ │ ╰╌╌╌▷╌╌ embedded html ▶╌╌╌╌╯          ⎪
     ├╌╌╌╌╌╌╌▷╌╌╌╯┊ ║ │                                       ⎪
    result╶╌╌╌╌╌╮ ┊ ║ ├──────╴filters╶────────────────▶ .txt  ⎪
     ┊▴         ┊ ┊ ║ │                                       ⎪
    execution   ┊ ┊ ║ ╰──────╴filters╶────────────────▶ .md   ⎭
     ┊▴         ┊ ┊ ║
    code blocks◀╯ ┊ ╟─────────────────────────────────▶ .c    ⎫
     ╰╌╌╌╌◁╌╌╌╌╌╌╌╯ ╟─────────────────────────────────▶ .sh   ⎬ Tangling
                    ╟─────────────────────────────────▶ .hs   ⎪ (Code)
                    ╙─────────────────────────────────▶ .el   ⎭

5.3.1. System config

5.3.1.1. Mime types

Org mode isn’t recognised as it’s own mime type by default, but that can easily be changed with the following file. For system-wide changes try /usr/share/mime/packages/org.xml.

XML
#
<?xml version="1.0" encoding="utf-8"?>
<mime-info xmlns='http://www.freedesktop.org/standards/shared-mime-info'>
  <mime-type type="text/org">
    <comment>Emacs Org-mode File</comment>
    <glob pattern="*.org"/>
    <alias type="text/org"/>
  </mime-type>
</mime-info>

What’s nice is that Papirus now has an icon for text/org. One simply needs to refresh their mime database

Shell Script
#
update-mime-database ~/.local/share/mime

Then set Emacs as the default editor

Shell Script
#
xdg-mime default emacs.desktop text/org
5.3.1.2. Git diffs

Protesilaos wrote a very helpful article in which he explains how to change the git diff chunk heading to something more useful than just the immediate line above the hunk — like the parent heading.

This can be achieved by first adding a new diff mode to git in ~/.config/git/attributes

fundamental
#
*.org   diff=org

Then adding a regex for it to ~/.config/git/config

gitconfig
#
[diff "org"]
  xfuncname = "^(\\*+ +.*)$"

5.3.2. Packages

5.3.2.1. Org itself

There are actually three possible package statements I may want to use for Org.

If I’m on a machine where I can push changes, I want to be able to develop Org. I can check this by checking the content of the SSH key ~/.ssh/id_ed25519.pub.

  1. If this key exists and there isn’t a repo at $doom-user-dir/lisp/org with the right remote, we should install it as such.
  2. If the key exists and repo are both set up, the package should just be ignored.
  3. If the key does not exist, the Org’s HEAD should just be used

To account for this situation properly, we need a short script to determine the correct package statement needed.

org-pkg-statementEmacs Lisp
#
(or (require 'doom (expand-file-name "lisp/doom.el"
                                     (or (bound-and-true-p doom-emacs-dir)
                                         user-emacs-directory)))
    (setq doom-local-dir
          (expand-file-name ".local/" (or (bound-and-true-p doom-emacs-dir)
                                          user-emacs-directory))))
(let ((dev-key-p (and (file-exists-p "~/.ssh/id_ed25519.pub")
                      (= 0 (shell-command "cat ~/.ssh/id_ed25519.pub | grep -q AAAAC3NzaC1lZDI1NTE5AAAAIOZZqcJOLdN+QFHKyW8ST2zz750+8TdvO9IT5geXpQVt"))))
      (recipe-common '(:files (:defaults "etc")
                       :build t
                       :pre-build
                       (with-temp-file "org-version.el"
                         (require 'lisp-mnt)
                         (let ((version ;; (lm-version "lisp/org.el")
                                (with-temp-buffer
                                  (insert-file-contents "lisp/org.el")
                                  (lm-header "version")))
                               (git-version (string-trim
                                             (with-temp-buffer
                                               (call-process "git" nil t nil
                                                             "rev-parse" "--short" "HEAD")
                                               (buffer-string)))))
                           (insert (format "(defun org-release () \"The release version of Org.\" %S)\n"
                                           version)
                                   (format "(defun org-git-version () \"The truncate git commit hash of Org mode.\" %S)\n"
                                           git-version)
                                   "(provide 'org-version)\n"))))))
  (with-temp-buffer
    (insert
     (pp `(package! org
            :recipe (,@(if dev-key-p
                           (list :host nil :repo "tec@git.savannah.gnu.org:/srv/git/emacs/org-mode.git" :local-repo "lisp/org"
                                 :fork (list :host nil :repo "gitea@git.tecosaur.net:tec/org-mode.git" :branch "dev" :remote "tecosaur"))
                         (list :host nil :repo "https://git.tecosaur.net/mirrors/org-mode.git" :remote "mirror"
                               :fork (list :host nil :repo "https://git.tecosaur.net/tec/org-mode.git" :branch "dev" :remote "tecosaur")))
                     ,@recipe-common)
            :pin nil)))
    (untabify (point-min) (point-max))
    (buffer-string)))
Emacs Lisp
#
<<org-pkg-statement()>>
(unpin! org) ; there be bugs
(package! org-contrib
  :recipe (:host nil :repo "https://git.sr.ht/~bzg/org-contrib"
           :files ("lisp/*.el"))
  :pin "6422b265f1150204f024e33d54f2dcfd8323005c")
5.3.2.2. Visuals
5.3.2.2.1. Org Modern

Fontifying org-mode buffers to be as pretty as possible is of paramount importance, and Minad’s lovely org-modern goes a long way in this regard.

Emacs Lisp
#
(package! org-modern :pin "7d037569bc4a05f40262ea110c4cda05c69b5c52")

…with a touch of configuration…

Emacs Lisp
#
(use-package! org-modern
  :hook (org-mode . org-modern-mode)
  :config
  (setq org-modern-star '("◉" "○" "✸" "✿" "✤" "✜" "◆" "▶")
        org-modern-table-vertical 1
        org-modern-table-horizontal 0.2
        org-modern-list '((43 . "➤")
                          (45 . "–")
                          (42 . "•"))
        org-modern-todo-faces
        '(("TODO" :inverse-video t :inherit org-todo)
          ("PROJ" :inverse-video t :inherit +org-todo-project)
          ("STRT" :inverse-video t :inherit +org-todo-active)
          ("[-]"  :inverse-video t :inherit +org-todo-active)
          ("HOLD" :inverse-video t :inherit +org-todo-onhold)
          ("WAIT" :inverse-video t :inherit +org-todo-onhold)
          ("[?]"  :inverse-video t :inherit +org-todo-onhold)
          ("KILL" :inverse-video t :inherit +org-todo-cancel)
          ("NO"   :inverse-video t :inherit +org-todo-cancel))
        org-modern-footnote
        (cons nil (cadr org-script-display))
        org-modern-block-fringe nil
        org-modern-block-name
        '((t . t)
          ("src" "»" "«")
          ("example" "»–" "–«")
          ("quote" "❝" "❞")
          ("export" "⏩" "⏪"))
        org-modern-progress nil
        org-modern-priority nil
        org-modern-horizontal-rule (make-string 36 ?─)
        org-modern-keyword
        '((t . t)
          ("title" . "𝙏")
          ("subtitle" . "𝙩")
          ("author" . "𝘼")
          ("email" . #("" 0 1 (display (raise -0.14))))
          ("date" . "𝘿")
          ("property" . "☸")
          ("options" . "⌥")
          ("startup" . "⏻")
          ("macro" . "𝓜")
          ("bind" . #("" 0 1 (display (raise -0.1))))
          ("bibliography" . "")
          ("print_bibliography" . #("" 0 1 (display (raise -0.1))))
          ("cite_export" . "⮭")
          ("print_glossary" . #("ᴬᶻ" 0 1 (display (raise -0.1))))
          ("glossary_sources" . #("" 0 1 (display (raise -0.14))))
          ("include" . "⇤")
          ("setupfile" . "⇚")
          ("html_head" . "🅷")
          ("html" . "🅗")
          ("latex_class" . "🄻")
          ("latex_class_options" . #("🄻" 1 2 (display (raise -0.14))))
          ("latex_header" . "🅻")
          ("latex_header_extra" . "🅻⁺")
          ("latex" . "🅛")
          ("beamer_theme" . "🄱")
          ("beamer_color_theme" . #("🄱" 1 2 (display (raise -0.12))))
          ("beamer_font_theme" . "🄱𝐀")
          ("beamer_header" . "🅱")
          ("beamer" . "🅑")
          ("attr_latex" . "🄛")
          ("attr_html" . "🄗")
          ("attr_org" . "⒪")
          ("call" . #("" 0 1 (display (raise -0.15))))
          ("name" . "⁍")
          ("header" . "›")
          ("caption" . "☰")
          ("results" . "🠶")))
  (custom-set-faces! '(org-modern-statistics :inherit org-checkbox-statistics-todo)))

Since org-modern’s tag face supplants Org’s tag face, we need to adjust the spell-check face ignore list

Emacs Lisp
#
(after! spell-fu
  (cl-pushnew 'org-modern-tag (alist-get 'org-mode +spell-excluded-faces-alist)))
5.3.2.2.2. Emphasis markers

While org-hide-emphasis-markers is very nice, it can sometimes make edits which occur at the border a bit more fiddley. We can improve this situation without sacrificing visual amenities with the org-appear package.

Emacs Lisp
#
(package! org-appear :recipe (:host github :repo "awth13/org-appear")
  :pin "eb9f9db40aa529fe4b977235d86494b115281d17")
Emacs Lisp
#
(use-package! org-appear
  :hook (org-mode . org-appear-mode)
  :config
  (setq org-appear-autoemphasis t
        org-appear-autosubmarkers t
        org-appear-autolinks nil)
  ;; for proper first-time setup, `org-appear--set-elements'
  ;; needs to be run after other hooks have acted.
  (run-at-time nil nil #'org-appear--set-elements))
5.3.2.2.3. Heading structure

Speaking of headlines, a nice package for viewing and managing the heading structure has come to my attention.

Emacs Lisp
#
(package! org-ol-tree :recipe (:host github :repo "Townk/org-ol-tree")
  :pin "207c748aa5fea8626be619e8c55bdb1c16118c25")

We’ll bind this to O on the org-mode localleader, and manually apply a PR recognising the pgtk window system.

Emacs Lisp
#
(use-package! org-ol-tree
  :commands org-ol-tree
  :config
  (setq org-ol-tree-ui-icon-set
        (if (and (display-graphic-p)
                 (fboundp 'all-the-icons-material))
            'all-the-icons
          'unicode))
  (org-ol-tree-ui--update-icon-set))

(map! :map org-mode-map
      :after org
      :localleader
      :desc "Outline" "O" #'org-ol-tree)
5.3.2.3. Extra functionality
5.3.2.3.1. Julia support

ob-julia is currently a bit borked, but there’s an effort to improve this.

Emacs Lisp
#
(package! ob-julia :recipe (:local-repo "lisp/ob-julia" :files ("*.el" "julia")))
Emacs Lisp
#
(use-package! ob-julia
  :commands org-babel-execute:julia
  :config
  (setq org-babel-julia-command-arguments
        `("--sysimage"
          ,(when-let ((img "~/.local/lib/julia.so")
                      (exists? (file-exists-p img)))
             (expand-file-name img))
          "--threads"
          ,(number-to-string (- (doom-system-cpus) 2))
          "--banner=no")))
5.3.2.3.2. HTTP requests

I like the idea of being able to make HTTP requests with Babel.

Emacs Lisp
#
(package! ob-http :pin "b1428ea2a63bcb510e7382a1bf5fe82b19c104a7")
Emacs Lisp
#
(use-package! ob-http
  :commands org-babel-execute:http)
5.3.2.3.3. Transclusion

There’s a really cool package in development to transclude Org document content.

Emacs Lisp
#
(package! org-transclusion :recipe (:host github :repo "nobiot/org-transclusion")
  :pin "cf51df7b87e0d32ba13ac5380557e81d9845d81b")
Emacs Lisp
#
(use-package! org-transclusion
  :commands org-transclusion-mode
  :init
  (map! :after org :map org-mode-map
        "<f12>" #'org-transclusion-mode))
5.3.2.3.4. Heading graph

Came across this and … it’s cool

Emacs Lisp
#
(package! org-graph-view :recipe (:host github :repo "alphapapa/org-graph-view") :pin "233c6708c1f37fc60604de49ca192497aef39757")
5.3.2.3.5. Cooking recipes

I need this in my life. It take a URL to a recipe from a common site, and inserts an org-ified version at point. Isn’t that just great.

Emacs Lisp
#
(package! org-chef :pin "6a786e77e67a715b3cd4f5128b59d501614928af")

Loading after org seems a bit premature. Let’s just load it when we try to use it, either by command or in a capture template.

Emacs Lisp
#
(use-package! org-chef
  :commands (org-chef-insert-recipe org-chef-get-recipe-from-url))
5.3.2.3.6. Importing with Pandoc

Sometimes I’m given non-org files, that’s very sad. Luckily Pandoc offers a way to make that right again, and this package makes that even easier to do.

Emacs Lisp
#
(package! org-pandoc-import :recipe
  (:local-repo "lisp/org-pandoc-import" :files ("*.el" "filters" "preprocessors")))
Emacs Lisp
#
(use-package! org-pandoc-import
  :after org)
5.3.2.3.7. Glossaries and more

For glossary-type entries, there’s a nice package for this I’m developing.

Emacs Lisp
#
(package! org-glossary :recipe (:local-repo "lisp/org-glossary"))

Other than hooking this to org-mode, we also want to set a collection root and improve the LaTeX usage references with cleveref’s \labelcpageref command.

Emacs Lisp
#
(use-package! org-glossary
  :hook (org-mode . org-glossary-mode)
  :config
  (setq org-glossary-collection-root "~/.config/doom/misc/glossaries/")
  (defun +org-glossary--latex-cdef (backend info term-entry form &optional ref-index plural-p capitalized-p extra-parameters)
    (org-glossary--export-template
     (if (plist-get term-entry :uses)
         "*%d*\\emsp{}%v\\ensp{}@@latex:\\labelcpageref{@@%b@@latex:}@@\n"
       "*%d*\\emsp{}%v\n")
     backend info term-entry ref-index
     plural-p capitalized-p extra-parameters))
  (org-glossary-set-export-spec
   'latex t
   :backref "gls-%K-use-%r"
   :backref-seperator ","
   :definition-structure #'+org-glossary--latex-cdef))
5.3.2.3.8. Document comparison

It’s quite nice to compare Org files, and the richest way to compare content is probably latexdiff. There are a few annoying steps involved here, and so I’ve written a package to streamline the process.

Emacs Lisp
#
(package! orgdiff :recipe (:local-repo "lisp/orgdiff"))

The only little annoyance is the fact that latexdiff uses #FF0000 and #0000FF as the red/blue change indication colours. We can make this a bit nicer by post-processing the latexdiff result.

Emacs Lisp
#
(use-package! orgdiff
  :defer t
  :config
  (defun +orgdiff-nicer-change-colours ()
    (goto-char (point-min))
    ;; Set red/blue based on whether chameleon is being used
    (if (search-forward "%% make document follow Emacs theme" nil t)
        (setq red  (substring (doom-blend 'red 'fg 0.8) 1)
              blue (substring (doom-blend 'blue 'teal 0.6) 1))
      (setq red  "c82829"
            blue "00618a"))
    (when (and (search-forward "%DIF PREAMBLE EXTENSION ADDED BY LATEXDIFF" nil t)
               (search-forward "\\RequirePackage{color}" nil t))
      (when (re-search-forward "definecolor{red}{rgb}{1,0,0}" (cdr (bounds-of-thing-at-point 'line)) t)
        (replace-match (format "definecolor{red}{HTML}{%s}" red)))
      (when (re-search-forward "definecolor{blue}{rgb}{0,0,1}" (cdr (bounds-of-thing-at-point 'line)) t)
        (replace-match (format "definecolor{blue}{HTML}{%s}" blue)))))
  (add-to-list 'orgdiff-latexdiff-postprocess-hooks #'+orgdiff-nicer-change-colours))
5.3.2.3.9. Org music

It’s nice to be able to link to music Seems I have some errors with this. FIXME

Emacs Lisp
#
;;(package! org-music :recipe (:local-repo "lisp/org-music"))
Emacs Lisp
#
;;(use-package! org-music
;;  :after org
;;  :config
;;  (setq org-music-mpris-player "Lollypop"
;;        org-music-track-search-method 'beets
;;        org-music-beets-db "~/Music/library.db"))
5.3.2.3.10. Org download

Drag and drop images into org files.

Emacs Lisp
#
(require 'org-download)
(add-hook 'dired-mode-hook 'org-download-enable)
5.3.2.3.11. Org Journal

Journaling within Org

Emacs Lisp
#
(package! org-journal)
Emacs Lisp
#
(use-package! org-journal
  :ensure t
  :defer t
  :init
  ;; Change default prefix key; needs to be set before loading org-journal
  (setq org-journal-prefix-key "C-c j ")
  :config
  (setq org-journal-dir "~/.org/journal/"
        org-journal-file-format "%Y%m%d.org"
        org-journal-time-prefix "** "
        org-journal-date-format "%A, %d %B %Y"))

5.3.3. Behaviour

Automation

5.3.3.1. Tweaking defaults
Emacs Lisp
#
(setq org-directory (expand-file-name "org" (xdg-data-home)) ; Let's put files here.
      org-agenda-files (list org-directory)                  ; Seems like the obvious place.
      org-use-property-inheritance t                         ; It's convenient to have properties inherited.
      org-log-done 'time                                     ; Having the time a item is done sounds convenient.
      org-list-allow-alphabetical t                          ; Have a. A. a) A) list bullets.
      org-catch-invisible-edits 'smart                       ; Try not to accidently do weird stuff in invisible regions.
      org-export-with-sub-superscripts '{}                   ; Don't treat lone _ / ^ as sub/superscripts, require _{} / ^{}.
      org-export-allow-bind-keywords t                       ; Bind keywords can be handy
      org-image-actual-width '(0.9))                         ; Make the in-buffer display closer to the exported result..

I also like the :comments header-argument, so let’s make that a default.

Emacs Lisp
#
(setq org-babel-default-header-args
      '((:session . "none")
        (:results . "replace")
        (:exports . "code")
        (:cache . "no")
        (:noweb . "no")
        (:hlines . "no")
        (:tangle . "no")
        (:comments . "link")))

By default, visual-line-mode is turned on, and auto-fill-mode off by a hook. However this messes with tables in Org-mode, and other plaintext files (e.g. markdown, \LaTeX) so I’ll turn it off for this, and manually enable it for more specific modes as desired.

Emacs Lisp
#
(remove-hook 'text-mode-hook #'visual-line-mode)
(add-hook 'text-mode-hook #'auto-fill-mode)

There also seem to be a few keybindings which use hjkl, but miss arrow key equivalents.

Emacs Lisp
#
(map! :map evil-org-mode-map
      :after evil-org
      :n "g <up>" #'org-backward-heading-same-level
      :n "g <down>" #'org-forward-heading-same-level
      :n "g <left>" #'org-up-element
      :n "g <right>" #'org-down-element)
5.3.3.2. Extra functionality
5.3.3.2.1. The utility of zero-width spaces

Occasionally in Org you run into annoyances where you want to have two seperate blocks right together without a space. For example, to emphasise part of a word, or put a currency symbol immediately before an inline source block. There is a solution to this, it just sounds slightly hacky — zero width spaces. Because this is Emacs, we can make this feel much less hacky by making a minor addition to the Org key map 🙂.

Emacs Lisp
#
(map! :map org-mode-map
      :nie "M-SPC M-SPC" (cmd! (insert "\u200B")))

We then want to stop the space from being included in exports, which can be done with a little filter.

Emacs Lisp
#
(defun +org-export-remove-zero-width-space (text _backend _info)
  "Remove zero width spaces from TEXT."
  (unless (org-export-derived-backend-p 'org)
    (replace-regexp-in-string "\u200B" "" text)))

(after! ox
  (add-to-list 'org-export-filter-final-output-functions #'+org-export-remove-zero-width-space t))
5.3.3.2.2. List bullet sequence

I think it makes sense to have list bullets change with depth

Emacs Lisp
#
(setq org-list-demote-modify-bullet '(("+" . "-") ("-" . "+") ("*" . "+") ("1." . "a.")))
5.3.3.2.4. Citation

Extending the :tools biblio module.

References in Org are fairly easy now, thanks to org-cite. The :tools biblio module gives a fairly decent basic setup, but it would be nice to take it a bit further. This mostly consists of tweaking settings, but there is one extra package I’ll grab for prettier in-buffer citations.

Emacs Lisp
#
(package! org-cite-csl-activate :recipe (:host github :repo "andras-simonyi/org-cite-csl-activate") :pin "9e68d9204469c674f49a20bdf7ea85da4f4bf720")

In particular, by setting org-cite-csl-activate-use-document-style, we can have the in-buffer displayed citations be the same as the exported form. Isn’t that lovely!

Unfortunately, there’s currently a potential for undesirable buffer modifications, so we’ll put all the activation code behind a function we can call when we want it.

Emacs Lisp
#
(use-package! oc-csl-activate
  :after oc
  :config
  (setq org-cite-csl-activate-use-document-style t)
  (defun +org-cite-csl-activate/enable ()
    (interactive)
    (setq org-cite-activate-processor 'csl-activate)
    (add-hook! 'org-mode-hook '((lambda () (cursor-sensor-mode 1)) org-cite-csl-activate-render-all))
    (defadvice! +org-cite-csl-activate-render-all-silent (orig-fn)
      :around #'org-cite-csl-activate-render-all
      (with-silent-modifications (funcall orig-fn)))
    (when (eq major-mode 'org-mode)
      (with-silent-modifications
        (save-excursion
          (goto-char (point-min))
          (org-cite-activate (point-max)))
        (org-cite-csl-activate-render-all)))
    (fmakunbound #'+org-cite-csl-activate/enable)))

Now that oc-csl-activate is set up, let’s go ahead and customise some of the packages already loaded. For starters, we can make use of the my Zotero files with citar, and make the symbols a bit prettier.

Emacs Lisp
#
(after! citar
  (setq org-cite-global-bibliography
        (let ((libfile-search-names '("library.json" "Library.json" "library.bib" "Library.bib"))
              (libfile-dir "~/Zotero")
              paths)
          (dolist (libfile libfile-search-names)
            (when (and (not paths)
                       (file-exists-p (expand-file-name libfile libfile-dir)))
              (setq paths (list (expand-file-name libfile libfile-dir)))))
          paths)
        citar-bibliography org-cite-global-bibliography
        citar-symbols
        `((file ,(all-the-icons-faicon "file-o" :face 'all-the-icons-green :v-adjust -0.1) . " ")
          (note ,(all-the-icons-material "speaker_notes" :face 'all-the-icons-blue :v-adjust -0.3) . " ")
          (link ,(all-the-icons-octicon "link" :face 'all-the-icons-orange :v-adjust 0.01) . " "))))

We can also make the Zotero CSL styles available to use.

Emacs Lisp
#
(after! oc-csl
  (setq org-cite-csl-styles-dir "~/Zotero/styles"))

Since CSL works so nicely everywhere, we might as well use it as the default citation export processor for everything.

Emacs Lisp
#
(after! oc
  (setq org-cite-export-processors '((t csl))))

Then, for convenience we’ll cap things off by putting the citation command under Org’s localleader.

Emacs Lisp
#
(map! :after org
      :map org-mode-map
      :localleader
      :desc "Insert citation" "@" #'org-cite-insert)

Lastly, just in case I come across any old citations of mine, I think it would be nice to have a function to convert org-ref citations to org-cite forms.

Emacs Lisp
#
(after! oc
  (defun org-ref-to-org-cite ()
    "Attempt to convert org-ref citations to org-cite syntax."
    (interactive)
    (let* ((cite-conversions '(("cite" . "//b") ("Cite" . "//bc")
                               ("nocite" . "/n")
                               ("citep" . "") ("citep*" . "//f")
                               ("parencite" . "") ("Parencite" . "//c")
                               ("citeauthor" . "/a/f") ("citeauthor*" . "/a")
                               ("citeyear" . "/na/b")
                               ("Citep" . "//c") ("Citealp" . "//bc")
                               ("Citeauthor" . "/a/cf") ("Citeauthor*" . "/a/c")
                               ("autocite" . "") ("Autocite" . "//c")
                               ("notecite" . "/l/b") ("Notecite" . "/l/bc")
                               ("pnotecite" . "/l") ("Pnotecite" . "/l/bc")))
           (cite-regexp (rx (regexp (regexp-opt (mapcar #'car cite-conversions) t))
                            ":" (group (+ (not (any "\n     ,.)]}")))))))
      (save-excursion
        (goto-char (point-min))
        (while (re-search-forward cite-regexp nil t)
          (message (format "[cite%s:@%s]"
                                 (cdr (assoc (match-string 1) cite-conversions))
                                 (match-string 2)))
          (replace-match (format "[cite%s:@%s]"
                                 (cdr (assoc (match-string 1) cite-conversions))
                                 (match-string 2))))))))
5.3.3.2.5. cdlatex

It’s also nice to be able to use cdlatex.

Emacs Lisp
#
(add-hook 'org-mode-hook 'turn-on-org-cdlatex)

It’s handy to be able to quickly insert environments with C-c }. I almost always want to edit them afterwards though, so let’s make that happen by default.

Emacs Lisp
#
(defadvice! org-edit-latex-emv-after-insert ()
  :after #'org-cdlatex-environment-indent
  (org-edit-latex-environment))

At some point in the future it could be good to investigate splitting org blocks. Likewise this looks good for symbols.

5.3.3.2.6. LSP support in src blocks

Now, by default, LSPs don’t really function at all in src blocks.

Emacs Lisp
#
(cl-defmacro lsp-org-babel-enable (lang)
  "Support LANG in org source code block."
  (setq centaur-lsp 'lsp-mode)
  (cl-check-type lang stringp)
  (let* ((edit-pre (intern (format "org-babel-edit-prep:%s" lang)))
         (intern-pre (intern (format "lsp--%s" (symbol-name edit-pre)))))
    `(progn
       (defun ,intern-pre (info)
         (let ((file-name (->> info caddr (alist-get :file))))
           (unless file-name
             (setq file-name (make-temp-file "babel-lsp-")))
           (setq buffer-file-name file-name)
           (lsp-deferred)))
       (put ',intern-pre 'function-documentation
            (format "Enable lsp-mode in the buffer of org source block (%s)."
                    (upcase ,lang)))
       (if (fboundp ',edit-pre)
           (advice-add ',edit-pre :after ',intern-pre)
         (progn
           (defun ,edit-pre (info)
             (,intern-pre info))
           (put ',edit-pre 'function-documentation
                (format "Prepare local buffer environment for org source block (%s)."
                        (upcase ,lang))))))))
(defvar org-babel-lang-list
  '("go" "python" "ipython" "bash" "sh"))
(dolist (lang org-babel-lang-list)
  (eval `(lsp-org-babel-enable ,lang)))
5.3.3.2.7. View exported file

'localeader v has no pre-existing binding, so I may as well use it with the same functionality as in LaTeX. Let’s try viewing possible output files with this.

Emacs Lisp
#
(map! :map org-mode-map
      :localleader
      :desc "View exported file" "v" #'org-view-output-file)

(defun org-view-output-file (&optional org-file-path)
  "Visit buffer open on the first output file (if any) found, using `org-view-output-file-extensions'"
  (interactive)
  (let* ((org-file-path (or org-file-path (buffer-file-name) ""))
         (dir (file-name-directory org-file-path))
         (basename (file-name-base org-file-path))
         (output-file nil))
    (dolist (ext org-view-output-file-extensions)
      (unless output-file
        (when (file-exists-p
               (concat dir basename "." ext))
          (setq output-file (concat dir basename "." ext)))))
    (if output-file
        (if (member (file-name-extension output-file) org-view-external-file-extensions)
            (browse-url-xdg-open output-file)
          (pop-to-buffer (or (find-buffer-visiting output-file)
                             (find-file-noselect output-file))))
      (message "No exported file found"))))

(defvar org-view-output-file-extensions '("pdf" "md" "rst" "txt" "tex" "html")
  "Search for output files with these extensions, in order, viewing the first that matches")
(defvar org-view-external-file-extensions '("html")
  "File formats that should be opened externally.")
5.3.3.3. Super agenda

The agenda is nice, but a souped up version is nicer.

Emacs Lisp
#
(package! org-super-agenda :pin "f4f528985397c833c870967884b013cf91a1da4a")
Emacs Lisp
#
(use-package! org-super-agenda
  :commands org-super-agenda-mode)
Emacs Lisp
#
(after! org-agenda
  (let ((inhibit-message t))
    (org-super-agenda-mode)))

(setq org-agenda-skip-scheduled-if-done t
      org-agenda-skip-deadline-if-done t
      org-agenda-include-deadlines t
      org-agenda-block-separator nil
      org-agenda-tags-column 100 ;; from testing this seems to be a good value
      org-agenda-compact-blocks t)

(setq org-agenda-custom-commands
      '(("o" "Overview"
         ((agenda "" ((org-agenda-span 'day)
                      (org-super-agenda-groups
                       '((:name "Today"
                          :time-grid t
                          :date today
                          :todo "TODAY"
                          :scheduled today
                          :order 1)))))
          (alltodo "" ((org-agenda-overriding-header "")
                       (org-super-agenda-groups
                        '((:name "Next to do"
                           :todo "NEXT"
                           :order 1)
                          (:name "Important"
                           :tag "Important"
                           :priority "A"
                           :order 6)
                          (:name "Due Today"
                           :deadline today
                           :order 2)
                          (:name "PhD work"
                           :tag "phd"
                           :order 9)
                          (:name "Ginkgo"
                           :tag "ginkgo"
                           :order 16)
                          (:name "Due Soon"
                           :deadline future
                           :order 8)
                          (:name "Overdue"
                           :deadline past
                           :face error
                           :order 7)
                          (:name "Assignments"
                           :tag "Assignment"
                           :order 10)
                          (:name "Issues"
                           :tag "Issue"
                           :order 12)
                          (:name "Emacs"
                           :tag "Emacs"
                           :order 13)
                          (:name "Projects"
                           :tag "Project"
                           :order 14)
                          (:name "Research"
                           :tag "Research"
                           :order 15)
                          (:name "To read"
                           :tag "Read"
                           :order 30)
                          (:name "Waiting"
                           :todo "WAITING"
                           :order 20)
                          (:name "University"
                           :tag "uni"
                           :order 32)
                          (:name "Trivial"
                           :priority<= "E"
                           :tag ("Trivial" "Unimportant")
                           :todo ("SOMEDAY" )
                           :order 90)
                          (:discard (:tag ("Chore" "Routine" "Daily")))))))))))
5.3.3.4. Capture

Let’s setup some org-capture templates, and make them visually nice to access.

My org-capture dialouge.

doct (Declarative Org Capture Templates) seems to be a nicer way to set up org-capture.

Emacs Lisp
#
(package! doct
  :recipe (:host github :repo "progfolio/doct")
  :pin "8464809754f3316d5a2fdcf3c01ce1e8736b323b")
Emacs Lisp
#
(use-package! doct
  :commands doct)
Emacs Lisp
#
(after! org-capture
  <<prettify-capture>>

  (defun +doct-icon-declaration-to-icon (declaration)
    "Convert :icon declaration to icon"
    (let ((name (pop declaration))
          (set  (intern (concat "all-the-icons-" (plist-get declaration :set))))
          (face (intern (concat "all-the-icons-" (plist-get declaration :color))))
          (v-adjust (or (plist-get declaration :v-adjust) 0.01)))
      (apply set `(,name :face ,face :v-adjust ,v-adjust))))

  (defun +doct-iconify-capture-templates (groups)
    "Add declaration's :icon to each template group in GROUPS."
    (let ((templates (doct-flatten-lists-in groups)))
      (setq doct-templates (mapcar (lambda (template)
                                     (when-let* ((props (nthcdr (if (= (length template) 4) 2 5) template))
                                                 (spec (plist-get (plist-get props :doct) :icon)))
                                       (setf (nth 1 template) (concat (+doct-icon-declaration-to-icon spec)
                                                                      "\t"
                                                                      (nth 1 template))))
                                     template)
                                   templates))))

  (setq doct-after-conversion-functions '(+doct-iconify-capture-templates))

  (defvar +org-capture-recipies  "~/.org/recipies.org")
  (defvar +org-capture-literature "~/.org/gen_literature.org")
  (defvar +org-capture-ginkgo-project-todo-file "~/.org/ginkgo/todo.org")
  (defvar +org-capture-ginkgo-project-ideas-file "~/.org/ginkgo/ideas.org")
  (defvar +org-capture-ginkgo-project-notes-file "~/.org/ginkgo/notes.org")
  (defvar +org-capture-central-project-file "~/.org/projects.org")

  (defun set-org-capture-templates ()
    (setq org-capture-templates
          (doct `(("Personal todo" :keys "t"
                   :icon ("checklist" :set "octicon" :color "green")
                   :file +org-capture-todo-file
                   :prepend t
                   :headline "Personal-todo"
                   :type entry
                   :template ("* TODO %?"
                              "%i %a"))
                  ("Personal note" :keys "n"
                   :icon ("sticky-note-o" :set "faicon" :color "green")
                   :file +org-capture-todo-file
                   :prepend t
                   :headline "Notes"
                   :type entry
                   :template ("* %?"
                              "%i %a"))
                  ("Email" :keys "e"
                   :icon ("envelope" :set "faicon" :color "blue")
                   :file +org-capture-todo-file
                   :prepend t
                   :headline "Inbox"
                   :type entry
                   :template ("* TODO %^{type|reply to|contact} %\\3 %? :email:"
                              "Send an email %^{urgency|soon|ASAP|anon|at some point|eventually} to %^{recipiant}"
                              "about %^{topic}"
                              "%U %i %a"))
                  ("Interesting" :keys "i"
                   :icon ("eye" :set "faicon" :color "lcyan")
                   :file +org-capture-todo-file
                   :prepend t
                   :headline "Interesting"
                   :type entry
                   :template ("* [ ] %{desc}%? :%{i-type}:"
                              "%i %a")
                   :children (("Webpage" :keys "w"
                               :icon ("globe" :set "faicon" :color "green")
                               :desc "%(org-cliplink-capture) "
                               :i-type "read:web")
                              ("Article" :keys "a"
                               :icon ("file-text" :set "octicon" :color "yellow")
                               :desc ""
                               :i-type "read:research")
                              ("Sayings" :keys "s"
                               :icon ("bubble_chart" :set "material" :color "green")
                               :file +org-capture-literature
                               :desc ""
                               :i-type "read:sayings:quotes")
                              ("\tRecipe" :keys "r"
                               :icon ("spoon" :set "faicon" :color "dorange")
                               :file +org-capture-recipies
                               :headline "Unsorted"
                               :template "%(org-chef-get-recipe-from-url)")
                              ("Information" :keys "i"
                               :icon ("info-circle" :set "faicon" :color "blue")
                               :desc ""
                               :i-type "read:info")
                              ("Idea" :keys "I"
                               :icon ("bubble_chart" :set "material" :color "silver")
                               :desc ""
                               :i-type "idea")))
                  ("Tasks" :keys "k"
                   :icon ("inbox" :set "octicon" :color "yellow")
                   :file +org-capture-todo-file
                   :prepend t
                   :headline "Tasks"
                   :type entry
                   :template ("* TODO %? %^G%{extra}"
                              "%i %a")
                   :children (("General Task" :keys "k"
                               :icon ("inbox" :set "octicon" :color "yellow")
                               :extra "")
                              ("Task with deadline" :keys "d"
                               :icon ("timer" :set "material" :color "orange" :v-adjust -0.1)
                               :extra "\nDEADLINE: %^{Deadline:}t")
                              ("Scheduled Task" :keys "s"
                               :icon ("calendar" :set "octicon" :color "orange")
                               :extra "\nSCHEDULED: %^{Start time:}t")))
                  ("Project" :keys "p"
                   :icon ("repo" :set "octicon" :color "silver")
                   :prepend t
                   :type entry
                   :headline "Inbox"
                   :template ("* %{time-or-todo} %?"
                              "%i"
                              "%a")
                   :file ""
                   :custom (:time-or-todo "")
                   :children (("Project-local todo" :keys "t"
                               :icon ("checklist" :set "octicon" :color "green")
                               :time-or-todo "TODO"
                               :file +org-capture-project-todo-file)
                              ("Project-local note" :keys "n"
                               :icon ("sticky-note" :set "faicon" :color "yellow")
                               :time-or-todo "%U"
                               :file +org-capture-project-notes-file)
                              ("Project-local changelog" :keys "c"
                               :icon ("list" :set "faicon" :color "blue")
                               :time-or-todo "%U"
                               :heading "Unreleased"
                               :file +org-capture-project-changelog-file)))
                  ("Ginkgo" :keys "g"
                   :icon ("repo" :set "octicon" :color "green")
                   :prepend t
                   :type entry
                   :headline "Ginkgo"
                   :template ("* %? %^G%{extra}"
                              "%i %a")
                   :file ""
                   :custom (:time-or-todo "")
                   :children (
                              ("Todo" :keys "t"
                               :icon ("checklist" :set "octicon" :color "green")
                               :template ("* TODO %? %^G%{extra}"
                              "%i %a")
                               :time-or-todo "TODO"
                          :extra ""
                               :file +org-capture-ginkgo-project-todo-file)
                              ("Idea" :keys "i"
                               :icon ("light-bulb" :set "octicon" :color "blue")
                               :template ("* IDEA %? %^G%{extra}"
                              "%i %a")
                               :time-or-todo "%U"
                          :extra ""
                               :file +org-capture-ginkgo-project-ideas-file)
                              ("Notes" :keys "n"
                               :icon ("sticky-note" :set "faicon" :color "yellow")
                               :time-or-todo "%U"
                   :extra ""
                               :file +org-capture-ginkgo-project-notes-file)))
                  ("\tCentralised project templates"
                   :keys "o"
                   :type entry
                   :prepend t
                   :template ("* %{time-or-todo} %?"
                              "%i"
                              "%a")
                   :children (("Project todo"
                               :keys "t"
                               :prepend nil
                               :time-or-todo "TODO"
                               :heading "Tasks"
                               :file +org-capture-central-project-file)
                              ("Project note"
                               :keys "n"
                               :time-or-todo "%U"
                               :heading "Notes"
                               :file +org-capture-central-project-file)))))))

  (set-org-capture-templates)
  (unless (display-graphic-p)
    (add-hook 'server-after-make-frame-hook
              (defun org-capture-reinitialise-hook ()
                (when (display-graphic-p)
                  (set-org-capture-templates)
                  (remove-hook 'server-after-make-frame-hook
                               #'org-capture-reinitialise-hook))))))

It would also be nice to improve how the capture dialogue looks

prettify-captureEmacs Lisp
#
(defun org-capture-select-template-prettier (&optional keys)
  "Select a capture template, in a prettier way than default
Lisp programs can force the template by setting KEYS to a string."
  (let ((org-capture-templates
         (or (org-contextualize-keys
              (org-capture-upgrade-templates org-capture-templates)
              org-capture-templates-contexts)
             '(("t" "Task" entry (file+headline "" "Tasks")
                "* TODO %?\n  %u\n  %a")))))
    (if keys
        (or (assoc keys org-capture-templates)
            (error "No capture template referred to by \"%s\" keys" keys))
      (org-mks org-capture-templates
               "Select a capture template\n━━━━━━━━━━━━━━━━━━━━━━━━━"
               "Template key: "
               `(("q" ,(concat (all-the-icons-octicon "stop" :face 'all-the-icons-red :v-adjust 0.01) "\tAbort")))))))
(advice-add 'org-capture-select-template :override #'org-capture-select-template-prettier)

(defun org-mks-pretty (table title &optional prompt specials)
  "Select a member of an alist with multiple keys. Prettified.

TABLE is the alist which should contain entries where the car is a string.
There should be two types of entries.

1. prefix descriptions like (\"a\" \"Description\")
   This indicates that `a' is a prefix key for multi-letter selection, and
   that there are entries following with keys like \"ab\", \"ax\"…

2. Select-able members must have more than two elements, with the first
   being the string of keys that lead to selecting it, and the second a
   short description string of the item.

The command will then make a temporary buffer listing all entries
that can be selected with a single key, and all the single key
prefixes.  When you press the key for a single-letter entry, it is selected.
When you press a prefix key, the commands (and maybe further prefixes)
under this key will be shown and offered for selection.

TITLE will be placed over the selection in the temporary buffer,
PROMPT will be used when prompting for a key.  SPECIALS is an
alist with (\"key\" \"description\") entries.  When one of these
is selected, only the bare key is returned."
  (save-window-excursion
    (let ((inhibit-quit t)
          (buffer (org-switch-to-buffer-other-window "*Org Select*"))
          (prompt (or prompt "Select: "))
          case-fold-search
          current)
      (unwind-protect
          (catch 'exit
            (while t
              (setq-local evil-normal-state-cursor (list nil))
              (erase-buffer)
              (insert title "\n\n")
              (let ((des-keys nil)
                    (allowed-keys '("\C-g"))
                    (tab-alternatives '("\s" "\t" "\r"))
                    (cursor-type nil))
                ;; Populate allowed keys and descriptions keys
                ;; available with CURRENT selector.
                (let ((re (format "\\`%s\\(.\\)\\'"
                                  (if current (regexp-quote current) "")))
                      (prefix (if current (concat current " ") "")))
                  (dolist (entry table)
                    (pcase entry
                      ;; Description.
                      (`(,(and key (pred (string-match re))) ,desc)
                       (let ((k (match-string 1 key)))
                         (push k des-keys)
                         ;; Keys ending in tab, space or RET are equivalent.
                         (if (member k tab-alternatives)
                             (push "\t" allowed-keys)
                           (push k allowed-keys))
                         (insert (propertize prefix 'face 'font-lock-comment-face) (propertize k 'face 'bold) (propertize "›" 'face 'font-lock-comment-face) "  " desc "…" "\n")))
                      ;; Usable entry.
                      (`(,(and key (pred (string-match re))) ,desc . ,_)
                       (let ((k (match-string 1 key)))
                         (insert (propertize prefix 'face 'font-lock-comment-face) (propertize k 'face 'bold) "   " desc "\n")
                         (push k allowed-keys)))
                      (_ nil))))
                ;; Insert special entries, if any.
                (when specials
                  (insert "─────────────────────────\n")
                  (pcase-dolist (`(,key ,description) specials)
                    (insert (format "%s   %s\n" (propertize key 'face '(bold all-the-icons-red)) description))
                    (push key allowed-keys)))
                ;; Display UI and let user select an entry or
                ;; a sub-level prefix.
                (goto-char (point-min))
                (unless (pos-visible-in-window-p (point-max))
                  (org-fit-window-to-buffer))
                (let ((pressed (org--mks-read-key allowed-keys
                                                  prompt
                                                  (not (pos-visible-in-window-p (1- (point-max)))))))
                  (setq current (concat current pressed))
                  (cond
                   ((equal pressed "\C-g") (user-error "Abort"))
                   ;; Selection is a prefix: open a new menu.
                   ((member pressed des-keys))
                   ;; Selection matches an association: return it.
                   ((let ((entry (assoc current table)))
                      (and entry (throw 'exit entry))))
                   ;; Selection matches a special entry: return the
                   ;; selection prefix.
                   ((assoc current specials) (throw 'exit current))
                   (t (error "No entry available")))))))
        (when buffer (kill-buffer buffer))))))
(advice-add 'org-mks :override #'org-mks-pretty)

The org-capture bin is rather nice, but I’d be nicer with a smaller frame, and no modeline.

Emacs Lisp
#
(setf (alist-get 'height +org-capture-frame-parameters) 15)
;; (alist-get 'name +org-capture-frame-parameters) "❖ Capture") ;; ATM hardcoded in other places, so changing breaks stuff
(setq +org-capture-fn
      (lambda ()
        (interactive)
        (set-window-parameter nil 'mode-line-format 'none)
        (org-capture)))
5.3.3.5. Roam
5.3.3.5.1. Basic settings

I’ll just set this to be within Organisation folder for now, in the future it could be worth seeing if I could hook this up to a Nextcloud instance.

Emacs Lisp
#
(setq org-roam-directory "~/.org/roam/")

That said, if the directory doesn’t exist we likely don’t want to be using roam. Since we don’t want to trigger errors (which will happen as soon as roam tries to initialise), let’s not load roam.

Emacs Lisp
#
(package! org-roam :disable t)
5.3.3.5.2. Modeline file name

All those numbers! It’s messy. Let’s adjust this in a similar way that I have in the Window title.

Emacs Lisp
#
(defadvice! doom-modeline--buffer-file-name-roam-aware-a (orig-fun)
  :around #'doom-modeline-buffer-file-name ; takes no args
  (if (s-contains-p org-roam-directory (or buffer-file-name ""))
      (replace-regexp-in-string
       "\\(?:^\\|.*/\\)\\([0-9]\\{4\\}\\)\\([0-9]\\{2\\}\\)\\([0-9]\\{2\\}\\)[0-9]*-"
       "🢔(\\1-\\2-\\3) "
       (subst-char-in-string ?_ ?  buffer-file-name))
    (funcall orig-fun)))
5.3.3.5.3. Graph view

Org-roam is nice by itself, but there are so extra nice packages which integrate with it.

Emacs Lisp
#
(package! org-roam-ui :recipe (:host github :repo "org-roam/org-roam-ui" :files ("*.el" "out")) :pin "5ac74960231db0bf7783c2ba7a19a60f582e91ab")
(package! websocket :pin "82b370602fa0158670b1c6c769f223159affce9b") ; dependency of `org-roam-ui'
Emacs Lisp
#
(use-package! websocket
  :after org-roam)

(use-package! org-roam-ui
  :after org-roam
  :commands org-roam-ui-open
  :hook (org-roam . org-roam-ui-mode)
  :config
  (require 'org-roam) ; in case autoloaded
  (defun org-roam-ui-open ()
    "Ensure the server is active, then open the roam graph."
    (interactive)
    (unless org-roam-ui-mode (org-roam-ui-mode 1))
    (browse-url-xdg-open (format "http://localhost:%d" org-roam-ui-port))))
5.3.3.6. Nicer generated heading IDs

Thanks to alphapapa’s unpackaged.el.

By default, Org generated heading IDs like #org80fc2a5 which … works, but has two issues

  • It’s completely uninformative, I have no idea what’s being referenced
  • If I export the same file, everything will change. Now, while without hardcoded values it’s impossible to set references in stone, it would be nice for there to be a decent chance of staying the same.

Both of these issues can be addressed by generating IDs like #language-configuration, which is what I’ll do here.

It’s worth noting that alphapapa’s use of url-hexify-string seemed to cause me some issues. Replacing that in a53899 resolved this for me. To go one step further, I create a function for producing nice short links, like an inferior version of reftex-label.

Emacs Lisp
#
(defvar org-reference-contraction-max-words 3
  "Maximum number of words in a reference reference.")
(defvar org-reference-contraction-max-length 35
  "Maximum length of resulting reference reference, including joining characters.")
(defvar org-reference-contraction-stripped-words
  '("the" "on" "in" "off" "a" "for" "by" "of" "and" "is" "to")
  "Superfluous words to be removed from a reference.")
(defvar org-reference-contraction-joining-char "-"
  "Character used to join words in the reference reference.")

(defun org-reference-contraction-truncate-words (words)
  "Using `org-reference-contraction-max-length' as the total character 'budget' for the WORDS
and truncate individual words to conform to this budget.

To arrive at a budget that accounts for words undershooting their requisite average length,
the number of characters in the budget freed by short words is distributed among the words
exceeding the average length.  This adjusts the per-word budget to be the maximum feasable for
this particular situation, rather than the universal maximum average.

This budget-adjusted per-word maximum length is given by the mathematical expression below:

max length = \\floor{ \\frac{total length - chars for seperators - \\sum_{word \\leq average length} length(word) }{num(words) > average length} }"
  ;; trucate each word to a max word length determined by
  ;;
  (let* ((total-length-budget (- org-reference-contraction-max-length  ; how many non-separator chars we can use
                                 (1- (length words))))
         (word-length-budget (/ total-length-budget                      ; max length of each word to keep within budget
                                org-reference-contraction-max-words))
         (num-overlong (-count (lambda (word)                            ; how many words exceed that budget
                                 (> (length word) word-length-budget))
                               words))
         (total-short-length (-sum (mapcar (lambda (word)                ; total length of words under that budget
                                             (if (<= (length word) word-length-budget)
                                                 (length word) 0))
                                           words)))
         (max-length (/ (- total-length-budget total-short-length)       ; max(max-length) that we can have to fit within the budget
                        num-overlong)))
    (mapcar (lambda (word)
              (if (<= (length word) max-length)
                  word
                (substring word 0 max-length)))
            words)))

(defun org-reference-contraction (reference-string)
  "Give a contracted form of REFERENCE-STRING that is only contains alphanumeric characters.
Strips 'joining' words present in `org-reference-contraction-stripped-words',
and then limits the result to the first `org-reference-contraction-max-words' words.
If the total length is > `org-reference-contraction-max-length' then individual words are
truncated to fit within the limit using `org-reference-contraction-truncate-words'."
  (let ((reference-words
         (-filter (lambda (word)
                    (not (member word org-reference-contraction-stripped-words)))
                  (split-string
                   (->> reference-string
                        downcase
                        (replace-regexp-in-string "\\[\\[[^]]+\\]\\[\\([^]]+\\)\\]\\]" "\\1") ; get description from org-link
                        (replace-regexp-in-string "[-/ ]+" " ") ; replace seperator-type chars with space
                        puny-encode-string
                        (replace-regexp-in-string "^xn--\\(.*?\\) ?-?\\([a-z0-9]+\\)$" "\\2 \\1") ; rearrange punycode
                        (replace-regexp-in-string "[^A-Za-z0-9 ]" "") ; strip chars which need %-encoding in a uri
                        ) " +"))))
    (when (> (length reference-words)
             org-reference-contraction-max-words)
      (setq reference-words
            (cl-subseq reference-words 0 org-reference-contraction-max-words)))

    (when (> (apply #'+ (1- (length reference-words))
                    (mapcar #'length reference-words))
             org-reference-contraction-max-length)
      (setq reference-words (org-reference-contraction-truncate-words reference-words)))

    (string-join reference-words org-reference-contraction-joining-char)))

Now here’s alphapapa’s subtly tweaked mode.

Emacs Lisp
#
(define-minor-mode unpackaged/org-export-html-with-useful-ids-mode
  "Attempt to export Org as HTML with useful link IDs.
Instead of random IDs like \"#orga1b2c3\", use heading titles,
made unique when necessary."
  :global t
  (if unpackaged/org-export-html-with-useful-ids-mode
      (advice-add #'org-export-get-reference :override #'unpackaged/org-export-get-reference)
    (advice-remove #'org-export-get-reference #'unpackaged/org-export-get-reference)))
(unpackaged/org-export-html-with-useful-ids-mode 1) ; ensure enabled, and advice run

(defun unpackaged/org-export-get-reference (datum info)
  "Like `org-export-get-reference', except uses heading titles instead of random numbers."
  (let ((cache (plist-get info :internal-references)))
    (or (car (rassq datum cache))
        (let* ((crossrefs (plist-get info :crossrefs))
               (cells (org-export-search-cells datum))
               ;; Preserve any pre-existing association between
               ;; a search cell and a reference, i.e., when some
               ;; previously published document referenced a location
               ;; within current file (see
               ;; `org-publish-resolve-external-link').
               ;;
               ;; However, there is no guarantee that search cells are
               ;; unique, e.g., there might be duplicate custom ID or
               ;; two headings with the same title in the file.
               ;;
               ;; As a consequence, before re-using any reference to
               ;; an element or object, we check that it doesn't refer
               ;; to a previous element or object.
               (new (or (cl-some
                         (lambda (cell)
                           (let ((stored (cdr (assoc cell crossrefs))))
                             (when stored
                               (let ((old (org-export-format-reference stored)))
                                 (and (not (assoc old cache)) stored)))))
                         cells)
                        (when (org-element-property :raw-value datum)
                          ;; Heading with a title
                          (unpackaged/org-export-new-named-reference datum cache))
                        (when (member (car datum) '(src-block table example fixed-width property-drawer))
                          ;; Nameable elements
                          (unpackaged/org-export-new-named-reference datum cache))
                        ;; NOTE: This probably breaks some Org Export
                        ;; feature, but if it does what I need, fine.
                        (org-export-format-reference
                         (org-export-new-reference cache))))
               (reference-string new))
          ;; Cache contains both data already associated to
          ;; a reference and in-use internal references, so as to make
          ;; unique references.
          (dolist (cell cells) (push (cons cell new) cache))
          ;; Retain a direct association between reference string and
          ;; DATUM since (1) not every object or element can be given
          ;; a search cell (2) it permits quick lookup.
          (push (cons reference-string datum) cache)
          (plist-put info :internal-references cache)
          reference-string))))

(defun unpackaged/org-export-new-named-reference (datum cache)
  "Return new reference for DATUM that is unique in CACHE."
  (cl-macrolet ((inc-suffixf (place)
                             `(progn
                                (string-match (rx bos
                                                  (minimal-match (group (1+ anything)))
                                                  (optional "--" (group (1+ digit)))
                                                  eos)
                                              ,place)
                                ;; HACK: `s1' instead of a gensym.
                                (-let* (((s1 suffix) (list (match-string 1 ,place)
                                                           (match-string 2 ,place)))
                                        (suffix (if suffix
                                                    (string-to-number suffix)
                                                  0)))
                                  (setf ,place (format "%s--%s" s1 (cl-incf suffix)))))))
    (let* ((headline-p (eq (car datum) 'headline))
           (title (if headline-p
                      (org-element-property :raw-value datum)
                    (or (org-element-property :name datum)
                        (concat (org-element-property :raw-value
                                                      (org-element-property :parent
                                                                            (org-element-property :parent datum)))))))
           ;; get ascii-only form of title without needing percent-encoding
           (ref (concat (org-reference-contraction (substring-no-properties title))
                        (unless (or headline-p (org-element-property :name datum))
                          (concat ","
                                  (pcase (car datum)
                                    ('src-block "code")
                                    ('example "example")
                                    ('fixed-width "mono")
                                    ('property-drawer "properties")
                                    (_ (symbol-name (car datum))))
                                  "--1"))))
           (parent (when headline-p (org-element-property :parent datum))))
      (while (--any (equal ref (car it))
                    cache)
        ;; Title not unique: make it so.
        (if parent
            ;; Append ancestor title.
            (setf title (concat (org-element-property :raw-value parent)
                                "--" title)
                  ;; get ascii-only form of title without needing percent-encoding
                  ref (org-reference-contraction (substring-no-properties title))
                  parent (when headline-p (org-element-property :parent parent)))
          ;; No more ancestors: add and increment a number.
          (inc-suffixf ref)))
      ref)))

(add-hook 'org-load-hook #'unpackaged/org-export-html-with-useful-ids-mode)

We also need to redefine (org-export-format-reference) as it now may be passed a string as well as a number.

Emacs Lisp
#
(defadvice! org-export-format-reference-a (reference)
  "Format REFERENCE into a string.

REFERENCE is a either a number or a string representing a reference,
as returned by `org-export-new-reference'."
  :override #'org-export-format-reference
  (if (stringp reference) reference (format "org%07x" reference)))
5.3.3.7. Nicer org-return

Once again, from unpackaged.el

Emacs Lisp
#
(defun unpackaged/org-element-descendant-of (type element)
  "Return non-nil if ELEMENT is a descendant of TYPE.
TYPE should be an element type, like `item' or `paragraph'.
ELEMENT should be a list like that returned by `org-element-context'."
  ;; MAYBE: Use `org-element-lineage'.
  (when-let* ((parent (org-element-property :parent element)))
    (or (eq type (car parent))
        (unpackaged/org-element-descendant-of type parent))))

;;;###autoload
(defun unpackaged/org-return-dwim (&optional default)
  "A helpful replacement for `org-return-indent'.  With prefix, call `org-return-indent'.

On headings, move point to position after entry content.  In
lists, insert a new item or end the list, with checkbox if
appropriate.  In tables, insert a new row or end the table."
  ;; Inspired by John Kitchin: http://kitchingroup.cheme.cmu.edu/blog/2017/04/09/A-better-return-in-org-mode/
  (interactive "P")
  (if default
      (org-return t)
    (cond
     ;; Act depending on context around point.

     ;; NOTE: I prefer RET to not follow links, but by uncommenting this block, links will be
     ;; followed.

     ;; ((eq 'link (car (org-element-context)))
     ;;  ;; Link: Open it.
     ;;  (org-open-at-point-global))

     ((org-at-heading-p)
      ;; Heading: Move to position after entry content.
      ;; NOTE: This is probably the most interesting feature of this function.
      (let ((heading-start (org-entry-beginning-position)))
        (goto-char (org-entry-end-position))
        (cond ((and (org-at-heading-p)
                    (= heading-start (org-entry-beginning-position)))
               ;; Entry ends on its heading; add newline after
               (end-of-line)
               (insert "\n\n"))
              (t
               ;; Entry ends after its heading; back up
               (forward-line -1)
               (end-of-line)
               (when (org-at-heading-p)
                 ;; At the same heading
                 (forward-line)
                 (insert "\n")
                 (forward-line -1))
               (while (not (looking-back "\\(?:[[:blank:]]?\n\\)\\{3\\}" nil))
                 (insert "\n"))
               (forward-line -1)))))

     ((org-at-item-checkbox-p)
      ;; Checkbox: Insert new item with checkbox.
      (org-insert-todo-heading nil))

     ((org-in-item-p)
      ;; Plain list.  Yes, this gets a little complicated...
      (let ((context (org-element-context)))
        (if (or (eq 'plain-list (car context))  ; First item in list
                (and (eq 'item (car context))
                     (not (eq (org-element-property :contents-begin context)
                              (org-element-property :contents-end context))))
                (unpackaged/org-element-descendant-of 'item context))  ; Element in list item, e.g. a link
            ;; Non-empty item: Add new item.
            (org-insert-item)
          ;; Empty item: Close the list.
          ;; TODO: Do this with org functions rather than operating on the text. Can't seem to find the right function.
          (delete-region (line-beginning-position) (line-end-position))
          (insert "\n"))))

     ((when (fboundp 'org-inlinetask-in-task-p)
        (org-inlinetask-in-task-p))
      ;; Inline task: Don't insert a new heading.
      (org-return t))

     ((org-at-table-p)
      (cond ((save-excursion
               (beginning-of-line)
               ;; See `org-table-next-field'.
               (cl-loop with end = (line-end-position)
                        for cell = (org-element-table-cell-parser)
                        always (equal (org-element-property :contents-begin cell)
                                      (org-element-property :contents-end cell))
                        while (re-search-forward "|" end t)))
             ;; Empty row: end the table.
             (delete-region (line-beginning-position) (line-end-position))
             (org-return t))
            (t
             ;; Non-empty row: call `org-return-indent'.
             (org-return t))))
     (t
      ;; All other cases: call `org-return-indent'.
      (org-return t)))))

(map!
 :after evil-org
 :map evil-org-mode-map
 :i [return] #'unpackaged/org-return-dwim)
5.3.3.8. Snippet Helpers

I often want to set src-block headers, and it’s a pain to

  • type them out
  • remember what the accepted values are
  • oh, and specifying the same language again and again

We can solve this in three steps

  • having one-letter snippets, conditioned on (point) being within a src header
  • creating a nice prompt showing accepted values and the current default
  • pre-filling the src-block language with the last language used

For header args, the keys I’ll use are

  • r for :results
  • e for :exports
  • v for :eval
  • s for :session
  • d for :dir
Emacs Lisp
#
(defun +yas/org-src-header-p ()
  "Determine whether `point' is within a src-block header or header-args."
  (pcase (org-element-type (org-element-context))
    ('src-block (< (point) ; before code part of the src-block
                   (save-excursion (goto-char (org-element-property :begin (org-element-context)))
                                   (forward-line 1)
                                   (point))))
    ('inline-src-block (< (point) ; before code part of the inline-src-block
                          (save-excursion (goto-char (org-element-property :begin (org-element-context)))
                                          (search-forward "]{")
                                          (point))))
    ('keyword (string-match-p "^header-args" (org-element-property :value (org-element-context))))))

Now let’s write a function we can reference in yasnippets to produce a nice interactive way to specify header args.

Emacs Lisp
#
(defun +yas/org-prompt-header-arg (arg question values)
  "Prompt the user to set ARG header property to one of VALUES with QUESTION.
The default value is identified and indicated. If either default is selected,
or no selection is made: nil is returned."
  (let* ((src-block-p (not (looking-back "^#\\+property:[ \t]+header-args:.*" (line-beginning-position))))
         (default
           (or
            (cdr (assoc arg
                        (if src-block-p
                            (nth 2 (org-babel-get-src-block-info t))
                          (org-babel-merge-params
                           org-babel-default-header-args
                           (let ((lang-headers
                                  (intern (concat "org-babel-default-header-args:"
                                                  (+yas/org-src-lang)))))
                             (when (boundp lang-headers) (eval lang-headers t)))))))
            ""))
         default-value)
    (setq values (mapcar
                  (lambda (value)
                    (if (string-match-p (regexp-quote value) default)
                        (setq default-value
                              (concat value " "
                                      (propertize "(default)" 'face 'font-lock-doc-face)))
                      value))
                  values))
    (let ((selection (consult--read values :prompt question :default default-value)))
      (unless (or (string-match-p "(default)$" selection)
                  (string= "" selection))
        selection))))

Finally, we fetch the language information for new source blocks.

Since we’re getting this info, we might as well go a step further and also provide the ability to determine the most popular language in the buffer that doesn’t have any header-args set for it (with #+properties).

Emacs Lisp
#
(defun +yas/org-src-lang ()
  "Try to find the current language of the src/header at `point'.
Return nil otherwise."
  (let ((context (org-element-context)))
    (pcase (org-element-type context)
      ('src-block (org-element-property :language context))
      ('inline-src-block (org-element-property :language context))
      ('keyword (when (string-match "^header-args:\\([^ ]+\\)" (org-element-property :value context))
                  (match-string 1 (org-element-property :value context)))))))

(defun +yas/org-last-src-lang ()
  "Return the language of the last src-block, if it exists."
  (save-excursion
    (beginning-of-line)
    (when (re-search-backward "^[ \t]*#\\+begin_src" nil t)
      (org-element-property :language (org-element-context)))))

(defun +yas/org-most-common-no-property-lang ()
  "Find the lang with the most source blocks that has no global header-args, else nil."
  (let (src-langs header-langs)
    (save-excursion
      (goto-char (point-min))
      (while (re-search-forward "^[ \t]*#\\+begin_src" nil t)
        (push (+yas/org-src-lang) src-langs))
      (goto-char (point-min))
      (while (re-search-forward "^[ \t]*#\\+property: +header-args" nil t)
        (push (+yas/org-src-lang) header-langs)))

    (setq src-langs
          (mapcar #'car
                  ;; sort alist by frequency (desc.)
                  (sort
                   ;; generate alist with form (value . frequency)
                   (cl-loop for (n . m) in (seq-group-by #'identity src-langs)
                            collect (cons n (length m)))
                   (lambda (a b) (> (cdr a) (cdr b))))))

    (car (cl-set-difference src-langs header-langs :test #'string=))))
5.3.3.9. Translate capital keywords (old) to lower case (new)

Everyone used to use #+CAPITAL keywords. Then people realised that #+lowercase is actually both marginally easier and visually nicer, so now the capital version is just used in the manual.

Org is standardized on lower case. Uppercase is used in the manual as a poor man’s bold, and supported for historical reasons. — Nicolas Goaziou on the Org ML

To avoid sometimes having to choose between the hassle out of updating old documents and using mixed syntax, I’ll whip up a basic transcode-y function. It likely misses some edge cases, but should mostly work.

Emacs Lisp
#
(defun org-syntax-convert-keyword-case-to-lower ()
  "Convert all #+KEYWORDS to #+keywords."
  (interactive)
  (save-excursion
    (goto-char (point-min))
    (let ((count 0)
          (case-fold-search nil))
      (while (re-search-forward "^[ \t]*#\\+[A-Z_]+" nil t)
        (unless (s-matches-p "RESULTS" (match-string 0))
          (replace-match (downcase (match-string 0)) t)
          (setq count (1+ count))))
      (message "Replaced %d occurances" count))))
5.3.3.11. Fix problematic hooks

When one of the org-mode-hook functions errors, it halts the hook execution. This is problematic, and there are two hooks in particular which cause issues. Let’s make their failure less eventful.

Emacs Lisp
#
(defadvice! shut-up-org-problematic-hooks (orig-fn &rest args)
  :around #'org-fancy-priorities-mode
  (ignore-errors (apply orig-fn args)))
5.3.3.12. Flycheck with org-lint

Org may be simple, but that doesn’t mean there’s no such thing as malformed Org. Thankfully, malformed Org is a much less annoying affair than malformed zipped XML (looks at DOCX/ODT…), particularly because there’s a rather helpful little tool called org-lint bundled with Org that can tell you about your mistakes.

Invisible Formatting

Flycheck doesn’t currently support Org, and there’s aren’t any packages to do so ☹. However, in an issue on org-lint there is some code which apparently works. Surely this is what the clipboard was invented for? With that said, let’s regurgitate the code, cross our fingers, and hope it works.

Emacs Lisp
#
(defconst flycheck-org-lint-form
  (flycheck-prepare-emacs-lisp-form
    (require 'org)
    (require 'org-attach)
    (let ((source (car command-line-args-left))
          (process-default-directory default-directory))
      (with-temp-buffer
        (insert-file-contents source 'visit)
        (setq buffer-file-name source)
        (setq default-directory process-default-directory)
        (delay-mode-hooks (org-mode))
        (setq delayed-mode-hooks nil)
        (dolist (err (org-lint))
          (let ((inf (cl-second err)))
            (princ (elt inf 0))
            (princ ": ")
            (princ (elt inf 2))
            (terpri)))))))

(defconst flycheck-org-lint-variables
  '(org-directory
    org-id-locations
    org-id-locations-file
    org-attach-id-dir
    org-attach-use-inheritance
    org-attach-id-to-path-function-list
    org-link-parameters)
  "Variables inherited by the org-lint subprocess.")

(defun flycheck-org-lint-variables-form ()
  (require 'org-attach)  ; Needed to make variables available
  `(progn
     ,@(seq-map (lambda (opt) `(setq-default ,opt ',(symbol-value opt)))
                (seq-filter #'boundp flycheck-org-lint-variables))))

(eval ; To preveant eager macro expansion form loading flycheck early.
 '(flycheck-define-checker org-lint
   "Org buffer checker using `org-lint'."
   :command ("emacs" (eval flycheck-emacs-args)
             "--eval" (eval (concat "(add-to-list 'load-path \""
                                    (file-name-directory (locate-library "org"))
                                    "\")"))
             "--eval" (eval (flycheck-sexp-to-string
                             (flycheck-org-lint-variables-form)))
             "--eval" (eval (flycheck-sexp-to-string
                             (flycheck-org-lint-customisations-form)))
             "--eval" (eval flycheck-org-lint-form)
             "--" source)
   :error-patterns
   ((error line-start line ": " (message) line-end))
   :modes org-mode))

Turns out it almost works. Running M-x flycheck-verify-setup after running that snippet produces the following:

#
The following syntax checkers are not registered:
  - org-lint
Try adding these syntax checkers to `flycheck-checkers'.

Well that’s very nice and helpful. We’ll just do that 🙂.

Emacs Lisp
#
(add-to-list 'flycheck-checkers 'org-lint)

It was missing custom link types, but that’s easily fixed just by adding org-link-parameters to flycheck-org-lint-variables.

One remaining little annoyance is that it reports extra #+options that I’ve added to Org as errors. So we need to tell org-lint about them without having it load my whole config. Code duplication isn’t great, but at least this isn’t much.

org-syntax-modificationsEmacs Lisp
#
(defun flycheck-org-lint-customisations-form ()
  `(progn
     (require 'ox)
     (cl-pushnew '(:latex-cover-page nil "coverpage" nil)
                 (org-export-backend-options (org-export-get-backend 'latex)))
     (cl-pushnew '(:latex-font-set nil "fontset" nil)
                 (org-export-backend-options (org-export-get-backend 'latex)))))

5.3.4. Visuals

Here I try to do two things: improve the styling of the various documents, via font changes etc, and also propagate colours from the current theme.

Color Models

5.3.4.1. Font Display

Mixed pitch is great. As is +org-pretty-mode, let’s use them.

Emacs Lisp
#
(add-hook 'org-mode-hook #'+org-pretty-mode)

Let’s make headings a bit bigger

Emacs Lisp
#
(custom-set-faces!
  '(outline-1 :weight extra-bold :height 1.25)
  '(outline-2 :weight bold :height 1.15)
  '(outline-3 :weight bold :height 1.12)
  '(outline-4 :weight semi-bold :height 1.09)
  '(outline-5 :weight semi-bold :height 1.06)
  '(outline-6 :weight semi-bold :height 1.03)
  '(outline-8 :weight semi-bold)
  '(outline-9 :weight semi-bold))

And the same with the title.

Emacs Lisp
#
(custom-set-faces!
  '(org-document-title :height 1.2))

It seems reasonable to have deadlines in the error face when they’re passed.

Emacs Lisp
#
(setq org-agenda-deadline-faces
      '((1.001 . error)
        (1.0 . org-warning)
        (0.5 . org-upcoming-deadline)
        (0.0 . org-upcoming-distant-deadline)))

We can then have quote blocks stand out a bit more by making them italic.

Emacs Lisp
#
(setq org-fontify-quote-and-verse-blocks t)

Org files can be rather nice to look at, particularly with some of the customisations here. This comes at a cost however, expensive font-lock. Feeling like you’re typing through molasses in large files is no fun, but there is a way I can defer font-locking when typing to make the experience more responsive.

Emacs Lisp
#
(defun locally-defer-font-lock ()
  "Set jit-lock defer and stealth, when buffer is over a certain size."
  (when (> (buffer-size) 50000)
    (setq-local jit-lock-defer-time 0.05
                jit-lock-stealth-time 1)))

(add-hook 'org-mode-hook #'locally-defer-font-lock)

Apparently this causes issues with some people, but I haven’t noticed anything problematic beyond the expected slight delay in some fontification, so until I do I’ll use the above.

5.3.4.2. Reduced text indent

Thanks to the various bits and bobs of setup we have here, the non-heading lines tend to appear over-indented in org-indent-mode. We can adjust this by modifying the generated text prefixes.

There’s another issue we can have when using mixed-pitch mode, where the line height is set by the indent prefix displayed with the fixed-pitch font. This means that on 0-indent lines the line spacing can be different, which doesn’t look very good. We can also solve this problem by modifying the generated text prefixes to but a fixed-pitch zero width space at the start of 0-indent lines instead of nothing.

Emacs Lisp
#
(defadvice! +org-indent--reduced-text-prefixes ()
  :after #'org-indent--compute-prefixes
  (setq org-indent--text-line-prefixes
        (make-vector org-indent--deepest-level nil))
  (when (> org-indent-indentation-per-level 0)
    (dotimes (n org-indent--deepest-level)
      (aset org-indent--text-line-prefixes
            n
            (org-add-props
                (concat (make-string (* n (1- org-indent-indentation-per-level))
                                     ?\s)
                        (if (> n 0)
                             (char-to-string org-indent-boundary-char)
                          "\u200b"))
                nil 'face 'org-indent)))))
5.3.4.3. Fontifying inline src blocks

Org does lovely things with #+begin_src blocks, like using font-lock for language’s major-mode behind the scenes and pulling out the lovely colourful results. By contrast, inline src_ blocks are somewhat neglected.

I am not the first person to feel this way, thankfully others have taken to stackexchange to voice their desire for inline src fontification. I was going to steal their work, but unfortunately they didn’t perform true source code fontification, but simply applied the org-code face to the content.

We can do better than that, and we shall! Using org-src-font-lock-fontify-block we can apply language-appropriate syntax highlighting. Then, continuing on to {{{results(...)}}} , it can have the org-block face applied to match, and then the value-surrounding constructs hidden by mimicking the behaviour of prettify-symbols-mode.

This currently only highlights a single inline src block per line. I have no idea why it stops, but I’d rather it didn’t. If you have any idea what’s going on or how to fix this please get in touch.

Emacs Lisp
#
(setq org-inline-src-prettify-results '("⟨" . "⟩"))

Doom theme’s extra fontification is more problematic than helpful.

Emacs Lisp
#
(setq doom-themes-org-fontify-special-tags nil)
5.3.4.4. Symbols

It’s also nice to change the character used for collapsed items (by default ), I think is better for indicating ’collapsed section’. and add an extra org-bullet to the default list of four.

Emacs Lisp
#
(setq org-ellipsis " ▾ "
      org-hide-leading-stars t
      org-priority-highest ?A
      org-priority-lowest ?E
      org-priority-faces
      '((?A . 'all-the-icons-red)
        (?B . 'all-the-icons-orange)
        (?C . 'all-the-icons-yellow)
        (?D . 'all-the-icons-green)
        (?E . 'all-the-icons-blue)))

It’s also nice to make use of the prettify-symbols-mode for a few Org syntactic tokens which we’d like to prettify that aren’t covered by org-modern or any other settings.

Emacs Lisp
#
(appendq! +ligatures-extra-symbols
          (list :list_property "∷"
                :em_dash       "—"
                :ellipses      "…"
                :arrow_right   "→"
                :arrow_left    "←"
                :arrow_lr      "↔"
                :properties    "⚙"
                :end           "∎"
                :priority_a    #("⚑" 0 1 (face all-the-icons-red))
                :priority_b    #("⬆" 0 1 (face all-the-icons-orange))
                :priority_c    #("■" 0 1 (face all-the-icons-yellow))
                :priority_d    #("⬇" 0 1 (face all-the-icons-green))
                :priority_e    #("❓" 0 1 (face all-the-icons-blue))))

(defadvice! +org-init-appearance-h--no-ligatures-a ()
  :after #'+org-init-appearance-h
  (set-ligatures! 'org-mode nil)
  (set-ligatures! 'org-mode
    :list_property "::"
    :em_dash       "---"
    :ellipsis      "..."
    :arrow_right   "->"
    :arrow_left    "<-"
    :arrow_lr      "<->"
    :properties    ":PROPERTIES:"
    :end           ":END:"
    :priority_a    "[#A]"
    :priority_b    "[#B]"
    :priority_c    "[#C]"
    :priority_d    "[#D]"
    :priority_e    "[#E]"))

While we’re at it we may as well make tags prettier as well 🙂

Emacs Lisp
#
;; (package! org-pretty-tags :pin "5c7521651b35ae9a7d3add4a66ae8cc176ae1c76")
Emacs Lisp
#
;; (use-package org-pretty-tags
;; :config
;;  (setq org-pretty-tags-surrogate-strings
;;        `(("uni"        . ,(all-the-icons-faicon   "graduation-cap" :face 'all-the-icons-purple  :v-adjust 0.01))
;;          ("ucc"        . ,(all-the-icons-material "computer"       :face 'all-the-icons-silver  :v-adjust 0.01))
;;          ("assignment" . ,(all-the-icons-material "library_books"  :face 'all-the-icons-orange  :v-adjust 0.01))
;;          ("test"       . ,(all-the-icons-material "timer"          :face 'all-the-icons-red     :v-adjust 0.01))
;;          ("lecture"    . ,(all-the-icons-fileicon "keynote"        :face 'all-the-icons-orange  :v-adjust 0.01))
;;          ("email"      . ,(all-the-icons-faicon   "envelope"       :face 'all-the-icons-blue    :v-adjust 0.01))
;;          ("read"       . ,(all-the-icons-octicon  "book"           :face 'all-the-icons-lblue   :v-adjust 0.01))
;;          ("article"    . ,(all-the-icons-octicon  "file-text"      :face 'all-the-icons-yellow  :v-adjust 0.01))
;;          ("web"        . ,(all-the-icons-faicon   "globe"          :face 'all-the-icons-green   :v-adjust 0.01))
;;          ("info"       . ,(all-the-icons-faicon   "info-circle"    :face 'all-the-icons-blue    :v-adjust 0.01))
;;          ("issue"      . ,(all-the-icons-faicon   "bug"            :face 'all-the-icons-red     :v-adjust 0.01))
;;          ("someday"    . ,(all-the-icons-faicon   "calendar-o"     :face 'all-the-icons-cyan    :v-adjust 0.01))
;;          ("idea"       . ,(all-the-icons-octicon  "light-bulb"     :face 'all-the-icons-yellow  :v-adjust 0.01))
;;          ("emacs"      . ,(all-the-icons-fileicon "emacs"          :face 'all-the-icons-lpurple :v-adjust 0.01))))
;;  (org-pretty-tags-global-mode))
5.3.4.5. LaTeX Fragments
5.3.4.5.1. Prettier highlighting

First off, we want those fragments to look good.

Emacs Lisp
#
(setq org-highlight-latex-and-related '(native script entities))

However, by using native highlighting the org-block face is added, and that doesn’t look too great — particularly when the fragments are previewed.

Ideally org-src-font-lock-fontify-block wouldn’t add the org-block face, but we can avoid advising that entire function by just adding another face with :inherit default which will override the background colour.

Inspecting org-do-latex-and-related shows that "latex" is the language argument passed, and so we can override the background as discussed above.

Emacs Lisp
#
(require 'org-src)
(add-to-list 'org-src-block-faces '("latex" (:inherit default :extend t)))
5.3.4.5.2. Automatic previewing

It would be nice if fragments could automatically be previewed after being typed, and the overlays automatically showed and hidden when moving the point in and out of the LaTeX fragments.

Thankfully, all we need to do to make this happen is use org-latex-preview-auto-mode.

Emacs Lisp
#
(add-hook 'org-mode-hook #'org-latex-preview-auto-mode)
5.3.4.5.3. Prettier rendering

It’s nice to customise the look of LaTeX fragments so they fit better in the text — like this \(\sqrt{\beta^2+3}-\sum_{\phi=1}^\infty \frac{x^\phi-1}{\Gamma(a)}\).

The default snippet preamble basically just sets the margins and text size, with templates to be filled in by org-latex-default-packages-alist and #+latex_header: entries (but not #+latex_header_extra:).

latex-default-snippet-preambleLaTeX
#
\documentclass{article}
[DEFAULT-PACKAGES]
[PACKAGES]

To this, we make two additions:

Emacs Lisp
#
(setq org-latex-preview-header
      (concat
       <<grab("latex-default-snippet-preamble")>>
       "\n% Custom font\n\\usepackage{arev}\n\n"
       <<grab("latex-maths-conveniences")>>))

Since we can, instead of making the background colour match the default face, let’s make it transparent.

Emacs Lisp
#
(plist-put org-format-latex-options :background "Transparent")
(plist-put org-format-latex-options :zoom 0.93) ; Calibrated based on the TeX font and org-buffer font.

With the background taken care of, we just need to make sure we’re using the theme-appropriate foreground.

Emacs Lisp
#
(defun +org-refresh-latex-images-previews-h ()
  (dolist (buffer (doom-buffers-in-mode 'org-mode (buffer-list)))
    (with-current-buffer buffer
      (+org--toggle-inline-images-in-subtree (point-min) (point-max) 'refresh)
      (unless (eq org-latex-preview-default-process 'dvisvgm)
        (org-clear-latex-preview (point-min) (point-max))
        (org--latex-preview-region (point-min) (point-max))))))

(add-hook 'doom-load-theme-hook #'+org-refresh-latex-images-previews-h)
5.3.4.5.4. Rendering speed tests

We can either render from a dvi or pdf file, so let’s benchmark latex and pdflatex.

latex time pdflatex time
135 ± 2 ms 215 ± 3 ms

On the rendering side, there are two .dvi-to-image converters which I am interested in: dvipng and dvisvgm.

Using the above latex expression and benchmarking lead to the following results:

dvipng time dvisvgm time pdf2svg time
89 ± 2 ms 178 ± 2 ms 12 ± 2 ms

Now let’s combine this to see what’s best

Tool chain Total time Resulting file size
latex + dvipng 226 ± 2 ms 7 KiB
latex + dvisvgm 392 ± 4 ms 8 KiB
pdflatex + pdf2svg 230 ± 2 ms 16 KiB

So, let’s use dvipng for previewing LaTeX fragments in-Emacs, but dvisvgm for 5.3.6.12.

Unfortunately, it seems that SVG sizing is annoying ATM, so let’s actually not do this right now.

5.3.4.6. Org Plot

We can use some of the variables in org-plot to use the current doom theme colours.

Emacs Lisp
#
(defvar +org-plot-term-size '(1050 . 650)
  "The size of the GNUPlot terminal, in the form (WIDTH . HEIGHT).")

(after! org-plot
  (defun +org-plot-generate-theme (_type)
    "Use the current Doom theme colours to generate a GnuPlot preamble."
    (format "
fgt = \"textcolor rgb '%s'\" # foreground text
fgat = \"textcolor rgb '%s'\" # foreground alt text
fgl = \"linecolor rgb '%s'\" # foreground line
fgal = \"linecolor rgb '%s'\" # foreground alt line

# foreground colors
set border lc rgb '%s'
# change text colors of  tics
set xtics @fgt
set ytics @fgt
# change text colors of labels
set title @fgt
set xlabel @fgt
set ylabel @fgt
# change a text color of key
set key @fgt

# line styles
set linetype 1 lw 2 lc rgb '%s' # red
set linetype 2 lw 2 lc rgb '%s' # blue
set linetype 3 lw 2 lc rgb '%s' # green
set linetype 4 lw 2 lc rgb '%s' # magenta
set linetype 5 lw 2 lc rgb '%s' # orange
set linetype 6 lw 2 lc rgb '%s' # yellow
set linetype 7 lw 2 lc rgb '%s' # teal
set linetype 8 lw 2 lc rgb '%s' # violet

# border styles
set tics out nomirror
set border 3

# palette
set palette maxcolors 8
set palette defined ( 0 '%s',\
1 '%s',\
2 '%s',\
3 '%s',\
4 '%s',\
5 '%s',\
6 '%s',\
7 '%s' )
"
            (doom-color 'fg)
            (doom-color 'fg-alt)
            (doom-color 'fg)
            (doom-color 'fg-alt)
            (doom-color 'fg)
            ;; colours
            (doom-color 'red)
            (doom-color 'blue)
            (doom-color 'green)
            (doom-color 'magenta)
            (doom-color 'orange)
            (doom-color 'yellow)
            (doom-color 'teal)
            (doom-color 'violet)
            ;; duplicated
            (doom-color 'red)
            (doom-color 'blue)
            (doom-color 'green)
            (doom-color 'magenta)
            (doom-color 'orange)
            (doom-color 'yellow)
            (doom-color 'teal)
            (doom-color 'violet)))

  (defun +org-plot-gnuplot-term-properties (_type)
    (format "background rgb '%s' size %s,%s"
            (doom-color 'bg) (car +org-plot-term-size) (cdr +org-plot-term-size)))

  (setq org-plot/gnuplot-script-preamble #'+org-plot-generate-theme)
  (setq org-plot/gnuplot-term-extra #'+org-plot-gnuplot-term-properties))

5.3.5. Exporting

5.3.5.1. General settings

By default Org only exports the first three levels of headings as … headings. This is rather unfortunate as my documents frequently stray far beyond three levels of depth. The two main formats I care about exporting to are LaTeX and HTML. When using an article class, LaTeX headlines go from \section, \subsection, \subsubsection, and \paragraph to \subgraphfive levels. HTML5 has six levels of headings (<h1> to <h6>), but first level Org headings get exported as <h2> elements — leaving five usable levels.

As such, it would seem to make sense to recognise the first five levels of Org headings when exporting.

Emacs Lisp
#
(setq org-export-headline-levels 5) ; I like nesting

I’m also going to make use of an item in ox-extra so that I can add an :ignore: tag to headings for the content to be kept, but the heading itself ignored (unlike :noexport: which ignored both heading and content). This is useful when I want to use headings to provide a structure for writing that doesn’t appear in the final documents.

Emacs Lisp
#
(require 'ox-extra)
(ox-extras-activate '(ignore-headlines))

Since I (roughly) track Org HEAD, it makes sense to include the git version in the creator string.

Emacs Lisp
#
(setq org-export-creator-string
      (format "Emacs %s (Org mode %s–%s)" emacs-version (org-release) (org-git-version)))
5.3.5.2. Acronym formatting

I like automatically using spaced small caps for acronyms. For strings I want to be unaffected let’s use ; as a prefix to prevent the transformation — i.e. ;JFK (as one would want for two-letter geographic locations and names).

This has to be implemented on a per-format basis, currently HTML and LaTeX exports are supported.

Emacs Lisp
#
(defun org-export-filter-text-acronym (text backend _info)
  "Wrap suspected acronyms in acronyms-specific formatting.
Treat sequences of 2+ capital letters (optionally succeeded by \"s\") as an acronym.
Ignore if preceeded by \";\" (for manual prevention) or \"\\\" (for LaTeX commands).

TODO abstract backend implementations."
  (let ((base-backend
         (cond
          ((org-export-derived-backend-p backend 'latex) 'latex)
          ;; Markdown is derived from HTML, but we don't want to format it
          ((org-export-derived-backend-p backend 'md) nil)
          ((org-export-derived-backend-p backend 'html) 'html)))
        (case-fold-search nil))
    (when base-backend
      (replace-regexp-in-string
       "[;\\\\]?\\b[A-Z][A-Z]+s?\\(?:[^A-Za-z]\\|\\b\\)"
       (lambda (all-caps-str)
         (cond ((equal (aref all-caps-str 0) ?\\) all-caps-str)                ; don't format LaTeX commands
               ((equal (aref all-caps-str 0) ?\;) (substring all-caps-str 1))  ; just remove not-acronym indicator char ";"
               (t (let* ((final-char (if (string-match-p "[^A-Za-z]" (substring all-caps-str -1 (length all-caps-str)))
                                         (substring all-caps-str -1 (length all-caps-str))
                                       nil)) ; needed to re-insert the [^A-Za-z] at the end
                         (trailing-s (equal (aref all-caps-str (- (length all-caps-str) (if final-char 2 1))) ?s))
                         (acr (if final-char
                                  (substring all-caps-str 0 (if trailing-s -2 -1))
                                (substring all-caps-str 0 (+ (if trailing-s -1 (length all-caps-str)))))))
                    (pcase base-backend
                      ('latex (concat "\\acr{" (s-downcase acr) "}" (when trailing-s "\\acrs{}") final-char))
                      ('html (concat "<span class='acr'>" acr "</span>" (when trailing-s "<small>s</small>") final-char)))))))
       text t t))))

(add-to-list 'org-export-filter-plain-text-functions
             #'org-export-filter-text-acronym)

;; We won't use `org-export-filter-headline-functions' because it
;; passes (and formats) the entire section contents. That's no good.

(defun org-html-format-headline-acronymised (todo todo-type priority text tags info)
  "Like `org-html-format-headline-default-function', but with acronym formatting."
  (org-html-format-headline-default-function
   todo todo-type priority (org-export-filter-text-acronym text 'html info) tags info))
(setq org-html-format-headline-function #'org-html-format-headline-acronymised)

(defun org-latex-format-headline-acronymised (todo todo-type priority text tags info)
  "Like `org-latex-format-headline-default-function', but with acronym formatting."
  (org-latex-format-headline-default-function
   todo todo-type priority (org-export-filter-text-acronym text 'latex info) tags info))
(setq org-latex-format-headline-function #'org-latex-format-headline-acronymised)
5.3.5.3. Exporting Org code

With all our Org config and hooks, exporting an Org code block when using a font-lock based method can produce undesirable results. To address this, we can tweak +org-babel-mode-alist when exporting.

Emacs Lisp
#
(defun +org-mode--fontlock-only-mode ()
  "Just apply org-mode's font-lock once."
  (let (org-mode-hook
        org-hide-leading-stars
        org-hide-emphasis-markers)
    (org-set-font-lock-defaults)
    (font-lock-ensure))
  (setq-local major-mode #'fundamental-mode))

(defun +org-export-babel-mask-org-config (_backend)
  "Use `+org-mode--fontlock-only-mode' instead of `org-mode'."
  (setq-local org-src-lang-modes
              (append org-src-lang-modes
                      (list (cons "org" #'+org-mode--fontlock-only)))))

(add-hook 'org-export-before-processing-hook #'+org-export-babel-mask-org-config)

5.3.6. HTML Export

I want to tweak a whole bunch of things. While I’ll want my tweaks almost all the time, occasionally I may want to test how something turns out using a more default config. With that in mind, a global minor mode seems like the most appropriate architecture to use.

Emacs Lisp
#
(define-minor-mode org-fancy-html-export-mode
  "Toggle my fabulous org export tweaks. While this mode itself does a little bit,
the vast majority of the change in behaviour comes from switch statements in:
 - `org-html-template-fancier'
 - `org-html--build-meta-info-extended'
 - `org-html-src-block-collapsable'
 - `org-html-block-collapsable'
 - `org-html-table-wrapped'
 - `org-html--format-toc-headline-colapseable'
 - `org-html--toc-text-stripped-leaves'
 - `org-export-html-headline-anchor'"
  :global t
  :init-value t
  (if org-fancy-html-export-mode
      (setq org-html-style-default org-html-style-fancy
            org-html-meta-tags #'org-html-meta-tags-fancy
            org-html-checkbox-type 'html-span)
    (setq org-html-style-default org-html-style-plain
          org-html-meta-tags #'org-html-meta-tags-default
          org-html-checkbox-type 'html)))
5.3.6.1. Extra header content

We want to tack on a few more bits to the start of the body. Unfortunately, there doesn’t seem to be any nice variable or hook, so we’ll just override the relevant function.

This is done to allow me to add the date and author to the page header, implement a CSS-only light/dark theme toggle, and a sprinkle of Open Graph metadata.

Emacs Lisp
#
(defadvice! org-html-template-fancier (orig-fn contents info)
  "Return complete document string after HTML conversion.
CONTENTS is the transcoded contents string.  INFO is a plist
holding export options. Adds a few extra things to the body
compared to the default implementation."
  :around #'org-html-template
  (if (or (not org-fancy-html-export-mode) (bound-and-true-p org-msg-export-in-progress))
      (funcall orig-fn contents info)
    (concat
     (when (and (not (org-html-html5-p info)) (org-html-xhtml-p info))
       (let* ((xml-declaration (plist-get info :html-xml-declaration))
              (decl (or (and (stringp xml-declaration) xml-declaration)
                        (cdr (assoc (plist-get info :html-extension)
                                    xml-declaration))
                        (cdr (assoc "html" xml-declaration))
                        "")))
         (when (not (or (not decl) (string= "" decl)))
           (format "%s\n"
                   (format decl
                           (or (and org-html-coding-system
                                    (fboundp 'coding-system-get)
                                    (coding-system-get org-html-coding-system 'mime-charset))
                               "iso-8859-1"))))))
     (org-html-doctype info)
     "\n"
     (concat "<html"
             (cond ((org-html-xhtml-p info)
                    (format
                     " xmlns=\"http://www.w3.org/1999/xhtml\" lang=\"%s\" xml:lang=\"%s\""
                     (plist-get info :language) (plist-get info :language)))
                   ((org-html-html5-p info)
                    (format " lang=\"%s\"" (plist-get info :language))))
             ">\n")
     "<head>\n"
     (org-html--build-meta-info info)
     (org-html--build-head info)
     (org-html--build-mathjax-config info)
     "</head>\n"
     "<body>\n<input type='checkbox' id='theme-switch'><div id='page'><label id='switch-label' for='theme-switch'></label>"
     (let ((link-up (org-trim (plist-get info :html-link-up)))
           (link-home (org-trim (plist-get info :html-link-home))))
       (unless (and (string= link-up "") (string= link-home ""))
         (format (plist-get info :html-home/up-format)
                 (or link-up link-home)
                 (or link-home link-up))))
     ;; Preamble.
     (org-html--build-pre/postamble 'preamble info)
     ;; Document contents.
     (let ((div (assq 'content (plist-get info :html-divs))))
       (format "<%s id=\"%s\">\n" (nth 1 div) (nth 2 div)))
     ;; Document title.
     (when (plist-get info :with-title)
       (let ((title (and (plist-get info :with-title)
                         (plist-get info :title)))
             (subtitle (plist-get info :subtitle))
             (html5-fancy (org-html--html5-fancy-p info)))
         (when title
           (format
            (if html5-fancy
                "<header class=\"page-header\">%s\n<h1 class=\"title\">%s</h1>\n%s</header>"
              "<h1 class=\"title\">%s%s</h1>\n")
            (if (or (plist-get info :with-date)
                    (plist-get info :with-author))
                (concat "<div class=\"page-meta\">"
                        (when (plist-get info :with-date)
                          (org-export-data (plist-get info :date) info))
                        (when (and (plist-get info :with-date) (plist-get info :with-author)) ", ")
                        (when (plist-get info :with-author)
                          (org-export-data (plist-get info :author) info))
                        "</div>\n")
              "")
            (org-export-data title info)
            (if subtitle
                (format
                 (if html5-fancy
                     "<p class=\"subtitle\" role=\"doc-subtitle\">%s</p>\n"
                   (concat "\n" (org-html-close-tag "br" nil info) "\n"
                           "<span class=\"subtitle\">%s</span>\n"))
                 (org-export-data subtitle info))
              "")))))
     contents
     (format "</%s>\n" (nth 1 (assq 'content (plist-get info :html-divs))))
     ;; Postamble.
     (org-html--build-pre/postamble 'postamble info)
     ;; Possibly use the Klipse library live code blocks.
     (when (plist-get info :html-klipsify-src)
       (concat "<script>" (plist-get info :html-klipse-selection-script)
               "</script><script src=\""
               org-html-klipse-js
               "\"></script><link rel=\"stylesheet\" type=\"text/css\" href=\""
               org-html-klipse-css "\"/>"))
     ;; Closing document.
     "</div>\n</body>\n</html>")))

I think it would be nice if “Table of Contents” brought you back to the top of the page. Well, since we’ve done this much advising already…

Emacs Lisp
#
(defadvice! org-html-toc-linked (depth info &optional scope)
  "Build a table of contents.

Just like `org-html-toc', except the header is a link to \"#\".

DEPTH is an integer specifying the depth of the table.  INFO is
a plist used as a communication channel.  Optional argument SCOPE
is an element defining the scope of the table.  Return the table
of contents as a string, or nil if it is empty."
  :override #'org-html-toc
  (let ((toc-entries
         (mapcar (lambda (headline)
                   (cons (org-html--format-toc-headline headline info)
                         (org-export-get-relative-level headline info)))
                 (org-export-collect-headlines info depth scope))))
    (when toc-entries
      (let ((toc (concat "<div id=\"text-table-of-contents\">"
                         (org-html--toc-text toc-entries)
                         "</div>\n")))
        (if scope toc
          (let ((outer-tag (if (org-html--html5-fancy-p info)
                               "nav"
                             "div")))
            (concat (format "<%s id=\"table-of-contents\">\n" outer-tag)
                    (let ((top-level (plist-get info :html-toplevel-hlevel)))
                      (format "<h%d><a href=\"#\" style=\"color:inherit; text-decoration: none;\">%s</a></h%d>\n"
                              top-level
                              (org-html--translate "Table of Contents" info)
                              top-level))
                    toc
                    (format "</%s>\n" outer-tag))))))))

Lastly, let’s pile on some metadata. This gives my pages nice embeds.

Emacs Lisp
#
(defvar org-html-meta-tags-opengraph-image
  '(:image "https://tecosaur.com/resources/org/nib.png"
    :type "image/png"
    :width "200"
    :height "200"
    :alt "Green fountain pen nib")
  "Plist of og:image:PROP properties and their value, for use in `org-html-meta-tags-fancy'.")

(defun org-html-meta-tags-fancy (info)
  "Use the INFO plist to construct the meta tags, as described in `org-html-meta-tags'."
  (let ((title (org-html-plain-text
                (org-element-interpret-data (plist-get info :title)) info))
        (author (and (plist-get info :with-author)
                     (let ((auth (plist-get info :author)))
                       ;; Return raw Org syntax.
                       (and auth (org-html-plain-text
                                  (org-element-interpret-data auth) info))))))
    (append
     (list
      (when (org-string-nw-p author)
        (list "name" "author" author))
      (when (org-string-nw-p (plist-get info :description))
        (list "name" "description"
              (plist-get info :description)))
      '("name" "generator" "org mode")
      '("name" "theme-color" "#77aa99")
      '("property" "og:type" "article")
      (list "property" "og:title" title)
      (let ((subtitle (org-export-data (plist-get info :subtitle) info)))
        (when (org-string-nw-p subtitle)
          (list "property" "og:description" subtitle))))
     (when org-html-meta-tags-opengraph-image
       (list (list "property" "og:image" (plist-get org-html-meta-tags-opengraph-image :image))
             (list "property" "og:image:type" (plist-get org-html-meta-tags-opengraph-image :type))
             (list "property" "og:image:width" (plist-get org-html-meta-tags-opengraph-image :width))
             (list "property" "og:image:height" (plist-get org-html-meta-tags-opengraph-image :height))
             (list "property" "og:image:alt" (plist-get org-html-meta-tags-opengraph-image :alt))))
     (list
      (when (org-string-nw-p author)
        (list "property" "og:article:author:first_name" (car (s-split-up-to " " author 2))))
      (when (and (org-string-nw-p author) (s-contains-p " " author))
        (list "property" "og:article:author:last_name" (cadr (s-split-up-to " " author 2))))
      (list "property" "og:article:published_time"
            (format-time-string
             "%FT%T%z"
             (or
              (when-let ((date-str (cadar (org-collect-keywords '("DATE")))))
                (unless (string= date-str (format-time-string "%F"))
                  (ignore-errors (encode-time (org-parse-time-string date-str)))))
              (if buffer-file-name
                  (file-attribute-modification-time (file-attributes buffer-file-name))
                (current-time)))))
      (when buffer-file-name
        (list "property" "og:article:modified_time"
              (format-time-string "%FT%T%z" (file-attribute-modification-time (file-attributes buffer-file-name)))))))))

(unless (functionp #'org-html-meta-tags-default)
  (defalias 'org-html-meta-tags-default #'ignore))
(setq org-html-meta-tags #'org-html-meta-tags-fancy)
5.3.6.2. Custom CSS/JS

The default org HTML export is … alright, but we can really jazz it up. lepisma.xyz has a really nice style, and from and org export too! Suffice to say I’ve snatched it, with a few of my own tweaks applied.

HTML
#
<link rel="icon" href="https://pratikvn.github.io/mstile-150x150.png" type="image/ico" />

<link rel="preload" as="font" crossorigin="anonymous" type="font/woff2" href="https://pratikvn.github.io/resources/org/etbookot-roman-webfont.woff2">
<link rel="preload" as="font" crossorigin="anonymous" type="font/woff2" href="https://pratikvn.github.io/resources/org/etbookot-italic-webfont.woff2">
<link rel="preload" as="font" crossorigin="anonymous" type="font/woff2" href="https://pratikvn.github.io/resources/org/Merriweather-TextRegular.woff2">
<link rel="preload" as="font" crossorigin="anonymous" type="font/woff2" href="https://pratikvn.github.io/resources/org/Merriweather-TextItalic.woff2">
<link rel="preload" as="font" crossorigin="anonymous" type="font/woff2" href="https://pratikvn.github.io/resources/org/Merriweather-TextBold.woff2">
Emacs Lisp
#
(setq org-html-style-plain org-html-style-default
      org-html-htmlize-output-type 'css
      org-html-doctype "html5"
      org-html-html5-fancy t)

(print doom-private-dir)

(defun org-html-reload-fancy-style ()
  (interactive)
  (setq org-html-style-fancy
        (concat (f-read-text (expand-file-name "misc/org-export-header.html" doom-private-dir))
                "<script>\n"
                (f-read-text (expand-file-name "misc/org-css/main.js" doom-private-dir))
                "</script>\n<style>\n"
                (f-read-text (expand-file-name "misc/org-css/main.min.css" doom-private-dir))
                "</style>"))
  (when org-fancy-html-export-mode
    (setq org-html-style-default org-html-style-fancy)))
(org-html-reload-fancy-style)
5.3.6.3. Collapsable src and example blocks

By wrapping the <pre> element in a <details> block, we can obtain collapsable blocks with no CSS, though we will toss a little in anyway to have this looking somewhat spiffy.

Since this collapsability seems useful to have on by default for certain chunks of code, it would be nice if you could set it with #+attr_html: :collapsed t.

It would be nice to also have a corresponding global / session-local way of setting this, but I haven’t quite been able to get that working (yet).

Emacs Lisp
#
(defvar org-html-export-collapsed nil)
(eval '(cl-pushnew '(:collapsed "COLLAPSED" "collapsed" org-html-export-collapsed t)
                   (org-export-backend-options (org-export-get-backend 'html))))
(add-to-list 'org-default-properties "EXPORT_COLLAPSED")

We can take our src block modification a step further, and add a gutter on the side of the src block containing both an anchor referencing the current block, and a button to copy the content of the block.

Src blocksEmacs Lisp
#
(defadvice! org-html-src-block-collapsable (orig-fn src-block contents info)
  "Wrap the usual <pre> block in a <details>"
  :around #'org-html-src-block
  (if (or (not org-fancy-html-export-mode) (bound-and-true-p org-msg-export-in-progress))
      (funcall orig-fn src-block contents info)
    (let* ((properties (cadr src-block))
           (lang (mode-name-to-lang-name
                  (plist-get properties :language)))
           (name (plist-get properties :name))
           (ref (org-export-get-reference src-block info))
           (collapsed-p (member (or (org-export-read-attribute :attr_html src-block :collapsed)
                                    (plist-get info :collapsed))
                                '("y" "yes" "t" t "true" "all"))))
      (format
       "<details id='%s' class='code'%s><summary%s>%s</summary>
<div class='gutter'>
<a href='#%s'>#</a>
<button title='Copy to clipboard' onclick='copyPreToClipbord(this)'>⎘</button>\
</div>
%s
</details>"
       ref
       (if collapsed-p "" " open")
       (if name " class='named'" "")
       (concat
        (when name (concat "<span class=\"name\">" name "</span>"))
        "<span class=\"lang\">" lang "</span>")
       ref
       (if name
           (replace-regexp-in-string (format "<pre\\( class=\"[^\"]+\"\\)? id=\"%s\">" ref) "<pre\\1>"
                                     (funcall orig-fn src-block contents info))
         (funcall orig-fn src-block contents info))))))

(defun mode-name-to-lang-name (mode)
  (or (cadr (assoc mode
                   '(("asymptote" "Asymptote")
                     ("awk" "Awk")
                     ("C" "C")
                     ("clojure" "Clojure")
                     ("css" "CSS")
                     ("D" "D")
                     ("ditaa" "ditaa")
                     ("dot" "Graphviz")
                     ("calc" "Emacs Calc")
                     ("emacs-lisp" "Emacs Lisp")
                     ("fortran" "Fortran")
                     ("gnuplot" "gnuplot")
                     ("haskell" "Haskell")
                     ("hledger" "hledger")
                     ("java" "Java")
                     ("js" "Javascript")
                     ("latex" "LaTeX")
                     ("ledger" "Ledger")
                     ("lisp" "Lisp")
                     ("lilypond" "Lilypond")
                     ("lua" "Lua")
                     ("matlab" "MATLAB")
                     ("mscgen" "Mscgen")
                     ("ocaml" "Objective Caml")
                     ("octave" "Octave")
                     ("org" "Org mode")
                     ("oz" "OZ")
                     ("plantuml" "Plantuml")
                     ("processing" "Processing.js")
                     ("python" "Python")
                     ("R" "R")
                     ("ruby" "Ruby")
                     ("sass" "Sass")
                     ("scheme" "Scheme")
                     ("screen" "Gnu Screen")
                     ("sed" "Sed")
                     ("sh" "shell")
                     ("sql" "SQL")
                     ("sqlite" "SQLite")
                     ("forth" "Forth")
                     ("io" "IO")
                     ("J" "J")
                     ("makefile" "Makefile")
                     ("maxima" "Maxima")
                     ("perl" "Perl")
                     ("picolisp" "Pico Lisp")
                     ("scala" "Scala")
                     ("shell" "Shell Script")
                     ("ebnf2ps" "ebfn2ps")
                     ("cpp" "C++")
                     ("abc" "ABC")
                     ("coq" "Coq")
                     ("groovy" "Groovy")
                     ("bash" "bash")
                     ("csh" "csh")
                     ("ash" "ash")
                     ("dash" "dash")
                     ("ksh" "ksh")
                     ("mksh" "mksh")
                     ("posh" "posh")
                     ("ada" "Ada")
                     ("asm" "Assembler")
                     ("caml" "Caml")
                     ("delphi" "Delphi")
                     ("html" "HTML")
                     ("idl" "IDL")
                     ("mercury" "Mercury")
                     ("metapost" "MetaPost")
                     ("modula-2" "Modula-2")
                     ("pascal" "Pascal")
                     ("ps" "PostScript")
                     ("prolog" "Prolog")
                     ("simula" "Simula")
                     ("tcl" "tcl")
                     ("tex" "LaTeX")
                     ("plain-tex" "TeX")
                     ("verilog" "Verilog")
                     ("vhdl" "VHDL")
                     ("xml" "XML")
                     ("nxml" "XML")
                     ("conf" "Configuration File"))))
      mode))
Example, fixed width, and property blocksEmacs Lisp
#
(defun org-html-block-collapsable (orig-fn block contents info)
  "Wrap the usual block in a <details>"
  (if (or (not org-fancy-html-export-mode) (bound-and-true-p org-msg-export-in-progress))
      (funcall orig-fn block contents info)
    (let ((ref (org-export-get-reference block info))
          (type (pcase (car block)
                  ('property-drawer "Properties")))
          (collapsed-default (pcase (car block)
                               ('property-drawer t)
                               (_ nil)))
          (collapsed-value (org-export-read-attribute :attr_html block :collapsed))
          (collapsed-p (or (member (org-export-read-attribute :attr_html block :collapsed)
                                   '("y" "yes" "t" t "true"))
                           (member (plist-get info :collapsed) '("all")))))
      (format
       "<details id='%s' class='code'%s>
<summary%s>%s</summary>
<div class='gutter'>\
<a href='#%s'>#</a>
<button title='Copy to clipboard' onclick='copyPreToClipbord(this)'>⎘</button>\
</div>
%s\n
</details>"
       ref
       (if (or collapsed-p collapsed-default) "" " open")
       (if type " class='named'" "")
       (if type (format "<span class='type'>%s</span>" type) "")
       ref
       (funcall orig-fn block contents info)))))

(advice-add 'org-html-example-block   :around #'org-html-block-collapsable)
(advice-add 'org-html-fixed-width     :around #'org-html-block-collapsable)
(advice-add 'org-html-property-drawer :around #'org-html-block-collapsable)
5.3.6.4. Include extra font-locking in htmlize

Org uses htmlize.el to export buffers with syntax highlighting.

The works fantastically, for the most part. Minor modes that provide font-locking are not loaded, and so do not impact the result.

By enabling these modes in htmlize-before-hook we can correct this behaviour.

Emacs Lisp
#
(autoload #'highlight-numbers--turn-on "highlight-numbers")
(add-hook 'htmlize-before-hook #'highlight-numbers--turn-on)
5.3.6.5. Handle table overflow

In order to accommodate wide tables —particularly on mobile devices— we want to set a maximum width and scroll overflow. Unfortunately, this cannot be applied directly to the table element, so we have to wrap it in a div.

While we’re at it, we can a link gutter, as we did with src blocks, and show the #+name, if one is given.

Emacs Lisp
#
(defadvice! org-html-table-wrapped (orig-fn table contents info)
  "Wrap the usual <table> in a <div>"
  :around #'org-html-table
  (if (or (not org-fancy-html-export-mode) (bound-and-true-p org-msg-export-in-progress))
      (funcall orig-fn table contents info)
    (let* ((name (plist-get (cadr table) :name))
           (ref (org-export-get-reference table info)))
      (format "<div id='%s' class='table'>
<div class='gutter'><a href='#%s'>#</a></div>
<div class='tabular'>
%s
</div>\
</div>"
              ref ref
              (if name
                  (replace-regexp-in-string (format "<table id=\"%s\"" ref) "<table"
                                            (funcall orig-fn table contents info))
                (funcall orig-fn table contents info))))))
5.3.6.6. TOC as a collapsable tree

The TOC is much nicer to navigate as a collapsable tree. Unfortunately we cannot achieve this with CSS alone. Thankfully we can avoid JS though, by adapting the TOC generation code to use a label for each item, and a hidden checkbox to keep track of state.

To add this, we need to change one line in .

Since we can actually accomplish the desired effect by adding advice around the function, without overriding it — let’s do that to reduce the bug surface of this config a tad.

Emacs Lisp
#
(defadvice! org-html--format-toc-headline-colapseable (orig-fn headline info)
  "Add a label and checkbox to `org-html--format-toc-headline's usual output,
to allow the TOC to be a collapseable tree."
  :around #'org-html--format-toc-headline
  (if (or (not org-fancy-html-export-mode) (bound-and-true-p org-msg-export-in-progress))
      (funcall orig-fn headline info)
    (let ((id (or (org-element-property :CUSTOM_ID headline)
                  (org-export-get-reference headline info))))
      (format "<input type='checkbox' id='toc--%s'/><label for='toc--%s'>%s</label>"
              id id (funcall orig-fn headline info)))))

Now, leaves (headings with no children) shouldn’t have the label item. The obvious way to achieve this is by including some if no children… logic in org-html--format-toc-headline-colapseable. Unfortunately, I can’t my elisp isn’t up to par to extract the number of child headings from the mountain of info that org provides.

Emacs Lisp
#
(defadvice! org-html--toc-text-stripped-leaves (orig-fn toc-entries)
  "Remove label"
  :around #'org-html--toc-text
  (if (or (not org-fancy-html-export-mode) (bound-and-true-p org-msg-export-in-progress))
      (funcall orig-fn toc-entries)
    (replace-regexp-in-string "<input [^>]+><label [^>]+>\\(.+?\\)</label></li>" "\\1</li>"
                              (funcall orig-fn toc-entries))))
5.3.6.7. Make verbatim different to code

Since we have verbatim and code, let’s make use of the difference.

We can use code exclusively for code snippets and commands like: “calling (message "Hello") in batch-mode Emacs prints to stdout like echo”. Then we can use verbatim for miscellaneous ’other monospace’ like keyboard shortcuts: “either C-c C-c or C-g is likely the most useful keybinding in Emacs”, or file names: “I keep my configuration in ~/.config/doom/”, among other things.

Then, styling these two cases differently can help improve clarity in a document.

Emacs Lisp
#
(setq org-html-text-markup-alist
      '((bold . "<b>%s</b>")
        (code . "<code>%s</code>")
        (italic . "<i>%s</i>")
        (strike-through . "<del>%s</del>")
        (underline . "<span class=\"underline\">%s</span>")
        (verbatim . "<kbd>%s</kbd>")))
5.3.6.8. Change checkbox type

We also want to use HTML checkboxes, however we want to get a bit fancier than default

Emacs Lisp
#
(appendq! org-html-checkbox-types
          '((html-span
             (on . "<span class='checkbox'></span>")
             (off . "<span class='checkbox'></span>")
             (trans . "<span class='checkbox'></span>"))))
(setq org-html-checkbox-type 'html-span)
  • I’m yet to do this
  • Work in progress
  • This is done
5.3.6.9. Extra special strings

The org-html-special-string-regexps variable defines substitutions for:

  • \-, a shy hyphen
  • ---, an em dash
  • --, an en dash
  • ..., (horizontal) ellipses

However I think it would be nice if there was also a substitution for left/right arrows (-> and <-). This is a defconst, but as you may tell from the amount of advice in this config, I’m not above messing with things I’m not ’supposed’ to.

The only minor complication is that < and > are converted to &lt; and &gt; before this stage of output processing.

Emacs Lisp
#
(pushnew! org-html-special-string-regexps
          '("-&gt;" . "&#8594;")
          '("&lt;-" . "&#8592;"))
5.3.6.10. Header anchors

I want to add GitHub-style links on hover for headings.

Emacs Lisp
#
(defun org-export-html-headline-anchor (text backend info)
  (when (and (org-export-derived-backend-p backend 'html)
             (not (org-export-derived-backend-p backend 're-reveal))
             org-fancy-html-export-mode)
    (unless (bound-and-true-p org-msg-export-in-progress)
      (replace-regexp-in-string
       "<h\\([0-9]\\) id=\"\\([a-z0-9-]+\\)\">\\(.*[^ ]\\)<\\/h[0-9]>" ; this is quite restrictive, but due to `org-reference-contraction' I can do this
       "<h\\1 id=\"\\2\">\\3<a aria-hidden=\"true\" href=\"#\\2\">#</a> </h\\1>"
       text))))

(add-to-list 'org-export-filter-headline-functions
             'org-export-html-headline-anchor)
5.3.6.12. LaTeX Rendering
5.3.6.12.1. Pre-rendered

I consider dvisvgm to be a rather compelling option. However this isn’t scaled very well at the moment.

Emacs Lisp
#
;; (setq-default org-html-with-latex `dvisvgm)
5.3.6.12.2. MathJax

If MathJax is used, we want to use version 3 instead of the default version 2. Looking at a comparison we seem to find that it is 5 times as fast, uses a single file instead of multiple, but seems to be a bit bigger unfortunately. Thankfully this can be mitigated my adding the ~async attribute to defer loading.

Emacs Lisp
#
(setq org-html-mathjax-options
      '((path "https://cdn.jsdelivr.net/npm/mathjax@3/es5/tex-svg.js" )
        (scale "1")
        (autonumber "ams")
        (multlinewidth "85%")
        (tagindent ".8em")
        (tagside "right")))

(setq org-html-mathjax-template
      "<script>
MathJax = {
  chtml: {
    scale: %SCALE
  },
  svg: {
    scale: %SCALE,
    fontCache: \"global\"
  },
  tex: {
    tags: \"%AUTONUMBER\",
    multlineWidth: \"%MULTLINEWIDTH\",
    tagSide: \"%TAGSIDE\",
    tagIndent: \"%TAGINDENT\"
  }
};
</script>
<script id=\"MathJax-script\" async
        src=\"%PATH\"></script>")

5.3.7. LaTeX Export

5.3.7.1. Compiling

By default Org uses pdflatex × 3 + bibtex. This simply won’t do in our modern world. latexmk + biber (which is used automatically with latexmk) is a simply superior combination.

Emacs Lisp
#
;; org-latex-compilers = ("pdflatex" "xelatex" "lualatex"), which are the possible values for %latex
(setq org-latex-pdf-process '("LC_ALL=en_US.UTF-8 latexmk -f -pdf -%latex -shell-escape -interaction=nonstopmode -output-directory=%o %f"))

While org-latex-pdf-process does support a function, and we could use that instead, this would no longer use the log buffer — it’s a bit blind, you give it the file name and expect it to do its thing.

The default values of org-latex-compilers is given in commented form to see how org-latex-pdf-process works with them.

While the -%latex above is slightly hacky (-pdflatex expects to be given a value) it allows us to leave org-latex-compilers unmodified. This is nice in case I open an org file that uses #+LATEX_COMPILER for example, it should still work.

5.3.7.2. Nicer checkboxes

We’ll assume that thanks to the clever preamble the various custom \checkbox... commands below are defined.

Emacs Lisp
#
(defun +org-export-latex-fancy-item-checkboxes (text backend info)
  (when (org-export-derived-backend-p backend 'latex)
    (replace-regexp-in-string
     "\\\\item\\[{$\\\\\\(\\w+\\)$}\\]"
     (lambda (fullmatch)
       (concat "\\\\item[" (pcase (substring fullmatch 9 -3) ; content of capture group
                             ("square"   "\\\\checkboxUnchecked")
                             ("boxminus" "\\\\checkboxTransitive")
                             ("boxtimes" "\\\\checkboxChecked")
                             (_ (substring fullmatch 9 -3))) "]"))
     text)))

(add-to-list 'org-export-filter-item-functions
             '+org-export-latex-fancy-item-checkboxes)
5.3.7.3. Class templates

I really like the KOMA bundle. It provides a set of mechanisms to tweak document styling which is both easy to use, and quite comprehensive. For example, I rather like section numbers in the margin, which can be accomplished with

latex-hanging-secnumLaTeX
#
\renewcommand\sectionformat{\llap{\thesection\autodot\enskip}}
\renewcommand\subsectionformat{\llap{\thesubsection\autodot\enskip}}
\renewcommand\subsubsectionformat{\llap{\thesubsubsection\autodot\enskip}}

It can also be nice to have big \chapters.

latex-big-chapterLaTeX
#
\RedeclareSectionCommand[afterindent=false, beforeskip=0pt, afterskip=0pt, innerskip=0pt]{chapter}
\setkomafont{chapter}{\normalfont\Huge}
\renewcommand*{\chapterheadstartvskip}{\vspace*{0\baselineskip}}
\renewcommand*{\chapterheadendvskip}{\vspace*{0\baselineskip}}
\renewcommand*{\chapterformat}{%
  \fontsize{60}{30}\selectfont\rlap{\hspace{6pt}\thechapter}}
\renewcommand*\chapterlinesformat[3]{%
  \parbox[b]{\dimexpr\textwidth-0.5em\relax}{%
    \raggedleft{{\large\scshape\bfseries\chapapp}\vspace{-0.5ex}\par\Huge#3}}%
    \hfill\makebox[0pt][l]{#2}}

Now let’s just sprinkle some KOMA all over the Org LaTeX classes.

Emacs Lisp
#
(after! ox-latex
  (let* ((article-sections '(("\\section{%s}" . "\\section*{%s}")
                             ("\\subsection{%s}" . "\\subsection*{%s}")
                             ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
                             ("\\paragraph{%s}" . "\\paragraph*{%s}")
                             ("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
         (book-sections (append '(("\\chapter{%s}" . "\\chapter*{%s}"))
                                article-sections))
         (hanging-secnum-preamble <<grab("latex-hanging-secnum")>>)
         (big-chap-preamble <<grab("latex-big-chapter">>))
    (setcdr (assoc "article" org-latex-classes)
            `(,(concat "\\documentclass{scrartcl}" hanging-secnum-preamble)
              ,@article-sections))
    (add-to-list 'org-latex-classes
                 `("report" ,(concat "\\documentclass{scrartcl}" hanging-secnum-preamble)
                   ,@article-sections))
    (add-to-list 'org-latex-classes
                 `("book" ,(concat "\\documentclass[twoside=false]{scrbook}"
                                   big-chap-preamble hanging-secnum-preamble)
                   ,@book-sections))
    (add-to-list 'org-latex-classes
                 `("blank" "[NO-DEFAULT-PACKAGES]\n[NO-PACKAGES]\n[EXTRA]"
                   ,@article-sections))
    (add-to-list 'org-latex-classes
                 `("bmc-article" "\\documentclass[article,code,maths]{bmc}\n[NO-DEFAULT-PACKAGES]\n[NO-PACKAGES]\n[EXTRA]"
                   ,@article-sections))
    (add-to-list 'org-latex-classes
                 `("bmc" "\\documentclass[code,maths]{bmc}\n[NO-DEFAULT-PACKAGES]\n[NO-PACKAGES]\n[EXTRA]"
                   ,@book-sections))))

(setq org-latex-tables-booktabs t
      org-latex-hyperref-template
      <<grab("latex-fancy-hyperref")>>
      org-latex-reference-command "\\cref{%s}")

The hyperref setup needs to be handled separately however.

latex-fancy-hyperrefLaTeX
#
\providecolor{url}{HTML}{0077bb}
\providecolor{link}{HTML}{882255}
\providecolor{cite}{HTML}{999933}
\hypersetup{
  pdfauthor={%a},
  pdftitle={%t},
  pdfkeywords={%k},
  pdfsubject={%d},
  pdfcreator={%c},
  pdflang={%L},
  breaklinks=true,
  colorlinks=true,
  linkcolor=link,
  urlcolor=url,
  citecolor=cite
}
\urlstyle{same}
%% hide links styles in toc
\NewCommandCopy{\oldtoc}{\tableofcontents}
\renewcommand{\tableofcontents}{\begingroup\hypersetup{hidelinks}\oldtoc\endgroup}
5.3.7.4. A cleverer preamble
5.3.7.4.1. Use case

We often want particular snippets of LaTeX in our documents preambles. It’s a pain to have to work out / remember them every time. For example, I almost always want to include the snippet below.

org-latex-embed-files-preambleLaTeX
#
\usepackage[main,include]{embedall}
\IfFileExists{./\jobname.org}{\embedfile[desc=The original file]{\jobname.org}}{}

We could have every package we could possibly need in every one of org-latex-classes, but that’s horribly inefficient and I don’t want to think about maintaining that.

Instead we can provide some granularity by splitting up the features we want, and then take the experience to a whole new level by implementing a system to automatically detect which features are desired and generating a preamble that provides these features.

5.3.7.4.2. Conditional Content

Let’s consider content we want in particular situations.

Captions could do with a bit of tweaking such that

  • You can easily have multiple captions
  • Links to figures take you to the top of the figure (not the bottom)
  • Caption labels could do with being emphasised slightly more
  • Multiline captions should run ragged-right, but only when then span more than one line
org-latex-caption-preambleLaTeX
#
\usepackage{subcaption}
\usepackage[hypcap=true]{caption}
\setkomafont{caption}{\sffamily\small}
\setkomafont{captionlabel}{\upshape\bfseries}
\captionsetup{justification=raggedright,singlelinecheck=true}
\usepackage{capt-of} % required by Org

The default checkboxes look rather ugly, so let’s provide some prettier alternatives.

org-latex-checkbox-preambleLaTeX
#
\newcommand{\checkboxUnchecked}{$\square$}
\newcommand{\checkboxTransitive}{\rlap{\raisebox{-0.1ex}{\hspace{0.35ex}\Large\textbf -}}$\square$}
\newcommand{\checkboxChecked}{\rlap{\raisebox{0.2ex}{\hspace{0.35ex}\scriptsize \ding{52}}}$\square$}

We set up a maths typesetting preamble later on, but it would be nice to save it to a variable here:

Emacs Lisp
#
(defvar org-latex-maths-preamble
  <<grab("latex-maths-conveniences")>>
  "Preamble that sets up a bunch of mathematical conveniences.")

It’s nice to have “message blocks”, things like info/warning/error/success. A LaTeX macro should make them trivial to create.

org-latex-box-preambleLaTeX
#
\ExplSyntaxOn
\NewCoffin\Content
\NewCoffin\SideRule
\NewDocumentCommand{\defsimplebox}{O{\ding{117}} O{0.36em} m m m}{%
  % #1 ding, #2 ding offset, #3 name, #4 colour, #5 default label
  \definecolor{#3}{HTML}{#4}
  \NewDocumentEnvironment{#3}{ O{#5} }
  {
    \vcoffin_set:Nnw \Content { \linewidth }
    \noindent \ignorespaces
    \par\vspace{-0.7\baselineskip}%
    \textcolor{#3}{#1}~\textcolor{#3}{\textbf{##1}}%
    \vspace{-0.8\baselineskip}
    \begin{addmargin}[1em]{1em}
    }
    {
    \end{addmargin}
    \vspace{-0.5\baselineskip}
    \vcoffin_set_end:
    \SetHorizontalCoffin\SideRule{\color{#3}\rule{1pt}{\CoffinTotalHeight\Content}}
    \JoinCoffins*\Content[l,t]\SideRule[l,t](#2,-0.7em)
    \noindent\TypesetCoffin\Content
    \vspace*{\CoffinTotalHeight\Content}\bigskip
    \vspace{-2\baselineskip}
  }
}
\ExplSyntaxOff

Lastly, we will pass this content into some global variables we for ease of access.

Emacs Lisp
#
(defvar org-latex-embed-files-preamble
  <<grab("org-latex-embed-files-preamble")>>
  "Preamble that embeds files within the pdf.")

(defvar org-latex-caption-preamble
  <<grab("org-latex-caption-preamble")>>
  "Preamble that improves captions.")

(defvar org-latex-checkbox-preamble
  <<grab("org-latex-checkbox-preamble")>>
  "Preamble that improves checkboxes.")

(defvar org-latex-box-preamble
  <<grab("org-latex-box-preamble")>>
  "Preamble that provides a macro for custom boxes.")

In the “universal preamble”, we already embed the source .org file, but it would be nice to embed all the tangled files. This is fairly easy to accomplish by mapping each tangled file to a form which embeds the file if it exists. Considering we’re going this far, why not add a dedicated #+emded keyword, so we can embed whatever we want.

Emacs Lisp
#
(defun org-latex-embed-extra-files ()
  "Return a string that uses embedfile to embed all tangled files."
  (mapconcat
   (lambda (file-desc)
     (format "\\IfFileExists{%1$s}{\\embedfile[desc=%2$s]{%1$s}}{}"
             (thread-last (car file-desc)
                          (replace-regexp-in-string "\\\\" "\\\\\\\\")
                          (replace-regexp-in-string "~" "\\\\string~"))
             (cdr file-desc)))
   (append
    (let (tangle-fspecs) ; All files being tangled to.
      (org-element-cache-map
       (lambda (src)
         (when (and (not (org-in-commented-heading-p nil src))
                    (not (org-in-archived-heading-p nil src)))
           (when-let ((lang (org-element-property :language src))
                      (params
                       (apply
                        #'org-babel-merge-params
                        (append
                         (org-with-point-at (org-element-property :begin src)
                           (org-babel-params-from-properties lang t))
                         (mapcar
                          (lambda (h)
                            (org-babel-parse-header-arguments h t))
                          (cons (org-element-property :parameters src)
                                (org-element-property :header src))))))
                      (tangle-value
                       (pcase (alist-get :tangle params)
                         ((and (pred stringp) (pred (string-match-p "^(.*)$")) expr)
                          (eval (read expr)))
                         (val val)))
                      (tangle-file
                       (pcase tangle-value
                         ((or "no" (guard (member (alist-get :export-embed params) '("no" "nil"))))
                          nil)
                         ("yes"
                          (file-name-with-extension
                           (file-name-nondirectory (buffer-file-name))
                           (or (alist-get lang org-babel-tangle-lang-exts nil nil #'equal)
                               lang)))
                         (val val))))
             (unless (assoc tangle-file tangle-fspecs)
               (push
                (cons tangle-file (format "Tangled %s file" lang))
                tangle-fspecs)))))
       :granularity 'element
       :restrict-elements '(src-block))
      (nreverse tangle-fspecs))
    (let (extra-files)
      (save-excursion
        (goto-char (point-min))
        (while (re-search-forward "^[ \t]*#\\+embed:" nil t)
          (let* ((file-desc (split-string (org-element-property :value (org-element-at-point)) " :desc\\(?:ription\\)? ")))
            (push (cons (car file-desc) (or (cdr file-desc) "Extra file")) extra-files))))
      (nreverse extra-files)))
   "\n"))

Now all tangled files will be embedded, and we can embed arbitrary files like so:

Org mode
#
#+embed: some-file :description flavour text about the file

This currently won’t complete or anything like that, as we haven’t told Org that it’s a keyword yet. It’s also LaTeX-specific, so maybe it should be changed to #+latex_embed or something like that.

5.3.7.4.3. Content-feature-preamble association

Initially this idea was implemented with an alist that associated a construct that would search the current Org file for an indication that some feature was needed, with a LaTeX snippet to be inserted in the preamble which would provide that feature. This is all well and good when there is a bijection between detected features and the LaTeX code needed to support those features, but in many cases this relation is not injective.

To better model the reality of the situation, I add an extra layer to this process where each detected feature gives a list of required “feature flags”. Simply be merging the lists of feature flags we no longer have to require injectivity to avoid LaTeX duplication. Then the extra layer forms a bijection between there feature flags and a specification which can be used to implement the feature.

This model also provides a number of nice secondary benefits, such as a simple implementation of feature dependency.

DAG showing how Org features flow through to LaTeX
Figure 3: Association between Org features, feature flags, and LaTeX snippets required.

First we will implement the feature detection component of this model. I’d like this to be able to use as much state information as possible, so the feature tests should be very versatile.

Emacs Lisp
#
(defvar org-latex-embed-files t
  "Embed the source .org, .tex, and any tangled files.")
(defvar org-latex-use-microtype t
  "Use the microtype pakage.")
(defvar org-latex-italic-quotes t
  "Make \"quote\" environments italic.")
(defvar org-latex-par-sep t
  "Vertically seperate paragraphs, and remove indentation.")

(pushnew!
 org-export-conditional-features
 '("\\\\(\\|\\\\\\[\\|\\\\begin{\\(?:math\\|displaymath\\|equation\\|align\\|flalign\\|multiline\\|gather\\)[a-z]*\\*?}" . maths)
 '("cref:\\|\\cref{\\|\\[\\[[^\\]+\n?[^\\]\\]\\]" . cleveref)
 '("[;\\\\]?\\b[A-Z][A-Z]+s?[^A-Za-z]" . acronym)
 '("[\u2500-\u259F]" . box-drawing)
 '("\\+[^ ].*[^ ]\\+\\|_[^ ].*[^ ]_\\|\\\\uu?line\\|\\\\uwave\\|\\\\sout\\|\\\\xout\\|\\\\dashuline\\|\\dotuline\\|\\markoverwith" . underline)
 '(":float wrap" . float-wrap)
 '(":float sideways" . rotate)
 '("^[ \t]*#\\+caption:\\|\\\\caption" . caption)
 '("\\[\\[xkcd:" . (image caption))
 '(org-latex-use-microtype . microtype)
 (cons (lambda (_info) (and org-latex-italic-quotes "^[ \t]*#\\+begin_quote\\|\\\\begin{quote}")) 'italic-quotes)
 '(org-latex-par-sep . par-sep)
 '(org-latex-embed-files . embed-files)
 (cons (lambda (_info) (and org-latex-embed-files "^[ \t]*#\\+embed\\|^[ \t]*#\\+begin_src\\|^[ \t]*#\\+BEGIN_SRC")) 'embed-tangled)
 '("^[ \t]*\\(?:[-+*]\\|[0-9]+[.)]\\|[A-Za-z]+[.)]\\) \\[[ -X]\\]" . checkbox)
 '("^[ \t]*#\\+begin_warning\\|\\\\begin{warning}" . box-warning)
 '("^[ \t]*#\\+begin_info\\|\\\\begin{info}"       . box-info)
 '("^[ \t]*#\\+begin_notes\\|\\\\begin{notes}"     . box-notes)
 '("^[ \t]*#\\+begin_success\\|\\\\begin{success}" . box-success)
 '("^[ \t]*#\\+begin_error\\|\\\\begin{error}"     . box-error))

Then we provide a way to generate the preamble that provides those features. In addition to the features named in org-latex-conditional-features we’ll also create meta-features, which can be required by other features (with :requires), or be active by default (:eager t). For further control I some features may only be used when certain other features are active (with :when), and masked by other features (with :prevents). I will use the convention of starting meta-features with ., and :eager features with ! to make their nature more readily apparent.

Another consideration in LaTeX is load order, which matters in some cases. Beyond that, it’s nice to have some sort of sensible ordering. For this I’ll introduce an :order keyword. Using this I’ll arrange snippets as follows.

  • -2 Embed files setup
  • -1 Extra file embedding
  • 0 Typography
    • 0 Fonts themselves
    • 0.1 Typographic tweaks (microtype)
    • 0.2 Maths setup
    • 0.3 Maths font
    • 0.4 Extra text shaping (\acr)
    • 0.5-0.9 Miscellaneous text modifications, trying to put shorter snippets first
  • 1 (default)
  • 2 Tables and figures
  • 3 Miscellaneous short content
  • 4 Fancy boxes
Emacs Lisp
#
(pushnew!
 org-latex-feature-implementations
 '(image         :snippet "\\usepackage{graphicx}" :order 2)
 '(svg           :snippet "\\usepackage[inkscapelatex=false]{svg}" :order 2)
 '(table         :snippet "\\usepackage{longtable}\n\\usepackage{booktabs}" :order 2)
 '(maths         :snippet org-latex-maths-preamble :order 0.2)
 '(cleveref      :snippet "\\usepackage[capitalize]{cleveref}" :order 1) ; after bmc-maths
 '(float-wrap    :snippet "\\usepackage{wrapfig}" :order 2)
 '(rotate        :snippet "\\usepackage{rotating}" :order 2)
 '(caption       :snippet org-latex-caption-preamble :order 2.1)
 '(microtype     :snippet "\\usepackage[activate={true,nocompatibility},final,tracking=true,kerning=true,spacing=true,factor=2000]{microtype}\n" :order 0.1)
 '(embed-files   :snippet org-latex-embed-files-preamble :order -2)
 `(embed-tangled :requires embed-files :snippet ,(lambda (_info) (concat (org-latex-embed-extra-files) "\n")) :order -1)
 '(acronym       :snippet "\\newcommand{\\acr}[1]{\\protect\\textls*[110]{\\scshape #1}}\n\\newcommand{\\acrs}{\\protect\\scalebox{.91}[.84]{\\hspace{0.15ex}s}}" :order 0.4)
 '(box-drawing   :snippet "\\usepackage{pmboxdraw}" :order 0.05)
 '(italic-quotes :snippet "\\renewcommand{\\quote}{\\list{}{\\rightmargin\\leftmargin}\\item\\relax\\em}\n" :order 0.5)
 '(par-sep       :snippet "\\setlength{\\parskip}{\\baselineskip}\n\\setlength{\\parindent}{0pt}\n" :order 0.5)
 '(.pifont       :snippet "\\usepackage{pifont}")
 '(.xcoffins     :snippet "\\usepackage{xcoffins}")
 `(checkbox      :requires .pifont :order 3
   :snippet ,(lambda (_info)
               (concat (unless (memq 'maths features)
                         "\\usepackage{amssymb} % provides \\square")
                       org-latex-checkbox-preamble)))
 '(.fancy-box    :requires (.pifont .xcoffins) :snippet org-latex-box-preamble :order 3.9)
 '(box-warning   :requires .fancy-box :snippet "\\defsimplebox{warning}{e66100}{Warning}" :order 4)
 '(box-info      :requires .fancy-box :snippet "\\defsimplebox{info}{3584e4}{Information}" :order 4)
 '(box-notes     :requires .fancy-box :snippet "\\defsimplebox{notes}{26a269}{Notes}" :order 4)
 '(box-success   :requires .fancy-box :snippet "\\defsimplebox{success}{26a269}{\\vspace{-\\baselineskip}}" :order 4)
 '(box-error     :requires .fancy-box :snippet "\\defsimplebox{error}{c01c28}{Important}" :order 4))
5.3.7.4.4. Reduce default packages

Thanks to our additions, we can remove a few packages from org-latex-default-packages-alist.

There are also some obsolete entries in the default value, specifically

  • grffile’s capabilities are built into the current version of graphicx
  • textcomp’s functionality has been included in LaTeX’s core for a while now
Emacs Lisp
#
(setq org-latex-default-packages-alist
      '(("AUTO" "inputenc" t ("pdflatex"))
        ("T1" "fontenc" t ("pdflatex"))
        ("" "xcolor" t) ; Generally useful
        ("" "hyperref" nil)))
5.3.7.5. Font collections

Using the lovely conditional preamble, I’ll define a number of font collections that can be used for LaTeX exports. Who knows, maybe I’ll use it with other export formats too at some point.

To start with I’ll create a default state variable and register fontset as part of #+options.

Emacs Lisp
#
(defvar org-latex-default-fontset 'alegreya
  "Fontset from `org-latex-fontsets' to use by default.
As cm (computer modern) is TeX's default, that causes nothing
to be added to the document.

If \"nil\" no custom fonts will ever be used.")

(eval '(cl-pushnew '(:latex-font-set nil "fontset" org-latex-default-fontset)
                   (org-export-backend-options (org-export-get-backend 'latex))))

Then a function is needed to generate a LaTeX snippet which applies the fontset. It would be nice if this could be done for individual styles and use different styles as the main document font. If the individual typefaces for a fontset are defined individually as :serif, :sans, :mono, and :maths. I can use those to generate LaTeX for subsets of the full fontset. Then, if I don’t let any fontset names have - in them, I can use -sans and -mono as suffixes that specify the document font to use.

Emacs Lisp
#
(defun org-latex-fontset-entry ()
  "Get the fontset spec of the current file.
Has format \"name\" or \"name-style\" where 'name' is one of
the cars in `org-latex-fontsets'."
  (let ((fontset-spec
         (symbol-name
          (or (car (delq nil
                         (mapcar
                          (lambda (opt-line)
                            (plist-get (org-export--parse-option-keyword opt-line 'latex)
                                       :latex-font-set))
                          (cdar (org-collect-keywords '("OPTIONS"))))))
              org-latex-default-fontset))))
    (cons (intern (car (split-string fontset-spec "-")))
          (when (cadr (split-string fontset-spec "-"))
            (intern (concat ":" (cadr (split-string fontset-spec "-"))))))))

(defun org-latex-fontset (&rest desired-styles)
  "Generate a LaTeX preamble snippet which applies the current fontset for DESIRED-STYLES."
  (let* ((fontset-spec (org-latex-fontset-entry))
         (fontset (alist-get (car fontset-spec) org-latex-fontsets)))
    (if fontset
        (concat
         (mapconcat
          (lambda (style)
            (when (plist-get fontset style)
              (concat (plist-get fontset style) "\n")))
          desired-styles
          "")
         (when (memq (cdr fontset-spec) desired-styles)
           (pcase (cdr fontset-spec)
             (:serif "\\renewcommand{\\familydefault}{\\rmdefault}\n")
             (:sans "\\renewcommand{\\familydefault}{\\sfdefault}\n")
             (:mono "\\renewcommand{\\familydefault}{\\ttdefault}\n"))))
      (error "Font-set %s is not provided in org-latex-fontsets" (car fontset-spec)))))

Now that all the functionality has been implemented, we should hook it into our preamble generation.

Emacs Lisp
#
(add-to-list 'org-export-conditional-features '(org-latex-default-fontset . custom-font) t)
(add-to-list 'org-latex-feature-implementations (list 'custom-font :snippet (lambda (_info) (org-latex-fontset :serif :sans :mono)) :order 0) t)
(add-to-list 'org-latex-feature-implementations (list '.custom-maths-font :eager t :when '(custom-font maths) :snippet (lambda (_info) (org-latex-fontset :maths)) :order 0.3) t)

Finally, we just need to add some fonts.

Emacs Lisp
#
(defvar org-latex-fontsets
  '((cm nil) ; computer modern
    (## nil) ; no font set
    (alegreya
     :serif "\\usepackage[osf]{Alegreya}"
     :sans "\\usepackage{AlegreyaSans}"
     :mono "\\usepackage[scale=0.88]{sourcecodepro}"
     :maths "\\usepackage[varbb]{newpxmath}")
    (biolinum
     :serif "\\usepackage[osf]{libertineRoman}"
     :sans "\\usepackage[sfdefault,osf]{biolinum}"
     :mono "\\usepackage[scale=0.88]{sourcecodepro}"
     :maths "\\usepackage[libertine,varvw]{newtxmath}")
    (fira
     :sans "\\usepackage[sfdefault,scale=0.85]{FiraSans}"
     :mono "\\usepackage[scale=0.80]{FiraMono}"
     :maths "\\usepackage{newtxsf} % change to firamath in future?")
    (kp
     :serif "\\usepackage{kpfonts}")
    (newpx
     :serif "\\usepackage{newpxtext}"
     :sans "\\usepackage{gillius}"
     :mono "\\usepackage[scale=0.9]{sourcecodepro}"
     :maths "\\usepackage[varbb]{newpxmath}")
    (noto
     :serif "\\usepackage[osf]{noto-serif}"
     :sans "\\usepackage[osf]{noto-sans}"
     :mono "\\usepackage[scale=0.96]{noto-mono}"
     :maths "\\usepackage{notomath}")
    (plex
     :serif "\\usepackage{plex-serif}"
     :sans "\\usepackage{plex-sans}"
     :mono "\\usepackage[scale=0.95]{plex-mono}"
     :maths "\\usepackage{newtxmath}") ; may be plex-based in future
    (source
     :serif "\\usepackage[osf,semibold]{sourceserifpro}"
     :sans "\\usepackage[osf,semibold]{sourcesanspro}"
     :mono "\\usepackage[scale=0.92]{sourcecodepro}"
     :maths "\\usepackage{newtxmath}") ; may be sourceserifpro-based in future
    (times
     :serif "\\usepackage{newtxtext}"
     :maths "\\usepackage{newtxmath}"))
  "Alist of fontset specifications.
Each car is the name of the fontset (which cannot include \"-\").

Each cdr is a plist with (optional) keys :serif, :sans, :mono, and :maths.
A key's value is a LaTeX snippet which loads such a font.")

When we’re using Alegreya we can apply a lovely little tweak to tabular which (locally) changes the figures used to lining fixed-width.

Emacs Lisp
#
(add-to-list 'org-export-conditional-features (list (lambda (_info) (string= (car (org-latex-fontset-entry)) "alegreya")) 'alegreya-typeface))
(add-to-list 'org-latex-feature-implementations '(alegreya-typeface) t)
(add-to-list 'org-latex-feature-implementations'(.alegreya-tabular-figures :eager t :when (alegreya-typeface table) :order 0.5 :snippet "
\\makeatletter
% tabular lining figures in tables
\\renewcommand{\\tabular}{\\AlegreyaTLF\\let\\@halignto\\@empty\\@tabular}
\\makeatother\n") t)

Due to Alegreya’s metrics, the \LaTeX symbol doesn’t quite look right. We can correct for this by redefining it with subtlety shifted kerning.

Emacs Lisp
#
(add-to-list 'org-export-conditional-features '("LaTeX" . latex-symbol))
(add-to-list 'org-latex-feature-implementations '(latex-symbol :when alegreya-typeface :order 0.5 :snippet "
\\makeatletter
% Kerning around the A needs adjusting
\\DeclareRobustCommand{\\LaTeX}{L\\kern-.24em%
        {\\sbox\\z@ T%
         \\vbox to\\ht\\z@{\\hbox{\\check@mathfonts
                              \\fontsize\\sf@size\\z@
                              \\math@fontsfalse\\selectfont
                              A}%
                        \\vss}%
        }%
        \\kern-.10em%
        \\TeX}
\\makeatother\n") t)
5.3.7.6. Maths notation conveniences

Maths has a way of popping up relentlessly. I think this says something both about me and the subject itself. While the LaTeX set of commands is quite reasonable, we can make a few common bits of notation a tad more convenient.

5.3.7.6.1. Packages

First, there are a few useful packages we want to use.

LaTeX
#
%% Maths-related packages
% More maths environments, commands, and symbols.
\usepackage{amsmath, amssymb}
% Slanted fractions with \sfrac{a}{b}, in text and maths.
\usepackage{xfrac}
% Visually cancel expressions with \cancel{value} and \cancelto{expression}{value}
\usepackage[makeroom]{cancel}
% Improvements on amsmath and utilities for mathematical typesetting
\usepackage{mathtools}
5.3.7.6.2. Custom delimiters

Next up we want to make the various types of rounding-related and absolute value delimitors accessible as commands.

LaTeX
#
% Deliminators
\DeclarePairedDelimiter{\abs}{\lvert}{\rvert}
\DeclarePairedDelimiter{\norm}{\lVert}{\rVert}

\DeclarePairedDelimiter{\ceil}{\lceil}{\rceil}
\DeclarePairedDelimiter{\floor}{\lfloor}{\rfloor}
\DeclarePairedDelimiter{\round}{\lfloor}{\rceil}
5.3.7.6.3. Number sets

Then we have the various common number sets, it would be nice to have a convenient way of typing them and optionally giving them powers. It’s fairly easy to support both \XX and \XX[n].

LaTeX
#
\newcommand{\RR}[1][]{\ensuremath{\ifstrempty{#1}{\mathbb{R}}{\mathbb{R}^{#1}}}} % Real numbers
\newcommand{\NN}[1][]{\ensuremath{\ifstrempty{#1}{\mathbb{N}}{\mathbb{N}^{#1}}}} % Natural numbers
\newcommand{\ZZ}[1][]{\ensuremath{\ifstrempty{#1}{\mathbb{Z}}{\mathbb{Z}^{#1}}}} % Integer numbers
\newcommand{\QQ}[1][]{\ensuremath{\ifstrempty{#1}{\mathbb{Q}}{\mathbb{Q}^{#1}}}} % Rational numbers
\newcommand{\CC}[1][]{\ensuremath{\ifstrempty{#1}{\mathbb{C}}{\mathbb{C}^{#1}}}} % Complex numbers
5.3.7.6.4. Derivatives

Derivatives are actually a bit of a pain to typeset, it would be nice to have a \dv command that supports:

  • \dv{x} for the derivative with respect to x
  • \dv{f}{x} for the derivative of f with respect to x
  • \dv[2]{f}{x} for the second order derivative of f with respect to x

Similarly, it would be nice to have a partial derivate counterpart \pdv which behaves in a similar way, but with the possibility of providing multiple comma-delimited variables — e.g. \pdv{f}{x,y,z}.

LaTeX
#
% Easy derivatives
\ProvideDocumentCommand\dv{o m g}{%
  \IfNoValueTF{#3}{%
    \dv[#1]{}{#2}}{%
    \IfNoValueTF{#1}{%
      \frac{\dd #2}{\dd #3}%
    }{\frac{\dd[#1] #2}{\dd {#3}^{#1}}}}}
% Easy partial derivatives
\ExplSyntaxOn
\ProvideDocumentCommand\pdv{o m g}{%
  \IfNoValueTF{#3}{\pdv[#1]{}{#2}}%
  {\ifnum\clist_count:n{#3}<2
    \IfValueTF{#1}{\frac{\partial^{#1} #2}{\partial {#3}^{#1}}}%
    {\frac{\partial #2}{\partial #3}}
    \else
    \frac{\IfValueTF{#1}{\partial^{#1}}{\partial^{\clist_count:n{#3}}}#2}%
    {\clist_map_inline:nn{#3}{\partial ##1 \,}\!}
    \fi}}
\ExplSyntaxOff
5.3.7.6.5. Common operators

The default set of operators could benefit from a bit of expansion.

LaTeX
#
% Laplacian
\DeclareMathOperator{\Lap}{\mathcal{L}}

% Statistics
\DeclareMathOperator{\Var}{Var} % varience
\DeclareMathOperator{\Cov}{Cov} % covarience
\newcommand{\EE}{\ensuremath{\mathbb{E}}} % expected value
\DeclareMathOperator{\E}{E} % expected value
5.3.7.6.6. Slanted inequalities

As a matter of personal taste, I prefer the slanted less/greater than or equal to operators, and would like to use them by default.

LaTeX
#
% I prefer the slanted \leq/\geq
\let\barleq\leq % Save them in case they're every wanted
\let\bargeq\geq
\renewcommand{\leq}{\leqslant}
\renewcommand{\geq}{\geqslant}
5.3.7.6.7. Alignment of matrix columns

By default, everything in a matrix is centred, which I actually find often undesirable. It would be much nicer to take the alignment as an optional argument of the environment, and default to right-alignment.

LaTeX
#
% Redefine the matrix environment to allow for alignment
% via an optional argument, and use r as the default.
\makeatletter
\renewcommand*\env@matrix[1][r]{\hskip -\arraycolsep%
    \let\@ifnextchar\new@ifnextchar
    \array{*\c@MaxMatrixCols #1}}
\makeatother
5.3.7.6.8. Slanted derivative “d”

Determining an appropriate styling for a derivative “d” (e.g. “dx”) is surprisingly hard, as the “d” is neither:

  • An operator (which are typeset as upright roman)
  • A variable (which are typeset as italic roman)

The ISO 80000-2 standard (2009) specifies that it should be upright, however (a) it is still not an operator, (b) not used in any maths book I’ve seen, and (c) doesn’t look very good. I’m not entirely comfortable with the variable styling either though, so perhaps something else is in order?

After trying a few different options, I rather like the idea of using a slanted roman “d”. This stylistically works for me, while being just distinct enough from other faces. As long as we are creating a PDF, we can apply a transform that slants a “d”.

LaTeX
#
% Slanted roman "d" for derivatives
\ifcsname pdfoutput\endcsname
  \ifnum\pdfoutput>0 % PDF
    \newsavebox\diffdbox{}
    \newcommand{\slantedromand}{{\mathpalette\makesl{d}}}
    \newcommand{\makesl}[2]{%
      \begingroup
      \sbox{\diffdbox}{$\mathsurround=0pt#1\mathrm{#2}$}%
      \pdfsave%
      \pdfsetmatrix{1 0 0.2 1}%
      \rlap{\usebox{\diffdbox}}%
      \pdfrestore%
      \hskip\wd\diffdbox%
      \endgroup}
  \else % DVI
    \newcommand{\slantedromand}{d} % fallback
  \fi
\else % Also DVI
  \newcommand{\slantedromand}{d} % fallback
\fi

Now there’s the matter of placing the “d”, or rather adjusting the space around it. After much fiddling, I’ve ended up with the following.

LaTeX
#
% Derivative d^n, nicely spaced
\makeatletter
\newcommand{\dd}[1][]{\mathop{}\!%
  \expandafter\ifx\expandafter&\detokenize{#1}&% \ifstrempty from etoolbox
    \slantedromand\@ifnextchar^{\hspace{0.2ex}}{\hspace{0.1ex}}
  \else
    \slantedromand\hspace{0.2ex}^{#1}
  \fi}
\makeatother

While \dd isn’t much effort to type, it would be much cleaner to be able to do . The problem with defining \d is that it is already used for the under-dot accent. However, since this is a text-mode (only) accent, and defined with instead of we can redefine the command to mean \dd in math-mode.

LaTeX
#
\NewCommandCopy{\daccent}{\d}
\renewcommand{\d}{\ifmmode\dd\else\daccent\fi}
5.3.7.7. Cover page

To make a nice cover page, a simple method that comes to mind is just redefining \maketitle. To get precise control over the positioning we’ll use the tikz package, and then add in the Tikz libraries calc and shapes.geometric to make some nice decorations for the background.

I’ll start off by setting up the required additions to the preamble. This will accomplish the following:

  • Load the required packages
  • Redefine \maketitle
  • Draw an Org icon with Tikz to use in the cover page (it’s a little easter egg)
  • Start a new page after the table of contents by redefining \tableofcontents
latex-cover-pageLaTeX
#
\usepackage{tikz}
\usetikzlibrary{shapes.geometric}
\usetikzlibrary{calc}

\newsavebox\orgicon
\begin{lrbox}{\orgicon}
  \begin{tikzpicture}[y=0.80pt, x=0.80pt, inner sep=0pt, outer sep=0pt]
    \path[fill=black!6] (16.15,24.00) .. controls (15.58,24.00) and (13.99,20.69) .. (12.77,18.06)arc(215.55:180.20:2.19) .. controls (12.33,19.91) and (11.27,19.09) .. (11.43,18.05) .. controls (11.36,18.09) and (10.17,17.83) .. (10.17,17.82) .. controls (9.94,18.75) and (9.37,19.44) .. (9.02,18.39) .. controls (8.32,16.72) and (8.14,15.40) .. (9.13,13.80) .. controls (8.22,9.74) and (2.18,7.75) .. (2.81,4.47) .. controls (2.99,4.47) and (4.45,0.99) .. (9.15,2.41) .. controls (14.71,3.99) and (17.77,0.30) .. (18.13,0.04) .. controls (18.65,-0.49) and (16.78,4.61) .. (12.83,6.90) .. controls (10.49,8.18) and (11.96,10.38) .. (12.12,11.15) .. controls (12.12,11.15) and (14.00,9.84) .. (15.36,11.85) .. controls (16.58,11.53) and (17.40,12.07) .. (18.46,11.69) .. controls (19.10,11.41) and (21.79,11.58) .. (20.79,13.08) .. controls (20.79,13.08) and (21.71,13.90) .. (21.80,13.99) .. controls (21.97,14.75) and (21.59,14.91) .. (21.47,15.12) .. controls (21.44,15.60) and (21.04,15.79) .. (20.55,15.44) .. controls (19.45,15.64) and (18.36,15.55) .. (17.83,15.59) .. controls (16.65,15.76) and (15.67,16.38) .. (15.67,16.38) .. controls (15.40,17.19) and (14.82,17.01) .. (14.09,17.32) .. controls (14.70,18.69) and (14.76,19.32) .. (15.50,21.32) .. controls (15.76,22.37) and (16.54,24.00) .. (16.15,24.00) -- cycle(7.83,16.74) .. controls (6.83,15.71) and (5.72,15.70) .. (4.05,15.42) .. controls (2.75,15.19) and (0.39,12.97) .. (0.02,10.68) .. controls (-0.02,10.07) and (-0.06,8.50) .. (0.45,7.18) .. controls (0.94,6.05) and (1.27,5.45) .. (2.29,4.85) .. controls (1.41,8.02) and (7.59,10.18) .. (8.55,13.80) -- (8.55,13.80) .. controls (7.73,15.00) and (7.80,15.64) .. (7.83,16.74) -- cycle;
  \end{tikzpicture}
\end{lrbox}

\makeatletter
\g@addto@macro\tableofcontents{\clearpage}
\renewcommand\maketitle{
  \thispagestyle{empty}
  \hyphenpenalty=10000 % hyphens look bad in titles
  \renewcommand{\baselinestretch}{1.1}
  \NewCommandCopy{\oldtoday}{\today}
  \renewcommand{\today}{\LARGE\number\year\\\large%
    \ifcase \month \or Jan\or Feb\or Mar\or Apr\or May \or Jun\or Jul\or Aug\or Sep\or Oct\or Nov\or Dec\fi
    ~\number\day}
  \begin{tikzpicture}[remember picture,overlay]
    %% Background Polygons %%
    \foreach \i in {2.5,...,22} % bottom left
    {\node[rounded corners,black!3.5,draw,regular polygon,regular polygon sides=6, minimum size=\i cm,ultra thick] at ($(current page.west)+(2.5,-4.2)$) {} ;}
    \foreach \i in {0.5,...,22} % top left
    {\node[rounded corners,black!5,draw,regular polygon,regular polygon sides=6, minimum size=\i cm,ultra thick] at ($(current page.north west)+(2.5,2)$) {} ;}
    \node[rounded corners,fill=black!4,regular polygon,regular polygon sides=6, minimum size=5.5 cm,ultra thick] at ($(current page.north west)+(2.5,2)$) {};
    \foreach \i in {0.5,...,24} % top right
    {\node[rounded corners,black!2,draw,regular polygon,regular polygon sides=6, minimum size=\i cm,ultra thick] at ($(current page.north east)+(0,-8.5)$) {} ;}
    \node[fill=black!3,rounded corners,regular polygon,regular polygon sides=6, minimum size=2.5 cm,ultra thick] at ($(current page.north east)+(0,-8.5)$) {};
    \foreach \i in {21,...,3} % bottom right
    {\node[black!3,rounded corners,draw,regular polygon,regular polygon sides=6, minimum size=\i cm,ultra thick] at ($(current page.south east)+(-1.5,0.75)$) {} ;}
    \node[fill=black!3,rounded corners,regular polygon,regular polygon sides=6, minimum size=2 cm,ultra thick] at ($(current page.south east)+(-1.5,0.75)$) {};
    \node[align=center, scale=1.4] at ($(current page.south east)+(-1.5,0.75)$) {\usebox\orgicon};
    %% Text %%
    \node[left, align=right, black, text width=0.8\paperwidth, minimum height=3cm, rounded corners,font=\Huge\bfseries] at ($(current page.north east)+(-2,-8.5)$)
    {\@title};
    \node[left, align=right, black, text width=0.8\paperwidth, minimum height=2cm, rounded corners, font=\Large] at ($(current page.north east)+(-2,-11.8)$)
    {\scshape \@author};
    \renewcommand{\baselinestretch}{0.75}
    \node[align=center,rounded corners,fill=black!3,text=black,regular polygon,regular polygon sides=6, minimum size=2.5 cm,inner sep=0, font=\Large\bfseries ] at ($(current page.west)+(2.5,-4.2)$)
    {\@date};
  \end{tikzpicture}
  \let\today\oldtoday
  \clearpage}
\makeatother

Now we’ve got a nice cover page to work with, we just need to use it every now and then. Adding this to #+options feels most appropriate. Let’s have the coverpage option accept auto as a value and then decide whether or not a cover page should be used based on the word count — I’ll have this be the global default. Then we just want to insert a LaTeX snippet tweak the subtitle format to use the cover page.

Emacs Lisp
#
(defvar org-latex-cover-page 'auto
  "When t, use a cover page by default.
When auto, use a cover page when the document's wordcount exceeds
`org-latex-cover-page-wordcount-threshold'.

Set with #+option: coverpage:{yes,auto,no} in org buffers.")
(defvar org-latex-cover-page-wordcount-threshold 5000
  "Document word count at which a cover page will be used automatically.
This condition is applied when cover page option is set to auto.")
(defvar org-latex-subtitle-coverpage-format "\\\\\\bigskip\n\\LARGE\\mdseries\\itshape\\color{black!80} %s\\par"
  "Variant of `org-latex-subtitle-format' to use with the cover page.")
(defvar org-latex-cover-page-maketitle
  <<grab("latex-cover-page")>>
  "LaTeX preamble snippet that sets \\maketitle to produce a cover page.")

(eval '(cl-pushnew '(:latex-cover-page nil "coverpage" org-latex-cover-page)
                   (org-export-backend-options (org-export-get-backend 'latex))))

(defun org-latex-cover-page-p ()
  "Whether a cover page should be used when exporting this Org file."
  (pcase (or (car
              (delq nil
                    (mapcar
                     (lambda (opt-line)
                       (plist-get (org-export--parse-option-keyword opt-line 'latex) :latex-cover-page))
                     (cdar (org-collect-keywords '("OPTIONS"))))))
             org-latex-cover-page)
    ((or 't 'yes) t)
    ('auto (when (> (count-words (point-min) (point-max)) org-latex-cover-page-wordcount-threshold) t))
    (_ nil)))

(defadvice! org-latex-set-coverpage-subtitle-format-a (contents info)
  "Set the subtitle format when a cover page is being used."
  :before #'org-latex-template
  (when (org-latex-cover-page-p)
    (setf info (plist-put info :latex-subtitle-format org-latex-subtitle-coverpage-format))))

(add-to-list 'org-latex-feature-implementations '(cover-page :snippet org-latex-cover-page-maketitle :order 9) t)
(add-to-list 'org-export-conditional-features (cons (lambda (_info) (org-latex-cover-page-p)) 'cover-page) t)
5.3.7.8. Condensed lists

LaTeX is generally pretty good by default, but it’s really generous with how much space it puts between list items by default. I’m generally not a fan.

Thankfully this is easy to correct with a small snippet:

latex-condense-listsLaTeX
#
\newcommand{\setuplistspacing}{\setlength{\itemsep}{-0.5ex}\setlength{\parskip}{1.5ex}\setlength{\parsep}{0pt}}
\let\olditem\itemize\renewcommand{\itemize}{\olditem\setuplistspacing}
\let\oldenum\enumerate\renewcommand{\enumerate}{\oldenum\setuplistspacing}
\let\olddesc\description\renewcommand{\description}{\olddesc\setuplistspacing}

Then we can just hook this in with our clever preamble.

Emacs Lisp
#
(defvar org-latex-condense-lists t
  "Reduce the space between list items.")
(defvar org-latex-condensed-lists
  <<grab("latex-condense-lists")>>
  "LaTeX preamble snippet that reduces the space between list items.")

(add-to-list 'org-export-conditional-features (cons (lambda (_info) (and org-latex-condense-lists "^[ \t]*[-+]\\|^[ \t]*[1Aa][.)] ")) 'condensed-lists) t)
(add-to-list 'org-latex-feature-implementations '(condensed-lists :snippet org-latex-condensed-lists :order 0.7) t)
5.3.7.9. Pretty code blocks

We could just use minted for syntax highlighting — however, we can do better! The engrave-faces package lets us use Emacs’ font-lock for syntax highlighting, exporting that as LaTeX commands.

Emacs Lisp
#
(package! engrave-faces :recipe (:local-repo "lisp/engrave-faces"))
Emacs Lisp
#
(use-package! engrave-faces-latex
  :after ox-latex)

Using this as in LaTeX exports is now as easy as

Emacs Lisp
#
(setq org-latex-listings 'engraved)

One little annoyance with this is the interaction between microtype and Verbatim environments. Protrusion is not desirable here. Thankfully, we can patch the Verbatim environment to turn off protrusion locally.

Emacs Lisp
#
(add-to-list
 'org-latex-feature-implementations
 '(.no-protrusion-in-code
   :snippet "\\ifcsname Code\\endcsname\n  \\let\\oldcode\\Code\\renewcommand{\\Code}{\\microtypesetup{protrusion=false}\\oldcode}\n\\fi"
   :when microtype
   :eager t
   :order 98.5) t)

At some point it would be nice to make the box colours easily customisable. At the moment it’s fairly easy to change the syntax highlighting colours with (setq engrave-faces-preset-styles (engrave-faces-generate-preset)), but perhaps a toggle which specifies whether to use the default values, the current theme, or any named theme could be a good idea. It should also possible to set the box background dynamically to match. The named theme could work by looking for a style definition with a certain name in a cache dir, and then switching to that theme and producing (and saving) the style definition if it doesn’t exist.

Now let’s have the example block be styled similarly.

Emacs Lisp
#
(defadvice! org-latex-example-block-engraved (orig-fn example-block contents info)
  "Like `org-latex-example-block', but supporting an engraved backend"
  :around #'org-latex-example-block
  (let ((output-block (funcall orig-fn example-block contents info)))
    (if (eq 'engraved (plist-get info :latex-listings))
        (format "\\begin{Code}[alt]\n%s\n\\end{Code}" output-block)
      output-block)))

In addition to the vastly superior visual output, this should also be much faster to compile for code-heavy documents (like this config).

Performing a little benchmark with this document, I find that this is indeed the case.

LaTeX syntax highlighting backend Compile time Overhead Overhead ratio
verbatim 12 s 0 0.0
lstlistings 15 s 3 s 0.2
Engrave 34 s 22 s 1.8
Pygments (Minted) 184 s 172 s 14.3

Treating the verbatim (no syntax highlighting) result as a baseline; this rudimentary test suggest that engrave-faces is around eight times faster than pygments, and takes three times as long as no syntax highlighting (verbatim).

5.3.7.10. Julia code blocks

Julia code has fantastic support for unicode! The downside is that pdflatex is still a pain to use with unicode symbols. The solution — lualatex. Now we just need to make it automatic

Emacs Lisp
#
(defadvice! org-latex-pick-compiler (_contents info)
  :before #'org-latex-template
  :before #'org-beamer-template
  (when (and (memq 'code (plist-get info :features))
             (memq 'julia-code (plist-get info :features))
             (save-excursion
               (goto-char (point-min))
               (re-search-forward "[^\x00-\x7F\u200b]" nil t)))
    (setf info (plist-put
                (if (member #'+org-latex-replace-non-ascii-chars (plist-get info :filter-final-output))
                    (plist-put info :filter-final-output
                               (delq #'+org-latex-replace-non-ascii-chars (plist-get info :filter-final-output)))
                  info)
                :latex-compiler "lualatex"))))

Then a font with unicode support must be used. JuliaMono is the obvious choice, and we can use it with the fontspec package. In future it may be nice to set this just as a fallback font (when it isn’t a pain to do so).

julia-mono-fontspecLaTeX
#
\ifcsname directlua\endcsname
  \usepackage{fontspec}
  \newfontfamily\JuliaMono{JuliaMono-Regular.ttf}[Path=/usr/share/fonts/truetype/, Extension=.ttf]
  \newfontface\JuliaMonoRegular{JuliaMono-Regular}
  \setmonofont{JuliaMonoRegular}[Contextuals=Alternate, Scale=MatchLowercase]
\fi

Now all that remains is to hook this into the preamble generation.

Emacs Lisp
#
(defvar org-latex-julia-mono-fontspec
  <<grab("julia-mono-fontspec")>>
  "LaTeX preamble snippet that sets LuaLaTeX's fontspec to use Julia Mono.")

(add-to-list 'org-latex-feature-implementations '(julia-code :when code :snippet org-latex-julia-mono-fontspec :order 0) t)
(add-to-list 'org-export-conditional-features '("^[ \t]*#\\+begin_src julia\\|^[ \t]*#\\+BEGIN_SRC julia\\|src_julia" . julia-code) t)

(add-to-list 'org-latex-feature-implementations '(.microtype-lualatex :eager t :when (microtype julia-code) :prevents microtype :order 0.1 :snippet "\\usepackage[activate={true,nocompatibility},final,tracking=true,factor=2000]{microtype}\n"))
(add-to-list 'org-latex-feature-implementations (list '.custom-font-no-mono :eager t :prevents 'custom-font :order 0 :snippet (lambda (_info) (org-latex-fontset :serif :sans))) t)
5.3.7.11. Emojis

It would be nice to actually include emojis where used. Thanks to emojify, we have a folder of emoji images just sitting and waiting to be used 🙂.

First up, we want to detect when emojis are actually present. Manually constructing a regex for this would be a huge pain with the way the codepoints are scattered around, but thanks to char-script-table we don’t have to!

Emacs Lisp
#
(defvar org-latex-emoji--rx
  (let (emojis)
    (map-char-table
     (lambda (char set)
       (when (eq set 'emoji)
         (push (copy-tree char) emojis)))
     char-script-table)
    (rx-to-string `(any ,@emojis)))
  "A regexp to find all emoji-script characters.")

Once we’ve found an Emoji, we would like to include it in LaTeX. We’ll set up the infrastructure for this with the help of two packages

  • accsupp, to provide the copy-paste text overlay
  • transparent, to provide invisible text to enable text copying at the image

With these packages we can insert an emoji image at the point and then place some invisible text on-top of it that copies as the emoji codepoint.

Unfortunately though, accsupp doesn’t seem to accept five digit hexadecimal codepoints at this point in time, instead we need to convert to UTF-16 surrogate pairs, so we’ll give our \DeclareEmoji command two arguments: one for the non-surrogate form required by \DeclareUnicodeCharacter, and another for the surrogate form required by \BeginAccSupp.

latex-emoji-preambleLaTeX
#
\usepackage{accsupp}
\usepackage{transparent}
\newsavebox\emojibox

\NewDocumentCommand\DeclareEmoji{m m}{% UTF-8 codepoint, UTF-16 codepoint
  \DeclareUnicodeCharacter{#1}{%
    \sbox\emojibox{\raisebox{OFFSET}{%
        \includegraphics[height=HEIGHT]{EMOJI-FOLDER/#1}}}%
    \usebox\emojibox
    \llap{%
      \resizebox{\wd\emojibox}{\height}{%
        \BeginAccSupp{method=hex,unicode,ActualText=#2}%
        \texttransparent{0}{X}%
        \EndAccSupp{}}}}}

Once we know that there are emojis present we can add a bit of preamble to the buffer to make insertion easier.

Emacs Lisp
#
(defconst org-latex-emoji-base-dir
  (expand-file-name "emojis/" doom-cache-dir)
  "Directory where emojis should be saved and look for.")

(defvar org-latex-emoji-sets
  '(("twemoji" :url "https://github.com/twitter/twemoji/archive/refs/tags/v14.0.2.zip"
     :folder "twemoji-14.0.2/assets/svg" :height "1.8ex" :offset "-0.3ex")
    ("twemoji-bw" :url "https://github.com/youdly/twemoji-color-font/archive/refs/heads/v11-release.zip"
     :folder "twemoji-color-font-11-release/assets/builds/svg-bw" :height "1.8ex" :offset "-0.3ex")
    ("openmoji" :url "https://github.com/hfg-gmuend/openmoji/releases/latest/download/openmoji-svg-color.zip"
     :height "2.2ex" :offset "-0.45ex")
    ("openmoji-bw" :url "https://github.com/hfg-gmuend/openmoji/releases/latest/download/openmoji-svg-black.zip"
     :height "2.2ex" :offset "-0.45ex")
    ("emojione" :url "https://github.com/joypixels/emojione/archive/refs/tags/v2.2.7.zip"
     :folder "emojione-2.2.7/assets/svg") ; Warning, poor coverage
    ("noto" :url "https://github.com/googlefonts/noto-emoji/archive/refs/tags/v2.038.zip"
     :folder "noto-emoji-2.038/svg" :file-regexp "^emoji_u\\([0-9a-f_]+\\)"
     :height "2.0ex" :offset "-0.3ex"))
  "An alist of plistst of emoji sets.
Specified with the minimal form:
  (\"SET-NAME\" :url \"URL\")
The following optional parameters are supported:
  :folder (defaults to \"\")
  The folder within the archive where the emojis exist.
  :file-regexp (defaults to nil)
  Pattern with the emoji code point as the first capture group.
  :height (defaults to \"1.8ex\")
  Height of the emojis to be used.
  :offset (defaults to \"-0.3ex\")
  Baseline offset of the emojis.")

(defconst org-latex-emoji-keyword
  "LATEX_EMOJI_SET"
  "Keyword used to set the emoji set from `org-latex-emoji-sets'.")

(defvar org-latex-emoji-preamble <<grab("latex-emoji-preamble")>>
  "LaTeX preamble snippet that will allow for emojis to be declared.
Contains the string \"EMOJI-FOLDER\" which should be replaced with
the path to the emoji folder.")

(defun org-latex-emoji-utf16 (char)
  "Return the pair of UTF-16 surrogates that represent CHAR."
  (list
   (+ #xD7C0 (ash char -10))
   (+ #xDC00 (logand char #x03FF))))

(defun org-latex-emoji-declaration (char)
  "Construct the LaTeX command declaring CHAR as an emoji."
  (format "\\DeclareEmoji{%X}{%s} %% %s"
          char
          (if (< char #xFFFF)
              (format "%X" char)
            (apply #'format "%X%X" (org-latex-emoji-utf16 char)))
          (capitalize (get-char-code-property char 'name))))

(defun org-latex-emoji-fill-preamble (emoji-folder &optional height offset svg-p)
  "Fill in `org-latex-emoji-preamble' with EMOJI-FOLDER, HEIGHT, and OFFSET.
If SVG-P is set \"includegraphics\" will be replaced with \"includesvg\"."
  (let* (case-fold-search
         (filled-preamble
          (replace-regexp-in-string
           "HEIGHT"
           (or height "1.8ex")
           (replace-regexp-in-string
            "OFFSET"
            (or offset "-0.3ex")
            (replace-regexp-in-string
             "EMOJI-FOLDER"
             (directory-file-name
              (if (getenv "HOME")
                  (replace-regexp-in-string
                   (regexp-quote (getenv "HOME"))
                   "\\string~"
                   emoji-folder t t)
                emoji-folder))
             org-latex-emoji-preamble t t)
            t t)
           t t)))
    (if svg-p
        (replace-regexp-in-string
         "includegraphics" "includesvg"
         filled-preamble t t)
      filled-preamble)))

(defun org-latex-emoji-setup (&optional info)
  "Construct a preamble snippet to set up emojis based on INFO."
  (let* ((emoji-set
          (or (org-element-map
                  (plist-get info :parse-tree)
                  'keyword
                (lambda (keyword)
                  (and (string= (org-element-property :key keyword)
                                org-latex-emoji-keyword)
                       (org-element-property :value keyword)))
                info t)
              (caar org-latex-emoji-sets)))
         (emoji-spec (cdr (assoc emoji-set org-latex-emoji-sets)))
         (emoji-folder
          (expand-file-name emoji-set org-latex-emoji-base-dir))
         (emoji-svg-only
          (and (file-exists-p emoji-folder)
               (not (cl-some
                     (lambda (path)
                       (not (string= (file-name-extension path) "svg")))
                     (directory-files emoji-folder nil "\\....$"))))))
    (cond
     ((not emoji-spec)
      (error "Emoji set `%s' is unknown. Try one of: %s" emoji-set
             (string-join (mapcar #'car org-latex-emoji-sets) ", ")))
     ((not (file-exists-p emoji-folder))
      (if (and (not noninteractive)
               (yes-or-no-p (format "Emoji set `%s' is not installed, would you like to install it?" emoji-set)))
          (org-latex-emoji-install
           emoji-set
           (or (executable-find "cairosvg") (executable-find "inkscape")))
        (error "Emoji set `%s' is not installed" emoji-set))))
    (concat
     (org-latex-emoji-fill-preamble
      emoji-folder (plist-get emoji-spec :height)
      (plist-get emoji-spec :offset) emoji-svg-only)
     "\n\n"
     (mapconcat
      #'org-latex-emoji-declaration
      (let (unicode-cars)
        (save-excursion
          (goto-char (point-min))
          (while (re-search-forward org-latex-emoji--rx nil t)
            (push (aref (match-string 0) 0) unicode-cars)))
        (cl-delete-duplicates unicode-cars))
      "\n")
     "\n")))

(add-to-list 'org-export-conditional-features
             (cons (lambda (_info)
                     (save-excursion
                       (goto-char (point-min))
                       (re-search-forward org-latex-emoji--rx nil t)))
                   'emoji)
             t)

(add-to-list 'org-latex-feature-implementations
             (list 'emoji :requires 'image :snippet #'org-latex-emoji-setup :order 3))

Unfortunately this isn’t a global solution, as LuaLaTeX doesn’t have \DeclareUnicodeCharacter. However, we can fix this with a hack for the one case when we know it will be used.

Emacs Lisp
#
(add-to-list 'org-latex-feature-implementations
             '(.emoji-lualatex-hack
               :when (emoji julia-code) ; LuaLaTeX is used with julia-code.
               :eager t
               :snippet
               "\
\\usepackage{newunicodechar}
\\newcommand{\\DeclareUnicodeCharacter}[2]{%
    \\begingroup\\lccode`|=\\string\"#1\\relax
    \\lowercase{\\endgroup\\newunicodechar{|}}{#2}}"
               :order 2.9))

This works fairly nicely, there’s just one little QOL upgrade that we can perform. emojify downloads the 72x72 versions of Twemoji, however SVG versions are also produced. We could use inkscape to convert those to PDFs, which would likely be best for including.

This works fairly nicely, but it would be good to use .pdf forms whenever possible. We can use texdef to check the file extension priority list.

Shell Script
#
texdef -t pdflatex -p graphicx Gin@extensions
#
\Gin@extensions:
macro:->.pdf,.png,.jpg,.mps,.jpeg,.jbig2,.jb2,.PDF,.PNG,.JPG,.JPEG,.JBIG2,.JB2,.eps

Fantastic! We can see that .pdf actually comes first in the priority list. Now we just need to fetch and convert the emoji images.

Emacs Lisp
#
(defun org-latex-emoji-install (set &optional convert)
  "Dowload, convert, and install emojis for use with LaTeX."
  (interactive
   (list (completing-read "Emoji set to install: "
                          (mapcar
                           (lambda (set-spec)
                             (if (file-exists-p (expand-file-name (car set-spec) org-latex-emoji-base-dir))
                                 (propertize (car set-spec) 'face 'font-lock-doc-face)
                               (car set-spec)))
                           org-latex-emoji-sets)
                          nil t)
         (if (or (executable-find "cairosvg") (executable-find "inkscape"))
             (yes-or-no-p "Would you like to create .pdf forms of the Emojis (strongly recommended)?")
           (message "Install `cairosvg' (recommended) or `inkscape' to convert to PDF forms")
           nil)))
  (let ((emoji-folder (expand-file-name set org-latex-emoji-base-dir)))
    (when (or (not (file-exists-p emoji-folder))
              (and (not noninteractive)
                   (yes-or-no-p "Emoji folder already present, would you like to re-download?")
                   (progn (delete-directory emoji-folder) t)))
      (let* ((spec (cdr (assoc set org-latex-emoji-sets)))
             (dir (org-latex-emoji-install--download set (plist-get spec :url)))
             (svg-dir (expand-file-name (or (plist-get spec :folder) "") dir)))
        (org-latex-emoji-install--install
         set svg-dir (plist-get spec :file-regexp))))
    (when convert
      (org-latex-emoji-install--convert (file-name-as-directory emoji-folder))))
  (message "Emojis set `%s' installed." set))

(defun org-latex-emoji-install--download (name url)
  "Download the emoji archive URL for the set NAME."
  (let* ((dest-folder (make-temp-file (format "%s-" name) t)))
    (message "Downloading %s..." name)
    (let ((default-directory dest-folder))
      (call-process "curl" nil nil nil "-sL" url "--output" "emojis.zip")
      (message "Unzipping")
      (call-process "unzip" nil nil nil "emojis.zip")
      dest-folder)))

(defun org-latex-emoji-install--install (name dir &optional filename-regexp)
  "Install the emoji files in DIR to the NAME set folder.
If a FILENAME-REGEXP, only files matching this regexp will be moved,
and they will be renamed to the first capture group of the regexp."
  (message "Installing %s emojis into emoji directory" name)
  (let ((images (append (directory-files dir t ".*.svg")
                        (directory-files dir t ".*.pdf")))
        (emoji-dir (file-name-as-directory
                    (expand-file-name name org-latex-emoji-base-dir))))
    (unless (file-exists-p emoji-dir)
      (make-directory emoji-dir t))
    (mapc
     (lambda (image)
       (if filename-regexp
           (when (string-match filename-regexp (file-name-nondirectory image))
             (rename-file image
                          (expand-file-name
                           (file-name-with-extension
                            (upcase (match-string 1 (file-name-nondirectory image)))
                            (file-name-extension image))
                           emoji-dir)
                          t))
         (rename-file image
                      (expand-file-name
                       (file-name-with-extension
                        (upcase (file-name-nondirectory image))
                        (file-name-extension image))
                       emoji-dir)
                      t)))
     images)
    (message "%d emojis installed" (length images))))

(defun org-latex-emoji-install--convert (dir)
  "Convert all .svg files in DIR to .pdf forms.
Uses cairosvg if possible, falling back to inkscape."
  (let ((default-directory dir))
    (if (executable-find "cairosvg") ; cairo's PDFs are ~10% smaller
        (let* ((images (directory-files dir nil ".*.svg"))
               (num-images (length images))
               (index 0)
               (max-threads (1- (string-to-number (shell-command-to-string "nproc"))))
               (threads 0))
          (while (< index num-images)
            (setf threads (1+ threads))
            (let (message-log-max)
              (message "Converting emoji %d/%d (%s)" (1+ index) num-images (nth index images)))
            (make-process :name "cairosvg"
                          :command (list "cairosvg" (nth index images) "-o" (concat (file-name-sans-extension (nth index images)) ".pdf"))
                          :sentinel (lambda (proc msg)
                                      (when (memq (process-status proc) '(exit signal))
                                        (setf threads (1- threads)))))
            (setq index (1+ index))
            (while (> threads max-threads)
              (sleep-for 0.01)))
          (while (> threads 0)
            (sleep-for 0.01)))
      (message "Cairosvg not found. Proceeding with inkscape as a fallback.")
      (shell-command "inkscape --batch-process --export-type='pdf' *.svg"))
    (message "Finished conversion!")))
5.3.7.12. Remove non-ascii chars

When using pdflatex, almost non-ascii characters are generally problematic, and don’t appear in the pdf. It’s preferable to see that there was some character which wasn’t displayed as opposed to nothing.

We check every non-ascii character to make sure it’s not a character encoded by the inputenc packages when loaded with the utf8 option. We’ll also allow box-drawing characters since they can be mostly supported with pmboxdraw. Finally, we see if we have our own LaTeX conversion we can apply and if there is none we replace the non-ascii char with ¿.

No to make sure we only remove characters that can’t be displayed, we check /usr/share/texmf/tex/latex/base/utf8enc.dfu.

We just need to make sure this is appended to the list of filter functions, since we want to let emoji processing occur first.

Emacs Lisp
#
(defvar +org-pdflatex-inputenc-encoded-chars
  "[[:ascii:]\u00A0-\u01F0\u0218-\u021BȲȳȷˆˇ˜˘˙˛˝\u0400-\u04FFḂḃẞ\u200B\u200C\u2010-\u201E†‡•…‰‱‹›※‽⁄⁎⁒₡₤₦₩₫€₱℃№℗℞℠™Ω℧℮←↑→↓〈〉␢␣◦◯♪⟨⟩Ḡḡ\uFB00-\uFB06\u2500-\u259F]")

(defun +org-latex-replace-non-ascii-chars (text backend info)
  "Replace non-ascii chars with \\char\"XYZ forms."
  (when (and (org-export-derived-backend-p backend 'latex)
             (string= (plist-get info :latex-compiler) "pdflatex"))
    (let (case-replace)
      (replace-regexp-in-string "[^[:ascii:]]"
                                (lambda (nonascii)
                                  (if (or (string-match-p +org-pdflatex-inputenc-encoded-chars nonascii)
                                          (string-match-p org-latex-emoji--rx nonascii))
                                      nonascii
                                    (or (cdr (assoc nonascii +org-latex-non-ascii-char-substitutions))
                                        "¿")))
                                text))))

(add-to-list 'org-export-filter-plain-text-functions #'+org-latex-replace-non-ascii-chars t)

Now, there are some symbols that aren’t included in inputenc, but we should be able to handle anyway. For them we define a table of LaTeX translations

Character LaTeX
ɑ \(\alpha\)
β \(\beta\)
γ \(\gamma\)
δ \(\delta\)
ε \(\epsilon\)
ϵ \(\varepsilon\)
ζ \(\zeta\)
η \(\eta\)
θ \(\theta\)
ϑ \(\vartheta\)
ι \(\iota\)
κ \(\kappa\)
λ \(\lambda\)
μ \(\mu\)
ν \(\nu\)
ξ \(\xi\)
π \(\pi\)
ϖ \(\varpi\)
ρ \(\rho\)
ϱ \(\varrho\)
σ \(\sigma\)
ς \(\varsigma\)
τ \(\tau\)
υ \(\upsilon\)
ϕ \(\phi\)
φ \(\varphi\)
ψ \(\psi\)
ω \(\omega\)
Γ \(\Gamma\)
Δ \(\Delta\)
Θ \(\Theta\)
Λ \(\Lambda\)
Ξ \(\Xi\)
Π \(\Pi\)
Σ \(\Sigma\)
Υ \(\Upsilon\)
Φ \(\Phi\)
Ψ \(\Psi\)
Ω \(\Omega\)
א \(\aleph\)
ב \(\beth\)
ד \(\daleth\)
ג \(\gimel\)
gen-latex-non-ascii-char-substitutionsEmacs Lisp
#
(replace-regexp-in-string
 " '((" "\n   '(("
 (replace-regexp-in-string
  ") (" ")\n     ("
  (prin1-to-string
   `(defvar +org-latex-non-ascii-char-substitutions
      ',(mapcar
         (lambda (entry)
           (cons (car entry) (replace-regexp-in-string "\\\\" "\\\\\\\\" (cadr entry))))
         latex-non-ascii-char-substitutions)))))
Emacs Lisp
#
<<gen-latex-non-ascii-char-substitutions()>>
5.3.7.13. Normal spaces after abbreviations

In LaTeX inter-word and sentence spaces are typically of different widths. This can be an issue when using abbreviations i.e. e.g. etc. et al.. This can be corrected by forcing a normal space with . When exporting Org documents, we can add a filter to check for common abbreviations and make the space normal.

Emacs Lisp
#
(defvar +org-latex-abbreviations
  '(;; Latin
    "cf." "e.g." "etc." "et al." "i.e." "v." "vs." "viz." "n.b."
    ;; Corperate
    "inc." "govt." "ltd." "pty." "dept."
    ;; Temporal
    "est." "c."
    ;; Honorifics
    "Prof." "Dr." "Mr." "Mrs." "Ms." "Miss." "Sr." "Jr."
    ;; Components of a work
    "ed." "vol." "sec." "chap." "pt." "pp." "op." "no."
    ;; Common usage
    "approx." "misc." "min." "max.")
  "A list of abbreviations that should be spaced correctly when exporting to LaTeX.")

(defun +org-latex-correct-latin-abbreviation-spaces (text backend _info)
  "Normalise spaces after Latin abbreviations."
  (when (org-export-derived-backend-p backend 'latex)
    (replace-regexp-in-string (rx (group (or line-start space)
                                         (regexp (regexp-opt-group +org-latex-abbreviations)))
                                  (or line-end space))
                              "\\1\\\\ "
                              text)))

(add-to-list 'org-export-filter-paragraph-functions #'+org-latex-correct-latin-abbreviation-spaces t)
5.3.7.14. Extra special strings

LaTeX already recognises --- and -- as em/en-dashes, \- as a shy hyphen, and the conversion of ... to \ldots{} is hardcoded into org-latex-plain-text (unlike org-html-plain-text).

I’d quite like to also recognise -> and <-, so let’s set come up with some advice.

Emacs Lisp
#
(defvar org-latex-extra-special-string-regexps
  '(("<->" . "\\\\(\\\\leftrightarrow{}\\\\)")
    ("->" . "\\\\textrightarrow{}")
    ("<-" . "\\\\textleftarrow{}")))

(defun org-latex-convert-extra-special-strings (string)
  "Convert special characters in STRING to LaTeX."
  (dolist (a org-latex-extra-special-string-regexps string)
    (let ((re (car a))
          (rpl (cdr a)))
      (setq string (replace-regexp-in-string re rpl string t)))))

(defadvice! org-latex-plain-text-extra-special-a (orig-fn text info)
  "Make `org-latex-plain-text' handle some extra special strings."
  :around #'org-latex-plain-text
  (let ((output (funcall orig-fn text info)))
    (when (plist-get info :with-special-strings)
      (setq output (org-latex-convert-extra-special-strings output)))
    output))
5.3.7.15. Chameleon — aka. match theme

Once I had the idea of having the look of the LaTeX document produced match the current Emacs theme, I was enraptured. The result is the pseudo-class chameleon, which I have implemented in the package ox-chameleon.

Emacs Lisp
#
(package! ox-chameleon :recipe (:local-repo "lisp/ox-chameleon"))
Emacs Lisp
#
(use-package! ox-chameleon
  :after ox)
5.3.7.16. Make verbatim different to code

Since have just gone to so much effort above let’s make the most of it by making verbatim use verb instead of protectedtexttt (default).

This gives the same advantages as mentioned in the HTML export section.

Emacs Lisp
#
(setq org-latex-text-markup-alist
      '((bold . "\\textbf{%s}")
        (code . protectedtexttt)
        (italic . "\\emph{%s}")
        (strike-through . "\\sout{%s}")
        (underline . "\\uline{%s}")
        (verbatim . verb)))
5.3.7.17. Check for required packages

For how I’ve setup Org’s LaTeX export, the following packages are needed:

Package Description
adjustbox Adjust general LaTeX material in like includegraphics
amsmath A near-essential maths package
booktabs Nice horizontal lines in tables
cancel Cancel terms in equations
capt-of Captions outside floats
caption Finer control over captions
cleveref Easy cross-referencing
embedall Embed files in the document
float Floating environments
fontenc Font encodings
fvextra Enhanced verbatim environments
graphicx An extended graphics package
hanging Used by oc-csl
hyperref Links
inputenc Input file encodings
longtable Multi-page tables
mathalpha Set extended math alphabet fonts
mathtools Typesetting tools for maths
microtype Microtypography
pdfx Create pdf/a- and pdf/x- compatible documents
pifont A collection of symbols
preview Needed for AUCTeX and ob-latex
scrbase KOMA classes and more
siunitx Proper unit support
soul Strikethrough and underline, flexibly
subcaption Form subfigures and subcaptions
svg Insert SVG images
tikz Generally handy, as a dependancy and for graphics
tcolorbox Nice boxes for code
textcomp Font encodings
xcolor Colours
xparse Extended command/env definition forms
xcoffins Manipulate coffins (boxes) for typesetting

Then for the various fontsets:

  • Alegreya
  • arev
  • biolinum
  • FiraMono
  • FiraSans
  • fourier
  • gillius
  • kpfonts
  • libertine
  • newpxmath
  • newpxtext
  • newtxmath
  • newtxtext
  • newtxsf
  • noto
  • plex-mono
  • plex-sans
  • plex-serif
  • sourcecodepro
  • sourcesanspro
  • sourceserifpro

We can write a function which will check for each of these packages with kpsewhich, and then if any of them are missing we’ll inject some advice into the generated config that gets a list of missing packages and warns us every time we export to a PDF.

org-missing-latex-packagesEmacs Lisp
#
(setq org-required-latex-packages
      (append org-latex-required-packages-list
              org-latex-font-packages-list))

(defun check-for-latex-packages (packages)
  (delq nil (mapcar (lambda (package)
                      (unless
                          (= 0 (call-process "kpsewhich" nil nil nil (concat package ".sty")))
                        package))
                    packages)))

(if-let ((missing-pkgs (check-for-latex-packages org-required-latex-packages)))
    (concat
     (pp-to-string `(setq org-required-latex-packages ',org-required-latex-packages))
     (message ";; Detected missing LaTeX packages: %s\n" (mapconcat #'identity missing-pkgs ", "))
     (pp-to-string
      '(defun check-for-latex-packages (packages)
         (delq nil (mapcar (lambda (package)
                             (unless
                                 (= 0 (call-process "kpsewhich" nil nil nil (concat package ".sty")))
                               package))
                           packages))))
     (pp-to-string
      '(defun +org-warn-about-missing-latex-packages (&rest _)
         (message "Checking for missing LaTeX packages...")
         (sleep-for 0.4)
         (if-let (missing-pkgs (check-for-latex-packages org-required-latex-packages))
             (message "%s You are missing the following LaTeX packages: %s."
                      (propertize "Warning!" 'face '(bold warning))
                      (mapconcat (lambda (pkg) (propertize pkg 'face 'font-lock-variable-name-face))
                                 missing-pkgs
                                 ", "))
           (message "%s You have all the required LaTeX packages. Run %s to make this message go away."
                    (propertize "Success!" 'face '(bold success))
                    (propertize "doom sync" 'face 'font-lock-keyword-face))
           (advice-remove 'org-latex-export-to-pdf #'+org-warn-about-missing-latex-packages))
         (sleep-for 1)))
     (pp-to-string
      '(advice-add 'org-latex-export-to-pdf :before #'+org-warn-about-missing-latex-packages)))
  ";; No missing LaTeX packags detected")
Emacs Lisp
#
<<org-missing-latex-packages()>>

5.3.8. Beamer Export

It’s nice to use a different theme

Emacs Lisp
#
(setq org-beamer-theme "[progressbar=foot]metropolis")

When using metropolis though, we want to make a few tweaks:

beamer-metropolis-tweaksLaTeX
#
\NewCommandCopy{\moldusetheme}{\usetheme}
\renewcommand*{\usetheme}[2][]{\moldusetheme[#1]{#2}
  \setbeamertemplate{items}{$\bullet$}
  \setbeamerfont{block title}{size=\normalsize, series=\bfseries\parbox{0pt}{\rule{0pt}{4ex}}}}

\makeatletter
\newcommand{\setmetropolislinewidth}{
  \setlength{\metropolis@progressinheadfoot@linewidth}{1.2px}}
\makeatother

\usepackage{etoolbox}
\AtEndPreamble{\setmetropolislinewidth}

Now let’s just apply this along with some extra beamer tweaks.

Emacs Lisp
#
(defun org-beamer-p (info)
  (eq 'beamer (and (plist-get info :back-end)
                   (org-export-backend-name (plist-get info :back-end)))))

(add-to-list 'org-export-conditional-features
             '(org-beamer-p . beamer) t)
(add-to-list 'org-latex-feature-implementations
             '(beamer :requires .missing-koma :prevents (italic-quotes condensed-lists)) t)
(add-to-list 'org-latex-feature-implementations
             '(.missing-koma :snippet "\\usepackage{scrextend}" :order 2) t)

(defvar org-beamer-metropolis-tweaks
  <<grab("beamer-metropolis-tweaks")>>
  "LaTeX preamble snippet that tweaks the Beamer metropolis theme styling.")

(add-to-list 'org-export-conditional-features
             (cons (lambda (info)
                     (and (org-beamer-p info)
                          (string-match-p "metropolis$" org-beamer-theme)))
                   'beamer-metropolis)
             t)
(add-to-list 'org-latex-feature-implementations
             '(beamer-metropolis :requires beamer :snippet org-beamer-metropolis-tweaks :order 3) t)

And I think that it’s natural to divide a presentation into sections, e.g. Introduction, Overview… so let’s set bump up the headline level that becomes a frame from 1 to 2.

Emacs Lisp
#
(setq org-beamer-frame-level 2)

5.3.9. Reveal export

By default reveal is rather nice, there are just a few tweaks that I consider a good idea.

Emacs Lisp
#
(setq org-re-reveal-theme "white"
      org-re-reveal-transition "slide"
      org-re-reveal-plugins '(markdown notes math search zoom))

5.3.10. ASCII export

To start with, why settle for ASCII when UTF-8 exists?

Emacs Lisp
#
(setq org-ascii-charset 'utf-8)

The ASCII export is generally fairly nice. I think the main aspect that could benefit from improvement is the appearance of LaTeX fragments. There’s a nice utility we can use to create unicode representation, which are much nicer. It’s called latex2text, and it’s part of the pylatexenc package, and it’s not really packaged. So, we’ll resort to installing it with pip.

Shell Script
#
sudo python3 -m pip install pylatexenc

With that installed, we can override the (org-ascii-latex-fragment) and (org-ascii-latex-environment) functions, which are conveniently very slim — just extracting the content, and indenting. We’ll only do something different when utf-8 is set.

Emacs Lisp
#
(when (executable-find "latex2text")
  (after! ox-ascii
    (defvar org-ascii-convert-latex t
      "Use latex2text to convert LaTeX elements to unicode.")

    (defadvice! org-ascii-latex-environment-unicode-a (latex-environment _contents info)
      "Transcode a LATEX-ENVIRONMENT element from Org to ASCII, converting to unicode.
CONTENTS is nil.  INFO is a plist holding contextual
information."
      :override #'org-ascii-latex-environment
      (when (plist-get info :with-latex)
        (org-ascii--justify-element
         (org-remove-indentation
          (let* ((latex (org-element-property :value latex-environment))
                 (unicode (and (eq (plist-get info :ascii-charset) 'utf-8)
                               org-ascii-convert-latex
                               (doom-call-process "latex2text" "-q" "--code" latex))))
            (if (= (car unicode) 0) ; utf-8 set, and sucessfully ran latex2text
                (cdr unicode) latex)))
         latex-environment info)))

    (defadvice! org-ascii-latex-fragment-unicode-a (latex-fragment _contents info)
      "Transcode a LATEX-FRAGMENT object from Org to ASCII, converting to unicode.
CONTENTS is nil.  INFO is a plist holding contextual
information."
      :override #'org-ascii-latex-fragment
      (when (plist-get info :with-latex)
        (let* ((latex (org-element-property :value latex-fragment))
               (unicode (and (eq (plist-get info :ascii-charset) 'utf-8)
                             org-ascii-convert-latex
                             (doom-call-process "latex2text" "-q" "--code" latex))))
          (if (and unicode (= (car unicode) 0)) ; utf-8 set, and sucessfully ran latex2text
              (cdr unicode) latex))))))

5.3.11. Markdown Export

5.3.11.1. GFM

Because of the lovely variety in markdown implementations there isn’t actually such a thing a standard table spec … or standard anything really. Because org-md is a goody-two-shoes, it just uses HTML for all these non-standardised elements (a lot of them). So ox-gfm is handy for exporting markdown with all the features that GitHub has.

Emacs Lisp
#
(package! ox-gfm :pin "46faa67dbb3fb0cd7a76c3fe518f16e4195c22c7")
Emacs Lisp
#
(use-package! ox-gfm
  :after ox)
5.3.11.2. Character substitutions

When I want to paste exported markdown somewhere (for example when using Emacs Everywhere), it can be preferable to have unicode characters for --- etc. instead of &#x2014;.

To accomplish this, we just need to locally rebind the alist which provides these substitution.

Emacs Lisp
#
(defadvice! org-md-plain-text-unicode-a (orig-fn text info)
  "Locally rebind `org-html-special-string-regexps'"
  :around #'org-md-plain-text
  (let ((org-html-special-string-regexps
         '(("\\\\-" . "-")
           ("---\\([^-]\\|$\\)" . "—\\1")
           ("--\\([^-]\\|$\\)" . "–\\1")
           ("\\.\\.\\." . "…")
           ("<->" . "⟷")
           ("->" . "→")
           ("<-" . "←"))))
    (funcall orig-fn text (plist-put info :with-smart-quotes nil))))

In the future, I may want to check info to only have this active when ox-gfm is being used.

Another worthwhile consideration is LaTeX formatting. It seems most Markdown parsers are fixated on TeX-style syntax ($ and $$). As unfortunate as this is, it’s probably best to accommodate them, for the sake of decent rendering.

ox-md doesn’t provide any transcoders for this, so we’ll have to whip up our own and push them onto the md transcoders alist.

Emacs Lisp
#
(after! ox-md
  (defun org-md-latex-fragment (latex-fragment _contents info)
    "Transcode a LATEX-FRAGMENT object from Org to Markdown."
    (let ((frag (org-element-property :value latex-fragment)))
      (cond
       ((string-match-p "^\\\\(" frag)
        (concat "$" (substring frag 2 -2) "$"))
       ((string-match-p "^\\\\\\[" frag)
        (concat "$$" (substring frag 2 -2) "$$"))
       (t (message "unrecognised fragment: %s" frag)
          frag))))

  (defun org-md-latex-environment (latex-environment contents info)
    "Transcode a LATEX-ENVIRONMENT object from Org to Markdown."
    (concat "$$\n"
            (org-html-latex-environment latex-environment contents info)
            "$$\n"))

  (defun org-utf8-entity (entity _contents _info)
    "Transcode an ENTITY object from Org to utf-8.
CONTENTS are the definition itself.  INFO is a plist holding
contextual information."
    (org-element-property :utf-8 entity))

  ;; We can't let this be immediately parsed and evaluated,
  ;; because eager macro-expansion tries to call as-of-yet
  ;; undefined functions.
  ;; NOTE in the near future this shouldn't be required
  (eval
   '(dolist (extra-transcoder
             '((latex-fragment . org-md-latex-fragment)
               (latex-environment . org-md-latex-environment)
               (entity . org-utf8-entity)))
      (unless (member extra-transcoder (org-export-backend-transcoders
                                        (org-export-get-backend 'md)))
        (push extra-transcoder (org-export-backend-transcoders
                                (org-export-get-backend 'md)))))))

5.3.12. Babel

Doom lazy-loads babel languages, with is lovely. It also pulls in ob-async, which is nice, but it would be even better if it was used by default.

There are two caveats to ob-async:

  1. It does not support :session
    • So, we don’t want :async used when :session is set
  2. It adds a fixed delay to execution
    • This is undesirable in a number of cases, for example it’s generally unwanted with emacs-lisp code
    • As such, I also introduce a async language blacklist to control when it’s automatically enabled

Due to the nuance in the desired behaviour, instead of just adding :async to org-babel-default-header-args, I advice org-babel-get-src-block-info to add :async intelligently. As an escape hatch, it also recognises :sync as an indication that :async should not be added.

I did originally have this enabled for everything except for emacs-lisp and LaTeX (there were weird issues), but this added a ~3s “startup” cost to every src block evaluation, which was a bit of a pain. Since :async can be added easily with #+properties, I’ve turned this behaviour from a blacklist to a whitelist.

Emacs Lisp
#
(add-transient-hook! #'org-babel-execute-src-block
  (require 'ob-async))

(defvar org-babel-auto-async-languages '()
  "Babel languages which should be executed asyncronously by default.")

(defadvice! org-babel-get-src-block-info-eager-async-a (orig-fn &optional light datum)
  "Eagarly add an :async parameter to the src information, unless it seems problematic.
This only acts o languages in `org-babel-auto-async-languages'.
Not added when either:
+ session is not \"none\"
+ :sync is set"
  :around #'org-babel-get-src-block-info
  (let ((result (funcall orig-fn light datum)))
    (when (and (string= "none" (cdr (assoc :session (caddr result))))
               (member (car result) org-babel-auto-async-languages)
               (not (assoc :async (caddr result))) ; don't duplicate
               (not (assoc :sync (caddr result))))
      (push '(:async) (caddr result)))
    result))

5.3.13. ESS

We don’t want R evaluation to hang the editor, hence

Emacs Lisp
#
(setq ess-eval-visibly 'nowait)

Syntax highlighting is nice, so let’s turn all of that on

Emacs Lisp
#
(setq ess-R-font-lock-keywords
      '((ess-R-fl-keyword:keywords . t)
        (ess-R-fl-keyword:constants . t)
        (ess-R-fl-keyword:modifiers . t)
        (ess-R-fl-keyword:fun-defs . t)
        (ess-R-fl-keyword:assign-ops . t)
        (ess-R-fl-keyword:%op% . t)
        (ess-fl-keyword:fun-calls . t)
        (ess-fl-keyword:numbers . t)
        (ess-fl-keyword:operators . t)
        (ess-fl-keyword:delimiters . t)
        (ess-fl-keyword:= . t)
        (ess-R-fl-keyword:F&T . t)))

Lastly, in the event that I use JAGS, it would be nice to be able to use jags as the language identifier, not ess-jags.

Emacs Lisp
#
(after! org
  (add-to-list '+org-babel-mode-alist '(jags . ess-jags)))

5.4. LaTeX

File Extensions

5.4.1. To-be-implemented ideas

  • Paste image from clipboard

    • Determine first folder in graphicspath if applicable
    • Ask for file name
    • Use xclip to save file to graphics folder, or current directory (whichever applies)
    Shell Script
    #
    command -v xclip >/dev/null 2>&1 || { echo >&1 "no xclip"; exit 1; }
    
    if
        xclip -selection clipboard -target image/png -o >/dev/null 2>&1
    then
        xclip -selection clipboard -target image/png -o >$1 2>/dev/null
        echo $1
    else
        echo "no image"
    fi
    
    • Insert figure, with filled in details as a result (activate yasnippet with filename as variable maybe?)

5.4.2. Compilation

Emacs Lisp
#
(setq TeX-save-query nil
      TeX-show-compilation t
      TeX-command-extra-options "-shell-escape")
(after! latex
  (add-to-list 'TeX-command-list '("XeLaTeX" "%`xelatex%(mode)%' %t" TeX-run-TeX nil t)))

For viewing the PDF, I rather like the pdf-tools viewer. While auctex is trying to be nice in recognising that I have some PDF viewing apps installed, I’d rather not have it default to using them, so let’s re-order the preferences.

Emacs Lisp
#
(setq +latex-viewers '(pdf-tools evince zathura okular skim sumatrapdf))

5.4.3. Snippet helpers

5.4.3.1. Template

For use in the new-file template, let’s set out a nice preamble we may want to use. Then let’s bind the content to a function, and define some nice helpers.

Emacs Lisp
#
(setq tec/yas-latex-template-preamble "
<<latex-nice-preamble>>
")

(defun tec/yas-latex-get-class-choice ()
  "Prompt user for LaTeX class choice"
  (setq tec/yas-latex-class-choice (completing-read "Select document class: " '("article" "scrartcl" "bmc"))))

(defun tec/yas-latex-preamble-if ()
  "Based on class choice prompt for insertion of default preamble"
  (if (equal tec/yas-latex-class-choice "bmc") 'nil
    (eq (read-char-choice "Include default preamble? [Type y/n]" '(?y ?n)) ?y)))
5.4.3.2. Deliminators
Emacs Lisp
#
(after! tex
  (defvar tec/tex-last-delim-char nil
    "Last open delim expanded in a tex document")
  (defvar tec/tex-delim-dot-second t
    "When the `tec/tex-last-delim-char' is . a second character (this) is prompted for")
  (defun tec/get-open-delim-char ()
    "Exclusivly read next char to tec/tex-last-delim-char"
    (setq tec/tex-delim-dot-second nil)
    (setq tec/tex-last-delim-char (read-char-exclusive "Opening deliminator, recognises: 9 ( [ { < | ."))
    (when (eql ?. tec/tex-last-delim-char)
      (setq tec/tex-delim-dot-second (read-char-exclusive "Other deliminator, recognises: 0 9 (  ) [ ] { } < > |"))))
  (defun tec/tex-open-delim-from-char (&optional open-char)
    "Find the associated opening delim as string"
    (unless open-char (setq open-char (if (eql ?. tec/tex-last-delim-char)
                                          tec/tex-delim-dot-second
                                        tec/tex-last-delim-char)))
    (pcase open-char
      (?\( "(")
      (?9  "(")
      (?\[ "[")
      (?\{ "\\{")
      (?<  "<")
      (?|  (if tec/tex-delim-dot-second "." "|"))
      (_   ".")))
  (defun tec/tex-close-delim-from-char (&optional open-char)
    "Find the associated closing delim as string"
    (if tec/tex-delim-dot-second
        (pcase tec/tex-delim-dot-second
          (?\) ")")
          (?0  ")")
          (?\] "]")
          (?\} "\\}")
          (?\> ">")
          (?|  "|")
          (_   "."))
      (pcase (or open-char tec/tex-last-delim-char)
        (?\( ")")
        (?9  ")")
        (?\[ "]")
        (?\{ "\\}")
        (?<  ">")
        (?\) ")")
        (?0  ")")
        (?\] "]")
        (?\} "\\}")
        (?\> ">")
        (?|  "|")
        (_   "."))))
  (defun tec/tex-next-char-smart-close-delim (&optional open-char)
    (and (bound-and-true-p smartparens-mode)
         (eql (char-after) (pcase (or open-char tec/tex-last-delim-char)
                             (?\( ?\))
                             (?\[ ?\])
                             (?{ ?})
                             (?< ?>)))))
  (defun tec/tex-delim-yas-expand (&optional open-char)
    (yas-expand-snippet (yas-lookup-snippet "_deliminators" 'latex-mode) (point) (+ (point) (if (tec/tex-next-char-smart-close-delim open-char) 2 1)))))

5.4.4. Editor visuals

Let’s enhance TeX-fold-math a bit

Emacs Lisp
#
(after! latex
  (setcar (assoc "⋆" LaTeX-fold-math-spec-list) "★")) ;; make \star bigger

(setq TeX-fold-math-spec-list
      `(;; missing/better symbols
        ("≤" ("le"))
        ("≥" ("ge"))
        ("≠" ("ne"))
        ;; convenience shorts -- these don't work nicely ATM
        ;; ("‹" ("left"))
        ;; ("›" ("right"))
        ;; private macros
        ("ℝ" ("RR"))
        ("ℕ" ("NN"))
        ("ℤ" ("ZZ"))
        ("ℚ" ("QQ"))
        ("ℂ" ("CC"))
        ("ℙ" ("PP"))
        ("ℍ" ("HH"))
        ("𝔼" ("EE"))
        ("𝑑" ("dd"))
        ;; known commands
        ("" ("phantom"))
        (,(lambda (num den) (if (and (TeX-string-single-token-p num) (TeX-string-single-token-p den))
                                (concat num "/" den)
                              (concat "❪" num "/" den "❫"))) ("frac"))
        (,(lambda (arg) (concat "√" (TeX-fold-parenthesize-as-necessary arg))) ("sqrt"))
        (,(lambda (arg) (concat "⭡" (TeX-fold-parenthesize-as-necessary arg))) ("vec"))
        ("‘{1}’" ("text"))
        ;; private commands
        ("|{1}|" ("abs"))
        ("‖{1}‖" ("norm"))
        ("⌊{1}⌋" ("floor"))
        ("⌈{1}⌉" ("ceil"))
        ("⌊{1}⌉" ("round"))
        ("𝑑{1}/𝑑{2}" ("dv"))
        ("∂{1}/∂{2}" ("pdv"))
        ;; fancification
        ("{1}" ("mathrm"))
        (,(lambda (word) (string-offset-roman-chars 119743 word)) ("mathbf"))
        (,(lambda (word) (string-offset-roman-chars 119951 word)) ("mathcal"))
        (,(lambda (word) (string-offset-roman-chars 120003 word)) ("mathfrak"))
        (,(lambda (word) (string-offset-roman-chars 120055 word)) ("mathbb"))
        (,(lambda (word) (string-offset-roman-chars 120159 word)) ("mathsf"))
        (,(lambda (word) (string-offset-roman-chars 120367 word)) ("mathtt"))
        )
      TeX-fold-macro-spec-list
      '(
        ;; as the defaults
        ("[f]" ("footnote" "marginpar"))
        ("[c]" ("cite"))
        ("[l]" ("label"))
        ("[r]" ("ref" "pageref" "eqref"))
        ("[i]" ("index" "glossary"))
        ("..." ("dots"))
        ("{1}" ("emph" "textit" "textsl" "textmd" "textrm" "textsf" "texttt"
                "textbf" "textsc" "textup"))
        ;; tweaked defaults
        ("©" ("copyright"))
        ("®" ("textregistered"))
        ("™"  ("texttrademark"))
        ("[1]:||►" ("item"))
        ("❡❡ {1}" ("part" "part*"))
        ("❡ {1}" ("chapter" "chapter*"))
        ("§ {1}" ("section" "section*"))
        ("§§ {1}" ("subsection" "subsection*"))
        ("§§§ {1}" ("subsubsection" "subsubsection*"))
        ("¶ {1}" ("paragraph" "paragraph*"))
        ("¶¶ {1}" ("subparagraph" "subparagraph*"))
        ;; extra
        ("⬖ {1}" ("begin"))
        ("⬗ {1}" ("end"))
        ))

(defun string-offset-roman-chars (offset word)
  "Shift the codepoint of each character in WORD by OFFSET with an extra -6 shift if the letter is lowercase"
  (apply 'string
         (mapcar (lambda (c)
                   (string-offset-apply-roman-char-exceptions
                    (+ (if (>= c 97) (- c 6) c) offset)))
                 word)))

(defvar string-offset-roman-char-exceptions
  '(;; lowercase serif
    (119892 .  8462) ; 
    ;; lowercase caligraphic
    (119994 . 8495) ; 
    (119996 . 8458) ; 
    (120004 . 8500) ; 
    ;; caligraphic
    (119965 . 8492) ; 
    (119968 . 8496) ; 
    (119969 . 8497) ; 
    (119971 . 8459) ; 
    (119972 . 8464) ; 
    (119975 . 8466) ; 
    (119976 . 8499) ; 
    (119981 . 8475) ; 
    ;; fraktur
    (120070 . 8493) ; 
    (120075 . 8460) ; 
    (120076 . 8465) ; 
    (120085 . 8476) ; 
    (120092 . 8488) ; 
    ;; blackboard
    (120122 . 8450) ; 
    (120127 . 8461) ; 
    (120133 . 8469) ; 
    (120135 . 8473) ; 
    (120136 . 8474) ; 
    (120137 . 8477) ; 
    (120145 . 8484) ; 
    )
  "An alist of deceptive codepoints, and then where the glyph actually resides.")

(defun string-offset-apply-roman-char-exceptions (char)
  "Sometimes the codepoint doesn't contain the char you expect.
Such special cases should be remapped to another value, as given in `string-offset-roman-char-exceptions'."
  (if (assoc char string-offset-roman-char-exceptions)
      (cdr (assoc char string-offset-roman-char-exceptions))
    char))

(defun TeX-fold-parenthesize-as-necessary (tokens &optional suppress-left suppress-right)
  "Add ❪ ❫ parenthesis as if multiple LaTeX tokens appear to be present"
  (if (TeX-string-single-token-p tokens) tokens
    (concat (if suppress-left "" "❪")
            tokens
            (if suppress-right "" "❫"))))

(defun TeX-string-single-token-p (teststring)
  "Return t if TESTSTRING appears to be a single token, nil otherwise"
  (if (string-match-p "^\\\\?\\w+$" teststring) t nil))

Some local keybindings to make life a bit easier

Emacs Lisp
#
(after! tex
  (map!
   :map LaTeX-mode-map
   :ei [C-return] #'LaTeX-insert-item)
  (setq TeX-electric-math '("\\(" . "")))

Maths deliminators can be de-emphasised a bit

Emacs Lisp
#
;; Making \( \) less visible
(defface unimportant-latex-face
  '((t :inherit font-lock-comment-face :weight extra-light))
  "Face used to make \\(\\), \\[\\] less visible."
  :group 'LaTeX-math)

(font-lock-add-keywords
 'latex-mode
 `(("\\\\[]()[]" 0 'unimportant-latex-face prepend))
 'end)

;; (font-lock-add-keywords
;;  'latex-mode
;;  '(("\\\\[[:word:]]+" 0 'font-lock-keyword-face prepend))
;;  'end)

And enable shell escape for the preview

Emacs Lisp
#
(setq preview-LaTeX-command '("%`%l \"\\nonstopmode\\nofiles\
\\PassOptionsToPackage{" ("," . preview-required-option-list) "}{preview}\
\\AtBeginDocument{\\ifx\\ifPreview\\undefined"
preview-default-preamble "\\fi}\"%' \"\\detokenize{\" %t \"}\""))

5.4.5. Math input

5.4.5.1. CDLaTeX

The symbols and modifies are very nice by default, but could do with a bit of fleshing out. Let’s change the prefix to a key which is similarly rarely used, but more convenient, like ;.

Emacs Lisp
#
(after! cdlatex
  (setq cdlatex-env-alist
        '(("bmatrix" "\\begin{bmatrix}\n?\n\\end{bmatrix}" nil)
          ("equation*" "\\begin{equation*}\n?\n\\end{equation*}" nil)))
  (setq ;; cdlatex-math-symbol-prefix ?\; ;; doesn't work at the moment :(
   cdlatex-math-symbol-alist
   '( ;; adding missing functions to 3rd level symbols
     (?_    ("\\downarrow"  ""           "\\inf"))
     (?2    ("^2"           "\\sqrt{?}"     ""     ))
     (?3    ("^3"           "\\sqrt[3]{?}"  ""     ))
     (?^    ("\\uparrow"    ""           "\\sup"))
     (?k    ("\\kappa"      ""           "\\ker"))
     (?m    ("\\mu"         ""           "\\lim"))
     (?c    (""             "\\circ"     "\\cos"))
     (?d    ("\\delta"      "\\partial"  "\\dim"))
     (?D    ("\\Delta"      "\\nabla"    "\\deg"))
     ;; no idea why \Phi isnt on 'F' in first place, \phi is on 'f'.
     (?F    ("\\Phi"))
     ;; now just convenience
     (?.    ("\\cdot" "\\dots"))
     (?:    ("\\vdots" "\\ddots"))
     (?*    ("\\times" "\\star" "\\ast")))
   cdlatex-math-modify-alist
   '( ;; my own stuff
     (?B    "\\mathbb"        nil          t    nil  nil)
     (?a    "\\abs"           nil          t    nil  nil))))
5.4.5.2. LAAS

This makes use of aas (Auto Activating Snippets) for CDLaTeX-like symbol input.

Emacs Lisp
#
(package! laas :recipe (:local-repo "lisp/LaTeX-auto-activating-snippets"))
Emacs Lisp
#
(use-package! laas
  :hook (LaTeX-mode . laas-mode)
  :config
  (defun laas-tex-fold-maybe ()
    (unless (equal "/" aas-transient-snippet-key)
      (+latex-fold-last-macro-a)))
  (add-hook 'aas-post-snippet-expand-hook #'laas-tex-fold-maybe))

5.4.6. SyncTeX

Emacs Lisp
#
(after! tex
  (add-to-list 'TeX-view-program-list '("Evince" "evince %o"))
  (add-to-list 'TeX-view-program-selection '(output-pdf "Evince")))

5.4.7. Fixes

In case of Emacs28,

Emacs Lisp
#
(when EMACS28+
  (add-hook 'latex-mode-hook #'TeX-latex-mode))

5.4.8. Citing

Emacs Lisp
#
(use-package citar
  :bind (("C-c b" . citar-insert-citation)
         :map minibuffer-local-map
         ("M-b" . citar-insert-preset))
  :custom
  (citar-bibliography '("~/Zotero/literature.bib")))

5.5. Python

Since I’m using mypyls, as suggested in :lang python LSP support I’ll tweak the priority of mypyls

Emacs Lisp
#
(after! lsp-python-ms
  (set-lsp-priority! 'mspyls 1))

5.6. PDF

5.6.1. MuPDF

pdf-tools is nice, but a mupdf-based solution is nicer.

Emacs Lisp
#
(package! paper :recipe (:host github :repo "ymarco/paper-mode"
                         :files ("*.el" ".so")
                         :pre-build ("make")))
Emacs Lisp
#
;; (use-package paper
;;   ;; :mode ("\\.pdf\\'"  . paper-mode)
;;   ;; :mode ("\\.epub\\'"  . paper-mode)
;;   :config
;;   (require 'evil-collection-paper)
;;   (evil-collection-paper-setup))

5.6.2. Terminal viewing

Sometimes I’m in a terminal and I still want to see the content. Additionally, sometimes I’d like to act on the textual content and so would like a plaintext version. Thanks to we have a convenient way of performing this conversion. I’ve integrated this into a little package, pdftotext.el.

Emacs Lisp
#
(package! pdftotext :recipe (:local-repo "lisp/pdftotext"))

The output can be slightly nicer without spelling errors, and with prettier page feeds (^L by default).

This is very nice, now we just need to associate it with .pdf files, and make sure pdf-tools doesn’t take priority.

Lastly, whenever Emacs is non-graphical (i.e. a TUI), we want to use this by default.

Emacs Lisp
#
(use-package! pdftotext
  :init
  (unless (display-graphic-p)
    (add-to-list 'auto-mode-alist '("\\.[pP][dD][fF]\\'" . pdftotext-mode))
    (add-to-list 'magic-mode-alist '("%PDF" . pdftotext-mode)))
  :config
  (unless (display-graphic-p) (after! pdf-tools (pdftotext-install)))
  ;; For prettyness
  (add-hook 'pdftotext-mode-hook #'spell-fu-mode-disable)
  (add-hook 'pdftotext-mode-hook (lambda () (page-break-lines-mode 1)))
  ;; I have no idea why this is needed
  (map! :map pdftotext-mode-map
        "<mouse-4>" (cmd! (scroll-down mouse-wheel-scroll-amount-horizontal))
        "<mouse-5>" (cmd! (scroll-up mouse-wheel-scroll-amount-horizontal))))

5.7. R

5.7.1. Editor Visuals

Emacs Lisp
#
(after! ess-r-mode
  (appendq! +ligatures-extra-symbols
            '(:assign "⟵"
              :multiply "×"))
  (set-ligatures! 'ess-r-mode
    ;; Functional
    :def "function"
    ;; Types
    :null "NULL"
    :true "TRUE"
    :false "FALSE"
    :int "int"
    :float "float"
    :bool "bool"
    ;; Flow
    :not "!"
    :and "&&" :or "||"
    :for "for"
    :in "%in%"
    :return "return"
    ;; Other
    :assign "<-"
    :multiply "%*%"))

5.8. Matlab

5.8.1. Setup

Emacs Lisp
#
(package! matlab-mode)
Emacs Lisp
#
(autoload 'matlab-mode "matlab" "Matlab Editing Mode" t)
 (add-to-list
  'auto-mode-alist
  '("\\.m$" . matlab-mode))
 (setq matlab-indent-function t)
 (setq matlab-shell-command "matlab")

5.9. Julia

As mentioned in lsp-julia#35, lsp-mode seems to serve an invalid response to the Julia server. The pseudo-fix is rather simple at least

Emacs Lisp
#
(add-hook 'julia-mode-hook #'rainbow-delimiters-mode-enable)
(add-hook! 'julia-mode-hook
  (setq-local lsp-enable-folding t
              lsp-folding-range-limit 100))

Julia is also missing a mime type, but that’s not too hard to fix.

XML
#
<?xml version="1.0" encoding="utf-8"?>
<mime-info xmlns='http://www.freedesktop.org/standards/shared-mime-info'>
  <mime-type type="text/julia">
    <comment>Julia source sode</comment>
    <glob pattern="*.jl"/>
    <alias type="text/julia"/>
  </mime-type>
</mime-info>
Shell Script
#
update-mime-database ~/.local/share/mime

5.10. Graphviz

Graphviz is a nice method of visualising simple graphs, based on plaintext .dot / .gv files.

Emacs Lisp
#
(package! graphviz-dot-mode :pin "46afe4825b4a3a5d1a1ac65ec7f585051f756b78")
Emacs Lisp
#
(use-package! graphviz-dot-mode
  :commands graphviz-dot-mode
  :mode ("\\.dot\\'" . graphviz-dot-mode)
  :init
  (after! org
    (setcdr (assoc "dot" org-src-lang-modes)
            'graphviz-dot)))

(use-package! company-graphviz-dot
  :after graphviz-dot-mode)

5.11. Markdown

Most of the time when I write markdown, it’s going into some app/website which will do it’s own line wrapping, hence we only want to use visual line wrapping. No hard stuff.

Emacs Lisp
#
(add-hook! (gfm-mode markdown-mode) #'visual-line-mode #'turn-off-auto-fill)

Since markdown is often seen as rendered HTML, let’s try to somewhat mirror the style or markdown renderers.

Most markdown renders seem to make the first three headings levels larger than normal text, the first two much so. Then the fourth level tends to be the same as body text, while the fifth and sixth are (increasingly) smaller, with the sixth greyed out. Since the sixth level is so small, I’ll turn up the boldness a notch.

Emacs Lisp
#
(custom-set-faces!
  '(markdown-header-face-1 :height 1.25 :weight extra-bold :inherit markdown-header-face)
  '(markdown-header-face-2 :height 1.15 :weight bold       :inherit markdown-header-face)
  '(markdown-header-face-3 :height 1.08 :weight bold       :inherit markdown-header-face)
  '(markdown-header-face-4 :height 1.00 :weight bold       :inherit markdown-header-face)
  '(markdown-header-face-5 :height 0.90 :weight bold       :inherit markdown-header-face)
  '(markdown-header-face-6 :height 0.75 :weight extra-bold :inherit markdown-header-face))

5.12. Beancount

There are a number of rather compelling advantages to plain text accounting, with ledger being the most obvious example. However, beancount, a more recent implementation of the idea is ledger-compatible (meaning I can switch easily if I change my mind) and has a gorgeous front-end — fava.

Of course, there’s an Emacs mode for this.

Emacs Lisp
#
(package! beancount :recipe (:host github :repo "beancount/beancount-mode")
  :pin "687775da63784d153a3c1cfee9801090c6b51842")
Emacs Lisp
#
(use-package! beancount
  :mode ("\\.beancount\\'" . beancount-mode)
  :init
  (after! all-the-icons
    (add-to-list 'all-the-icons-icon-alist
                 '("\\.beancount\\'" all-the-icons-material "attach_money" :face all-the-icons-lblue))
    (add-to-list 'all-the-icons-mode-icon-alist
                 '(beancount-mode all-the-icons-material "attach_money" :face all-the-icons-lblue)))
  :config
  (setq beancount-electric-currency t)
  (defun beancount-bal ()
    "Run bean-report bal."
    (interactive)
    (let ((compilation-read-command nil))
      (beancount--run "bean-report"
                      (file-relative-name buffer-file-name) "bal")))
  (map! :map beancount-mode-map
        :n "TAB" #'beancount-align-to-previous-number
        :i "RET" (cmd! (newline-and-indent) (beancount-align-to-previous-number))))

5.13. Snippets

5.13.1. Latex mode

File template

snippet
#
# -*- mode: snippet -*-
# name: LaTeX template                                                                                         
# --
\documentclass${1:[${2:opt1,...}]}{`(tec/yas-latex-get-class-choice)`}

\title{${3:`(s-titleized-words (file-name-base (or buffer-file-name "new buffer")))`}}
\author{${4:`(user-full-name)`}}
\date{${5:`(format-time-string "%Y-%m-%d")`}}
`(if (tec/yas-latex-preamble-if) tec/yas-latex-template-preamble "")`
\begin{document}

\maketitle

$0

\end{document}

Deliminators

snippet
#
# name: _deliminators                                                                 
# --
\left`(tec/tex-open-delim-from-char)` `%`$1 \right`(tec/tex-close-delim-from-char)` $0

Aligned equals

snippet
#
# key: ==
# name: aligned equals
# --
&= 

Begin alias

snippet
#
# -*- mode: snippet -*-
# name: begin-alias
# key: beg
# type: command
# --
(doom-snippets-expand :name "begin")

Cases

snippet
#
# -*- mode: snippet -*-
# key: cs
# name: cases
# group: math
# condition: (texmathp)
# --
\begin{cases}
  `%`$1
\end{cases}$0

Code

snippet
#
# -*- mode: snippet -*-
# name: code
# --
\begin{minted}{${1:language}}
${0:`%`}
\end{minted}

Corollary

snippet
#
# -*- mode: snippet -*-
# name: corollary
# key: clr
# group: theorems
# --
\begin{corollary}${1:[${2:name}]}
  `%`$0
\end{corollary}

Definition

snippet
#
# -*- mode: snippet -*-
# name: definition
# key: def
# group: theorems
# --
\begin{definition}${1:[${2:name}]}
  `%`$0
\end{definition}

Deliminators

snippet
#
# -*- mode: snippet -*-
# name: deliminators
# key: @
# condition: (texmathp)
# type: command                                                    
# --
(tec/get-open-delim-char)
(yas-expand-snippet (yas-lookup-snippet "_deliminators" 'latex-mode))

Deliminators angle

snippet
#
# -*- mode: snippet -*-
# name: deliminators - angle <>
# key: <
# condition: (texmathp)
# type: command                  
# --
(setq tec/tex-last-delim-char ?\<)
(setq tec/tex-delim-dot-second nil)
(tec/tex-delim-yas-expand)

Deliminators bracket

snippet
#
# -*- mode: snippet -*-
# name: deliminators - bracket []
# key: [
# condition: (texmathp)
# type: command
# --
(setq tec/tex-last-delim-char ?\[)
(setq tec/tex-delim-dot-second nil)
(tec/tex-delim-yas-expand)

Deliminators curly

snippet
#
# -*- mode: snippet -*-
# name: deliminators - curley {}
# key: {
# condition: (texmathp)
# type: command                  
# --
(setq tec/tex-last-delim-char ?\{)
(setq tec/tex-delim-dot-second nil)
(tec/tex-delim-yas-expand)

Deliminators paren

snippet
#
# -*- mode: snippet -*-
# name: deliminators - paren ()
# key: (
# condition: (texmathp)
# type: command
# --
(setq tec/tex-last-delim-char ?\()
(setq tec/tex-delim-dot-second nil)
(tec/tex-delim-yas-expand)

Enumerate

snippet
#
# -*- mode: snippet -*-
# name: enumerate
# key: en          
# --
\begin{enumerate}
`(if % % "  \\item ")`$0
\end{enumerate}

Example

snippet
#
# -*- mode: snippet -*-
# name: example
# key: eg
# group: theorems
# --
\begin{example}${1:[${2:name}]}
  `%`$0
\end{example}

Frac short

snippet
#
# -*- mode: snippet -*-
# key: /
# name: frac-short
# group: math
# condition: (texmathp)      
# --
\frac{${1:`(or % "")`}}{$2}$0

Int ^

snippet
#
# -*- mode: snippet -*-
# key: int
# name: int_^
# --
\int${1:$(when (> (length yas-text) 0) "_")
}${1:$(when (> (length yas-text) 1) "{")
}${1:left}${1:$(when (> (length yas-text) 1) "}")
}${2:$(when (> (length yas-text) 0) "^")
}${2:$(when (> (length yas-text) 1) "{")
}${2:right}${2:$(when (> (length yas-text) 1) "}")} $0

Itemize

snippet
#
# -*- mode: snippet -*-
# name: itemize
# key: it
# uuid: it              
# --
\begin{itemize}
`(if % % "  \\item ")`$0
\end{itemize}

Lemma

snippet
#
# -*- mode: snippet -*-
# name: lemma
# key: lmm
# group: theorems
# --
\begin{lemma}${1:[${2:name}]}
  `%`$0
\end{lemma}

Lim

snippet
#
# -*- mode: snippet -*-
# name: lim
# key: lim
# --
\lim_{${1:n} \to ${2:\infty}} $0

Mathclap

snippet
#
# -*- mode: snippet -*-
# key: mc
# name: mathclap
# group: math
# condition: (texmathp)
# --
\mathclap{`%`$1}$0

Prod ^

snippet
#
# key: prod
# name: prod_^
# --
\prod${1:$(when (> (length yas-text) 0) "_")
}${1:$(when (> (length yas-text) 1) "{")
}${1:i=1}${1:$(when (> (length yas-text) 1) "}")
}${2:$(when (> (length yas-text) 0) "^")
}${2:$(when (> (length yas-text) 1) "{")
}${2:n}${2:$(when (> (length yas-text) 1) "}")} $0

Proof

snippet
#
# -*- mode: snippet -*-
# name: proof
# key: prf
# group: theorems
# --
\begin{proof}${1:[${2:name}]}
  `%`$0
\end{proof}

Remark

snippet
#
# -*- mode: snippet -*-
# name: remark
# key: rmk
# group: theorems
# --
\begin{remark}${1:[${2:name}]}
  `%`$0
\end{remark}

Sum ^

snippet
#
# key: sum
# name: sum_^
# --
\sum${1:$(when (> (length yas-text) 0) "_")
}${1:$(when (> (length yas-text) 1) "{")
}${1:i=1}${1:$(when (> (length yas-text) 1) "}")
}${2:$(when (> (length yas-text) 0) "^")
}${2:$(when (> (length yas-text) 1) "{")
}${2:n}${2:$(when (> (length yas-text) 1) "}")} $0

Theorem

snippet
#
# -*- mode: snippet -*-
# name: theorem
# key: thm
# group: theorems
# --
\begin{theorem}${1:[${2:name}]}
  `%`$0
\end{theorem}

5.13.2. Markdown mode

File template

snippet
#
# -*- mode: snippet -*-
# name: Org template
# --
# ${1:`(s-titleized-words (file-name-base (or buffer-file-name "new buffer")))`}

$0

5.13.3. Org mode

File template

snippet
#
# -*- mode: snippet -*-
# name: Org template
# --
#+title: ${1:`(s-titleized-words (replace-regexp-in-string "^[0-9]\\{4\\}-[0-9][0-9]-[0-9][0-9]-" "" (file-name-base (or buffer-file-name "new buffer"))))`}
#+author: ${2:`(user-full-name)`}
#+date: ${3:`(format-time-string "%Y-%m-%d")`}

$0

Display maths

snippet
#
# -*- mode: snippet -*-
# name: display math
# key: M
# condition: t
# expand-env: ((yas-after-exit-snippet-hook (lambda () (org-edit-latex-fragment) (evil-insert-state) (insert "\n  \n") (left-char))))
# --
\\[`%`$0\\]

Elisp source

snippet
#
# -*- mode: snippet -*-
# name: elisp src
# uuid: src_elisp
# key: <el
# condition: t
# expand-env: ((yas-after-exit-snippet-hook #'org-edit-src-code))
# --
#+begin_src emacs-lisp
`%`$0
#+end_src

Global property

snippet
#
# -*- mode: snippet -*-
# name: Global property
# key: #+p
# condition: (> 20 (line-number-at-pos))
# --
#+property: $0

Header argument dir

snippet
#
# -*- mode: snippet -*-
# name: Header arg - dir
# key: d
# condition: (+yas/org-src-header-p)
# --
:dir `(file-relative-name (read-directory-name "Working directory: "))` $0

Header argument eval

snippet
#
# -*- mode: snippet -*-
# name: Header arg - eval
# key: v
# condition: (+yas/org-src-header-p)
# --
`(let ((out (+yas/org-prompt-header-arg :eval "Evaluate: " '("no" "query" "no-export" "query-export")))) (if out (concat ":eval " out " ") ""))`

Header argument export

snippet
#
# -*- mode: snippet -*-
# name: Header arg - export
# key: e
# condition: (+yas/org-src-header-p)
# --
`(let ((out (+yas/org-prompt-header-arg :exports "Exports: " '("code" "results" "both" "none")))) (if out (concat ":exports " out " ") ""))`

Header argument file

snippet
#
# -*- mode: snippet -*-
# name: Header arg - file
# key: f
# condition: (+yas/org-src-header-p)
# --
:file $0

Header argument graphics

snippet
#
# -*- mode: snippet -*-
# name: Header arg - graphics
# key: g
# condition: (+yas/org-src-header-p)
# --
:results file graphics $0

Header argument height

snippet
#
# -*- mode: snippet -*-
# name: Header arg - height
# key: H
# condition: (+yas/org-src-header-p)
# --
:height $0

Header argument noweb

snippet
#
# -*- mode: snippet -*-
# name: Header arg - noweb
# key: n
# condition: (+yas/org-src-header-p)
# --
`(let ((out (+yas/org-prompt-header-arg :noweb "NoWeb: " '("no" "yes" "tangle" "no-export" "strip-export" "eval")))) (if out (concat ":noweb " out " ") ""))`

Header argument output

snippet
#
# -*- mode: snippet -*-
# name: Header arg - output
# key: o
# condition: (+yas/org-src-header-p)
# --
:results output $0

Header argument results

snippet
#
# -*- mode: snippet -*-
# name: Header arg - results
# key: r
# condition: (+yas/org-src-header-p)
# --
`(let ((out
(string-trim-right
 (concat
  (+yas/org-prompt-header-arg :results "Result collection: " '("value " "output "))
  (+yas/org-prompt-header-arg :results "Results type: " '("table " "vector " "list " "verbatim " "file "))
  (+yas/org-prompt-header-arg :results "Results format: " '("code " "drawer " "html " "latex " "link " "graphics " "org " "pp " "raw "))
  (+yas/org-prompt-header-arg :results "Result output: " '("silent " "replace " "append " "prepend "))))))
  (if (string= out "") ""
  (concat ":results " out " ")))
`

Header argument session

snippet
#
# -*- mode: snippet -*-
# name: Header arg - session
# key: S
# condition: (+yas/org-src-header-p)
# --
:session "${1:`(file-name-base (or (buffer-file-name) "unnnamed"))`-session}" $0

Header argument silent

snippet
#
# -*- mode: snippet -*-
# name: Header arg - silent
# key: s
# condition: (+yas/org-src-header-p)
# --
:results silent $0

Header argument tangle

snippet
#
# -*- mode: snippet -*-
# name: Header arg - tangle
# key: t
# condition: (+yas/org-src-header-p)
# --
:tangle $0

Header argument width

snippet
#
# -*- mode: snippet -*-
# name: Header arg - width
# key: W
# condition: (+yas/org-src-header-p)
# --
:width $0

Header argument wrap

snippet
#
# -*- mode: snippet -*-
# name: Header arg - wrap
# key: w
# condition: (+yas/org-src-header-p)
# --
`(let ((out (+yas/org-prompt-header-arg :noweb "Wrap: " '("example" "export" "comment" "src")))) (if out (concat ":wrap " out " ") ""))`

Inline math

snippet
#
# -*- mode: snippet -*-
# name: inline math
# key: m
# condition: t
# expand-env: ((yas-after-exit-snippet-hook (lambda () (org-edit-latex-fragment) (evil-insert-state) (goto-char 3))))
# --
\\(`%`$0\\)

Property header arguments

snippet
#
# -*- mode: snippet -*-
# name: Property - header arg
# key: h
# condition: (or (looking-back "^#\\+PROPERTY:.*" (line-beginning-position)) (looking-back "^#\\+property:.*" (line-beginning-position)))
# --
header-args:${1:`(or (+yas/org-most-common-no-property-lang) "?")`} $0

Python source

snippet
#
# -*- mode: snippet -*-
# name: python src
# uuid: src_python
# key: <py
# condition: t
# expand-env: ((yas-after-exit-snippet-hook #'org-edit-src-code))
# --
#+begin_src python
`%`$0
#+end_src

Source

snippet
#
# -*- mode: snippet -*-
# name: #+begin_src
# uuid: src
# key: src
# --
#+begin_src ${1:`(or (+yas/org-last-src-lang) "?")`}
`%`$0
#+end_src

Date: 2023-01-29 18:26 UTC, a909f02

Author: pratikvn

Created: 2023-02-01 Wed 01:31